diff --git a/configure b/configure
index ba41a33c99..e341d70de7 100755
--- a/configure
+++ b/configure
@@ -15,10 +15,10 @@
 # NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
 # WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-# From configure.in Revision: 1.186 
+# From configure.in Revision: 1.188 
 
 ## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
-## Copyright (C) 1996-1999 Free Software Foundation, Inc.
+## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc.
 ## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 ##
 ## This program is free software; you can redistribute it and/or modify
@@ -91,23 +91,27 @@
 
 
 # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
+# the libltdl convenience library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments.  Note that LIBLTDL and INCLTDL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
+# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
+# with '${top_builddir}/' and INCLTDL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
 
 
 # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
+# the libltdl installable library and INCLTDL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
+# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!).  If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
 
 
@@ -691,7 +695,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:695: checking host system type" >&5
+echo "configure:699: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -713,7 +717,7 @@ echo "$ac_t""$host" 1>&6
 
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:717: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:721: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -742,7 +746,7 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:746: checking for $ac_word" >&5
+echo "configure:750: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -781,7 +785,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:785: checking for a BSD compatible install" >&5
+echo "configure:789: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -842,7 +846,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:846: checking for $ac_word" >&5
+echo "configure:850: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -898,7 +902,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:902: checking for $ac_word" >&5
+echo "configure:906: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_ETAGS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -943,7 +947,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:947: checking for $ac_word" >&5
+echo "configure:951: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1045,7 +1049,7 @@ esac
 # Decide whether to use multithreading or not.
 #
 echo $ac_n "checking whether to use threads""... $ac_c" 1>&6
-echo "configure:1049: checking whether to use threads" >&5
+echo "configure:1053: checking whether to use threads" >&5
 # Check whether --enable-threads or --disable-threads was given.
 if test "${enable_threads+set}" = set; then
   enableval="$enable_threads"
@@ -1123,14 +1127,14 @@ fi
 # Find the machine's endian flavor.
 #
 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:1127: checking whether byte ordering is bigendian" >&5
+echo "configure:1131: checking whether byte ordering is bigendian" >&5
 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_bigendian=unknown
 # See if sys/param.h defines the BYTE_ORDER macro.
 cat > conftest.$ac_ext <<EOF
-#line 1134 "configure"
+#line 1138 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -1141,11 +1145,11 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1145: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1149: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   # It does; now see whether it defined to BIG_ENDIAN or not.
 cat > conftest.$ac_ext <<EOF
-#line 1149 "configure"
+#line 1153 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -1156,7 +1160,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1160: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1164: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_bigendian=yes
 else
@@ -1176,7 +1180,7 @@ if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 1180 "configure"
+#line 1184 "configure"
 #include "confdefs.h"
 main () {
   /* Are we little or big endian?  From Harbison&Steele.  */
@@ -1189,7 +1193,7 @@ main () {
   exit (u.c[sizeof (long) - 1] == 1);
 }
 EOF
-if { (eval echo configure:1193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_bigendian=no
 else
@@ -1217,7 +1221,7 @@ fi
 # was --with-openssl specified?
 #
 echo $ac_n "checking for compatible OpenSSL library""... $ac_c" 1>&6
-echo "configure:1221: checking for compatible OpenSSL library" >&5
+echo "configure:1225: checking for compatible OpenSSL library" >&5
 # Check whether --with-openssl or --without-openssl was given.
 if test "${with_openssl+set}" = set; then
   withval="$with_openssl"
@@ -1274,7 +1278,7 @@ esac
 # was --with-gssapi specified?
 #
 echo $ac_n "checking for GSSAPI library""... $ac_c" 1>&6
-echo "configure:1278: checking for GSSAPI library" >&5
+echo "configure:1282: checking for GSSAPI library" >&5
 # Check whether --with-gssapi or --without-gssapi was given.
 if test "${with_gssapi+set}" = set; then
   withval="$with_gssapi"
@@ -1310,7 +1314,7 @@ esac
 # was --with-randomdev specified?
 #
 echo $ac_n "checking for random device""... $ac_c" 1>&6
-echo "configure:1314: checking for random device" >&5
+echo "configure:1318: checking for random device" >&5
 # Check whether --with-randomdev or --without-randomdev was given.
 if test "${with_randomdev+set}" = set; then
   withval="$with_randomdev"
@@ -1357,7 +1361,7 @@ esac
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1361: checking for $ac_word" >&5
+echo "configure:1365: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1387,7 +1391,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1391: checking for $ac_word" >&5
+echo "configure:1395: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1438,7 +1442,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1442: checking for $ac_word" >&5
+echo "configure:1446: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1470,7 +1474,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1474: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1478: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1481,12 +1485,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1485 "configure"
+#line 1489 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1512,12 +1516,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1516: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1520: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1521: checking whether we are using GNU C" >&5
+echo "configure:1525: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1526,7 +1530,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1530: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1534: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1545,7 +1549,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1549: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1553: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1581,7 +1585,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1585: checking for $ac_word" >&5
+echo "configure:1589: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1613,7 +1617,7 @@ test -n "$YACC" || YACC="yacc"
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1617: checking how to run the C preprocessor" >&5
+echo "configure:1621: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1628,13 +1632,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1632 "configure"
+#line 1636 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1642: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1645,13 +1649,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1649 "configure"
+#line 1653 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1655: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1659: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1662,13 +1666,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1666 "configure"
+#line 1670 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1672: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1676: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1693,12 +1697,12 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1697: checking for ANSI C header files" >&5
+echo "configure:1701: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1702 "configure"
+#line 1706 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1706,7 +1710,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1714: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1723,7 +1727,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1727 "configure"
+#line 1731 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -1741,7 +1745,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1745 "configure"
+#line 1749 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -1762,7 +1766,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 1766 "configure"
+#line 1770 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1773,7 +1777,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:1777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -1801,17 +1805,17 @@ for ac_hdr in fcntl.h sys/time.h unistd.h sys/sockio.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1805: checking for $ac_hdr" >&5
+echo "configure:1809: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1810 "configure"
+#line 1814 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1815: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1839,12 +1843,12 @@ done
 
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1843: checking for working const" >&5
+echo "configure:1847: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1848 "configure"
+#line 1852 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1893,7 +1897,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:1897: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1901: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -1914,21 +1918,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1918: checking for inline" >&5
+echo "configure:1922: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 1925 "configure"
+#line 1929 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:1932: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1936: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -1954,12 +1958,12 @@ EOF
 esac
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1958: checking for size_t" >&5
+echo "configure:1962: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1963 "configure"
+#line 1967 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1987,12 +1991,12 @@ EOF
 fi
 
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1991: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1995: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1996 "configure"
+#line 2000 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -2001,7 +2005,7 @@ int main() {
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:2005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2009: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -2038,7 +2042,7 @@ then
 		# experiment with it.
 		CC="gcc"
 		echo $ac_n "checking which NetBSD thread library to use""... $ac_c" 1>&6
-echo "configure:2042: checking which NetBSD thread library to use" >&5
+echo "configure:2046: checking which NetBSD thread library to use" >&5
 
 		# Check whether --with-ptl2 or --without-ptl2 was given.
 if test "${with_ptl2+set}" = set; then
@@ -2077,7 +2081,7 @@ Please install the devel/unproven-pthreads package and rerun configure.
 		;;
 		*)
 			echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:2081: checking for pthread_create in -lpthread" >&5
+echo "configure:2085: checking for pthread_create in -lpthread" >&5
 ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2085,7 +2089,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2089 "configure"
+#line 2093 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2096,7 +2100,7 @@ int main() {
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:2100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2122,7 +2126,7 @@ EOF
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for __pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:2126: checking for __pthread_create in -lpthread" >&5
+echo "configure:2130: checking for __pthread_create in -lpthread" >&5
 ac_lib_var=`echo pthread'_'__pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2130,7 +2134,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2134 "configure"
+#line 2138 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2141,7 +2145,7 @@ int main() {
 __pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:2145: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2169,7 +2173,7 @@ else
 fi
 
 			     echo $ac_n "checking for __pthread_create_system in -lpthread""... $ac_c" 1>&6
-echo "configure:2173: checking for __pthread_create_system in -lpthread" >&5
+echo "configure:2177: checking for __pthread_create_system in -lpthread" >&5
 ac_lib_var=`echo pthread'_'__pthread_create_system | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2177,7 +2181,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2181 "configure"
+#line 2185 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2188,7 +2192,7 @@ int main() {
 __pthread_create_system()
 ; return 0; }
 EOF
-if { (eval echo configure:2192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2216,7 +2220,7 @@ else
 fi
 
 			     echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:2220: checking for pthread_create in -lpthreads" >&5
+echo "configure:2224: checking for pthread_create in -lpthreads" >&5
 ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2224,7 +2228,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthreads  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2228 "configure"
+#line 2232 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2235,7 +2239,7 @@ int main() {
 pthread_create()
 ; return 0; }
 EOF
-if { (eval echo configure:2239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2271,7 +2275,7 @@ fi
 	# We'd like to use sigwait() too
 	#
 	echo $ac_n "checking for sigwait in -lc""... $ac_c" 1>&6
-echo "configure:2275: checking for sigwait in -lc" >&5
+echo "configure:2279: checking for sigwait in -lc" >&5
 ac_lib_var=`echo c'_'sigwait | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2279,7 +2283,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lc  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2283 "configure"
+#line 2287 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2290,7 +2294,7 @@ int main() {
 sigwait()
 ; return 0; }
 EOF
-if { (eval echo configure:2294: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2312,7 +2316,7 @@ EOF
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for sigwait in -lpthread""... $ac_c" 1>&6
-echo "configure:2316: checking for sigwait in -lpthread" >&5
+echo "configure:2320: checking for sigwait in -lpthread" >&5
 ac_lib_var=`echo pthread'_'sigwait | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2320,7 +2324,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2324 "configure"
+#line 2328 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2331,7 +2335,7 @@ int main() {
 sigwait()
 ; return 0; }
 EOF
-if { (eval echo configure:2335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2353,7 +2357,7 @@ EOF
 else
   echo "$ac_t""no" 1>&6
 echo $ac_n "checking for _Psigwait in -lpthread""... $ac_c" 1>&6
-echo "configure:2357: checking for _Psigwait in -lpthread" >&5
+echo "configure:2361: checking for _Psigwait in -lpthread" >&5
 ac_lib_var=`echo pthread'_'_Psigwait | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2361,7 +2365,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lpthread  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2365 "configure"
+#line 2369 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2372,7 +2376,7 @@ int main() {
 _Psigwait()
 ; return 0; }
 EOF
-if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2380: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2410,7 +2414,7 @@ fi
 		#
 		*-freebsd*)
 			echo $ac_n "checking for sigwait in -lc_r""... $ac_c" 1>&6
-echo "configure:2414: checking for sigwait in -lc_r" >&5
+echo "configure:2418: checking for sigwait in -lc_r" >&5
 ac_lib_var=`echo c_r'_'sigwait | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2418,7 +2422,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lc_r  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2422 "configure"
+#line 2426 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2429,7 +2433,7 @@ int main() {
 sigwait()
 ; return 0; }
 EOF
-if { (eval echo configure:2433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2484,12 +2488,12 @@ EOF
 EOF
 
 			echo $ac_n "checking for pthread_setconcurrency""... $ac_c" 1>&6
-echo "configure:2488: checking for pthread_setconcurrency" >&5
+echo "configure:2492: checking for pthread_setconcurrency" >&5
 if eval "test \"`echo '$''{'ac_cv_func_pthread_setconcurrency'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2493 "configure"
+#line 2497 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char pthread_setconcurrency(); below.  */
@@ -2512,7 +2516,7 @@ pthread_setconcurrency();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_pthread_setconcurrency=yes"
 else
@@ -2550,12 +2554,12 @@ EOF
 	# Look for sysconf to allow detection of the number of processors.
 	#
 	echo $ac_n "checking for sysconf""... $ac_c" 1>&6
-echo "configure:2554: checking for sysconf" >&5
+echo "configure:2558: checking for sysconf" >&5
 if eval "test \"`echo '$''{'ac_cv_func_sysconf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2559 "configure"
+#line 2563 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char sysconf(); below.  */
@@ -2578,7 +2582,7 @@ sysconf();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2586: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_sysconf=yes"
 else
@@ -2659,12 +2663,12 @@ ISC_THREAD_DIR=$thread_dir
 # even if compiled with --disable-threads.
 #
 echo $ac_n "checking for flockfile""... $ac_c" 1>&6
-echo "configure:2663: checking for flockfile" >&5
+echo "configure:2667: checking for flockfile" >&5
 if eval "test \"`echo '$''{'ac_cv_func_flockfile'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2668 "configure"
+#line 2672 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char flockfile(); below.  */
@@ -2687,7 +2691,7 @@ flockfile();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_flockfile=yes"
 else
@@ -2714,12 +2718,12 @@ fi
 # NLS
 #
 echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:2718: checking for catgets" >&5
+echo "configure:2722: checking for catgets" >&5
 if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2723 "configure"
+#line 2727 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char catgets(); below.  */
@@ -2742,7 +2746,7 @@ catgets();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2750: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_catgets=yes"
 else
@@ -2780,7 +2784,7 @@ case "$host" in
 		;;
 	*)
 		echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:2784: checking for socket in -lsocket" >&5
+echo "configure:2788: checking for socket in -lsocket" >&5
 ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2788,7 +2792,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lsocket  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2792 "configure"
+#line 2796 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2799,7 +2803,7 @@ int main() {
 socket()
 ; return 0; }
 EOF
-if { (eval echo configure:2803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2827,7 +2831,7 @@ else
 fi
 
 		echo $ac_n "checking for inet_ntoa in -lnsl""... $ac_c" 1>&6
-echo "configure:2831: checking for inet_ntoa in -lnsl" >&5
+echo "configure:2835: checking for inet_ntoa in -lnsl" >&5
 ac_lib_var=`echo nsl'_'inet_ntoa | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2835,7 +2839,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lnsl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2839 "configure"
+#line 2843 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2846,7 +2850,7 @@ int main() {
 inet_ntoa()
 ; return 0; }
 EOF
-if { (eval echo configure:2850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2998,7 +3002,7 @@ else
 fi
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:3002: checking build system type" >&5
+echo "configure:3006: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -3027,7 +3031,7 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:3031: checking for ld used by GCC" >&5
+echo "configure:3035: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
@@ -3051,10 +3055,10 @@ echo "configure:3031: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:3055: checking for GNU ld" >&5
+echo "configure:3059: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:3058: checking for non-GNU ld" >&5
+echo "configure:3062: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3088,9 +3092,8 @@ else
   echo "$ac_t""no" 1>&6
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:3094: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:3097: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3106,7 +3109,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:3110: checking for BSD-compatible nm" >&5
+echo "configure:3113: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3141,9 +3144,8 @@ fi
 NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
-
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:3147: checking whether ln -s works" >&5
+echo "configure:3149: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3164,6 +3166,11 @@ else
 fi
 
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
@@ -3184,11 +3191,11 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 3191 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:3192: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 3198 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:3199: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -3209,19 +3216,19 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:3213: checking whether the C compiler needs -belf" >&5
+echo "configure:3220: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3218 "configure"
+#line 3225 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -3299,7 +3306,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
 LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
 DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
@@ -3372,9 +3379,9 @@ esac
 # the right suffix on the files.
 #
 echo $ac_n "checking for IPv6 structures""... $ac_c" 1>&6
-echo "configure:3376: checking for IPv6 structures" >&5
+echo "configure:3383: checking for IPv6 structures" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3378 "configure"
+#line 3385 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3384,7 +3391,7 @@ int main() {
 struct sockaddr_in6 sin6; return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3388: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3395: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	 found_ipv6=yes
@@ -3402,7 +3409,7 @@ rm -f conftest*
 # This is done before other IPv6 linking tests to LIBS is properly set.
 #
 echo $ac_n "checking for Kame IPv6 support""... $ac_c" 1>&6
-echo "configure:3406: checking for Kame IPv6 support" >&5
+echo "configure:3413: checking for Kame IPv6 support" >&5
 # Check whether --with-kame or --without-kame was given.
 if test "${with_kame+set}" = set; then
   withval="$with_kame"
@@ -3490,9 +3497,9 @@ case "$found_ipv6" in
 		LWRES_PLATFORM_HAVEIPV6="#define LWRES_PLATFORM_HAVEIPV6 1"
 
 		echo $ac_n "checking for in6addr_any""... $ac_c" 1>&6
-echo "configure:3494: checking for in6addr_any" >&5
+echo "configure:3501: checking for in6addr_any" >&5
 		cat > conftest.$ac_ext <<EOF
-#line 3496 "configure"
+#line 3503 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3503,7 +3510,7 @@ int main() {
 struct in6_addr in6; in6 = in6addr_any; return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 			 ISC_PLATFORM_NEEDIN6ADDRANY="#undef ISC_PLATFORM_NEEDIN6ADDRANY"
@@ -3519,9 +3526,9 @@ fi
 rm -f conftest*
 
 		echo $ac_n "checking for sin6_scope_id in struct sockaddr_in6""... $ac_c" 1>&6
-echo "configure:3523: checking for sin6_scope_id in struct sockaddr_in6" >&5
+echo "configure:3530: checking for sin6_scope_id in struct sockaddr_in6" >&5
 		cat > conftest.$ac_ext <<EOF
-#line 3525 "configure"
+#line 3532 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3534,7 +3541,7 @@ int main() {
 struct sockaddr_in6 xyzzy; xyzzy.sin6_scope_id = 0; return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3538: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3545: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 			 result="#define LWRES_HAVE_SIN6_SCOPE_ID 1"
@@ -3549,9 +3556,9 @@ rm -f conftest*
 		LWRES_HAVE_SIN6_SCOPE_ID="$result"
 
 		echo $ac_n "checking for in6_pktinfo""... $ac_c" 1>&6
-echo "configure:3553: checking for in6_pktinfo" >&5
+echo "configure:3560: checking for in6_pktinfo" >&5
 		cat > conftest.$ac_ext <<EOF
-#line 3555 "configure"
+#line 3562 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3564,7 +3571,7 @@ int main() {
 struct in6_pktinfo xyzzy; return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3575: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 			 ISC_PLATFORM_HAVEIN6PKTINFO="#define ISC_PLATFORM_HAVEIN6PKTINFO 1"
@@ -3613,9 +3620,9 @@ esac
 # which provides some (all?) of the desired functions.
 #
 echo $ac_n "checking for inet_ntop""... $ac_c" 1>&6
-echo "configure:3617: checking for inet_ntop" >&5
+echo "configure:3624: checking for inet_ntop" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3619 "configure"
+#line 3626 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3625,7 +3632,7 @@ int main() {
 inet_ntop(0, 0, 0, 0); return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
         ISC_PLATFORM_NEEDNTOP="#undef ISC_PLATFORM_NEEDNTOP"
@@ -3640,9 +3647,9 @@ else
 fi
 rm -f conftest*
 echo $ac_n "checking for inet_pton""... $ac_c" 1>&6
-echo "configure:3644: checking for inet_pton" >&5
+echo "configure:3651: checking for inet_pton" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3646 "configure"
+#line 3653 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3652,7 +3659,7 @@ int main() {
 inet_pton(0, 0, 0); return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
         ISC_PLATFORM_NEEDPTON="#undef ISC_PLATFORM_NEEDPTON"
@@ -3667,9 +3674,9 @@ else
 fi
 rm -f conftest*
 echo $ac_n "checking for inet_aton""... $ac_c" 1>&6
-echo "configure:3671: checking for inet_aton" >&5
+echo "configure:3678: checking for inet_aton" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3673 "configure"
+#line 3680 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3679,7 +3686,7 @@ int main() {
 struct in_addr in; inet_aton(0, &in); return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
         ISC_PLATFORM_NEEDATON="#undef ISC_PLATFORM_NEEDATON"
@@ -3712,9 +3719,9 @@ EOF
 esac
 
 echo $ac_n "checking for sa_len in struct sockaddr""... $ac_c" 1>&6
-echo "configure:3716: checking for sa_len in struct sockaddr" >&5
+echo "configure:3723: checking for sa_len in struct sockaddr" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3718 "configure"
+#line 3725 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3723,7 +3730,7 @@ int main() {
 struct sockaddr sa; sa.sa_len = 0; return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3727: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3734: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_PLATFORM_HAVESALEN="#define ISC_PLATFORM_HAVESALEN 1"
@@ -3744,9 +3751,9 @@ rm -f conftest*
 # Look for a 4.4BSD or 4.3BSD struct msghdr
 #
 echo $ac_n "checking for struct msghdr flavor""... $ac_c" 1>&6
-echo "configure:3748: checking for struct msghdr flavor" >&5
+echo "configure:3755: checking for struct msghdr flavor" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3750 "configure"
+#line 3757 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3755,7 +3762,7 @@ int main() {
 struct msghdr msg; msg.msg_flags = 0; return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""4.4BSD" 1>&6
 	ISC_PLATFORM_MSGHDRFLAVOR="#define ISC_NET_BSD44MSGHDR 1"
@@ -3773,9 +3780,9 @@ rm -f conftest*
 # Look for in_port_t.
 #
 echo $ac_n "checking for type in_port_t""... $ac_c" 1>&6
-echo "configure:3777: checking for type in_port_t" >&5
+echo "configure:3784: checking for type in_port_t" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3779 "configure"
+#line 3786 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3784,7 +3791,7 @@ int main() {
 in_port_t port = 25; return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3795: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_PLATFORM_NEEDPORTT="#undef ISC_PLATFORM_NEEDPORTT"
@@ -3802,9 +3809,9 @@ rm -f conftest*
 # Check for addrinfo
 #
 echo $ac_n "checking for struct addrinfo""... $ac_c" 1>&6
-echo "configure:3806: checking for struct addrinfo" >&5
+echo "configure:3813: checking for struct addrinfo" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3808 "configure"
+#line 3815 "configure"
 #include "confdefs.h"
 
 #include <netdb.h>
@@ -3812,7 +3819,7 @@ int main() {
 struct addrinfo a; return (0);
 ; return 0; }
 EOF
-if { (eval echo configure:3816: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3823: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_LWRES_NEEDADDRINFO="#undef ISC_LWRES_NEEDADDRINFO"
@@ -3831,9 +3838,9 @@ rm -f conftest*
 
 
 echo $ac_n "checking for int sethostent""... $ac_c" 1>&6
-echo "configure:3835: checking for int sethostent" >&5
+echo "configure:3842: checking for int sethostent" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3837 "configure"
+#line 3844 "configure"
 #include "confdefs.h"
 
 #include <netdb.h>
@@ -3841,7 +3848,7 @@ int main() {
 int i = sethostent(0); return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:3845: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3852: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_LWRES_SETHOSTENTINT="#define ISC_LWRES_SETHOSTENTINT 1"
@@ -3856,9 +3863,9 @@ rm -f conftest*
 
 
 echo $ac_n "checking for int endhostent""... $ac_c" 1>&6
-echo "configure:3860: checking for int endhostent" >&5
+echo "configure:3867: checking for int endhostent" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3862 "configure"
+#line 3869 "configure"
 #include "confdefs.h"
 
 #include <netdb.h>
@@ -3866,7 +3873,7 @@ int main() {
 int i = endhostent(); return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:3870: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_LWRES_ENDHOSTENTINT="#define ISC_LWRES_ENDHOSTENTINT 1"
@@ -3881,9 +3888,9 @@ rm -f conftest*
 
 
 echo $ac_n "checking for getnetbyaddr(in_addr_t, ...)""... $ac_c" 1>&6
-echo "configure:3885: checking for getnetbyaddr(in_addr_t, ...)" >&5
+echo "configure:3892: checking for getnetbyaddr(in_addr_t, ...)" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3887 "configure"
+#line 3894 "configure"
 #include "confdefs.h"
 
 #include <netdb.h>
@@ -3892,7 +3899,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:3896: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3903: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_LWRES_GETNETBYADDRINADDR="#define ISC_LWRES_GETNETBYADDRINADDR 1"
@@ -3907,9 +3914,9 @@ rm -f conftest*
 
 
 echo $ac_n "checking for int setnetent""... $ac_c" 1>&6
-echo "configure:3911: checking for int setnetent" >&5
+echo "configure:3918: checking for int setnetent" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3913 "configure"
+#line 3920 "configure"
 #include "confdefs.h"
 
 #include <netdb.h>
@@ -3917,7 +3924,7 @@ int main() {
 int i = setnetent(0); return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:3921: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3928: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_LWRES_SETNETENTINT="#define ISC_LWRES_SETNETENTINT 1"
@@ -3932,9 +3939,9 @@ rm -f conftest*
 
 
 echo $ac_n "checking for int endnetent""... $ac_c" 1>&6
-echo "configure:3936: checking for int endnetent" >&5
+echo "configure:3943: checking for int endnetent" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3938 "configure"
+#line 3945 "configure"
 #include "confdefs.h"
 
 #include <netdb.h>
@@ -3942,7 +3949,7 @@ int main() {
 int i = endnetent(); return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:3946: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3953: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_LWRES_ENDNETENTINT="#define ISC_LWRES_ENDNETENTINT 1"
@@ -3956,10 +3963,10 @@ fi
 rm -f conftest*
 
 
-echo $ac_n "checking for gethostbyadd(const void *, size_t, ...)""... $ac_c" 1>&6
-echo "configure:3961: checking for gethostbyadd(const void *, size_t, ...)" >&5
+echo $ac_n "checking for gethostbyaddr(const void *, size_t, ...)""... $ac_c" 1>&6
+echo "configure:3968: checking for gethostbyaddr(const void *, size_t, ...)" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3963 "configure"
+#line 3970 "configure"
 #include "confdefs.h"
 
 #include <netdb.h>
@@ -3968,7 +3975,7 @@ int main() {
 return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:3972: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3979: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_LWRES_GETHOSTBYADDRVOID="#define ISC_LWRES_GETHOSTBYADDRVOID 1"
@@ -3983,9 +3990,9 @@ rm -f conftest*
 
 
 echo $ac_n "checking for h_errno in netdb.h""... $ac_c" 1>&6
-echo "configure:3987: checking for h_errno in netdb.h" >&5
+echo "configure:3994: checking for h_errno in netdb.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 3989 "configure"
+#line 3996 "configure"
 #include "confdefs.h"
 
 #include <netdb.h>
@@ -3993,7 +4000,7 @@ int main() {
 h_errno = 1; return(0);
 ; return 0; }
 EOF
-if { (eval echo configure:3997: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4004: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 	ISC_LWRES_NEEDHERRNO="#undef ISC_LWRES_NEEDHERRNO"
@@ -4008,12 +4015,12 @@ rm -f conftest*
 
 
 echo $ac_n "checking for getipnodebyname""... $ac_c" 1>&6
-echo "configure:4012: checking for getipnodebyname" >&5
+echo "configure:4019: checking for getipnodebyname" >&5
 if eval "test \"`echo '$''{'ac_cv_func_getipnodebyname'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4017 "configure"
+#line 4024 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char getipnodebyname(); below.  */
@@ -4036,7 +4043,7 @@ getipnodebyname();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4040: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4047: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_getipnodebyname=yes"
 else
@@ -4057,12 +4064,12 @@ ISC_LWRES_GETIPNODEPROTO="#define ISC_LWRES_GETIPNODEPROTO 1"
 fi
 
 echo $ac_n "checking for getnameinfo""... $ac_c" 1>&6
-echo "configure:4061: checking for getnameinfo" >&5
+echo "configure:4068: checking for getnameinfo" >&5
 if eval "test \"`echo '$''{'ac_cv_func_getnameinfo'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4066 "configure"
+#line 4073 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char getnameinfo(); below.  */
@@ -4085,7 +4092,7 @@ getnameinfo();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4089: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_getnameinfo=yes"
 else
@@ -4106,12 +4113,12 @@ ISC_LWRES_GETNAMEINFOPROTO="#define ISC_LWRES_GETNAMEINFOPROTO 1"
 fi
 
 echo $ac_n "checking for getaddrinfo""... $ac_c" 1>&6
-echo "configure:4110: checking for getaddrinfo" >&5
+echo "configure:4117: checking for getaddrinfo" >&5
 if eval "test \"`echo '$''{'ac_cv_func_getaddrinfo'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4115 "configure"
+#line 4122 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char getaddrinfo(); below.  */
@@ -4134,7 +4141,7 @@ getaddrinfo();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4145: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_getaddrinfo=yes"
 else
@@ -4166,9 +4173,9 @@ fi
 # Look for a sysctl call to get the list of network interfaces.
 #
 echo $ac_n "checking for interface list sysctl""... $ac_c" 1>&6
-echo "configure:4170: checking for interface list sysctl" >&5
+echo "configure:4177: checking for interface list sysctl" >&5
 cat > conftest.$ac_ext <<EOF
-#line 4172 "configure"
+#line 4179 "configure"
 #include "confdefs.h"
 
 #include <sys/param.h>
@@ -4198,12 +4205,12 @@ rm -f conftest*
 # Check for some other useful functions that are not ever-present.
 #
 echo $ac_n "checking for strsep""... $ac_c" 1>&6
-echo "configure:4202: checking for strsep" >&5
+echo "configure:4209: checking for strsep" >&5
 if eval "test \"`echo '$''{'ac_cv_func_strsep'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4207 "configure"
+#line 4214 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char strsep(); below.  */
@@ -4226,7 +4233,7 @@ strsep();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_strsep=yes"
 else
@@ -4247,12 +4254,12 @@ ISC_PLATFORM_NEEDSTRSEP="#define ISC_PLATFORM_NEEDSTRSEP 1"
 fi
 
 echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6
-echo "configure:4251: checking for vsnprintf" >&5
+echo "configure:4258: checking for vsnprintf" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vsnprintf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4256 "configure"
+#line 4263 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vsnprintf(); below.  */
@@ -4275,7 +4282,7 @@ vsnprintf();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4279: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vsnprintf=yes"
 else
@@ -4304,17 +4311,17 @@ fi
 
 
 echo $ac_n "checking for sizeof(long long int) == sizeof(long int)""... $ac_c" 1>&6
-echo "configure:4308: checking for sizeof(long long int) == sizeof(long int)" >&5
+echo "configure:4315: checking for sizeof(long long int) == sizeof(long int)" >&5
 if test "$cross_compiling" = yes; then
   echo "$ac_t""default yes" 1>&6
 	ISC_PLATFORM_LONGLONGEQUALLONG="#define ISC_PLATFORM_LONGLONGEQUALLONG 1"
 else
   cat > conftest.$ac_ext <<EOF
-#line 4314 "configure"
+#line 4321 "configure"
 #include "confdefs.h"
 main() { exit(!(sizeof(long long int) == sizeof(long int))); }
 EOF
-if { (eval echo configure:4318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   echo "$ac_t""yes" 1>&6
 	ISC_PLATFORM_LONGLONGEQUALLONG="#define ISC_PLATFORM_LONGLONGEQUALLONG 1"
@@ -4334,12 +4341,12 @@ fi
 # Security Stuff
 #
 echo $ac_n "checking for chroot""... $ac_c" 1>&6
-echo "configure:4338: checking for chroot" >&5
+echo "configure:4345: checking for chroot" >&5
 if eval "test \"`echo '$''{'ac_cv_func_chroot'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4343 "configure"
+#line 4350 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char chroot(); below.  */
@@ -4362,7 +4369,7 @@ chroot();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_chroot=yes"
 else
@@ -4388,17 +4395,17 @@ for ac_hdr in linux/capability.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4392: checking for $ac_hdr" >&5
+echo "configure:4399: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4397 "configure"
+#line 4404 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4402: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4409: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4428,17 +4435,17 @@ for ac_hdr in linux/prctl.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4432: checking for $ac_hdr" >&5
+echo "configure:4439: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4437 "configure"
+#line 4444 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4442: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4449: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4814,8 +4821,6 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
 s%@LN_S@%$LN_S%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@O@%$O%g