Remove the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Remove the use of source ports for parental-agents.
Also remove the deprecated options use-{v4,v6}-udp-ports and
avoid-{v4,v6}udp-ports.
On systems where root access is needed to configure privileged
ports, we don't want to fully relinquish root privileges until
after the control channel (which typically runs on port 953) has
been established.
named_os_changeuser() now takes a boolean argument 'permanent'.
This allows us to switch the effective userid temporarily with
named_os_changeuser(false) and restore it with named_os_restoreuser(),
before permanently dropping privileges with named_os_changeuser(true).
This limits the maximum number of received incremental zone
transfer differences for a secondary server. Upon reaching the
confgiured limit, the secondary aborts IXFR and initiates a full
zone transfer (AXFR).
Add the code and documentation required to provide KSR import using
rndc. This is just the command, and the feature is at this point in
time still not implemented.
Add a new configuration option to enable Offline KSK key management.
Offline KSK cannot work with CSK because it splits how keys with the
KSK and ZSK role operate. Therefore, one key cannot have both roles.
Add a configuration check to ensure this.
named now prints its initial working directory during startup and the
changed working directory when loading or reloading its configuration
file if it has a valid 'directory' option defined.
It looks like that all supported systems now have support for
_POSIX_SAVED_IDS, so it's safe to use setegid() and setegid() because
those will not change saved used/group IDs.
The new
isc_log_createandusechannel() function combines following calls:
isc_log_createchannel()
isc_log_usechannel()
calls into a single call that cannot fail and therefore can be used in
places where we know this cannot fail thus simplifying the error
handling.
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
The shim implementation of setresuid() was wrong - there was a copy and
paste error and it was calling setresgid() instead. This only affects
NetBSD because Linux, FreeBSD and OpenBSD have setresuid() and
setresgid() implementation available from the system library.
As we now setup the logging very early, parsing the default config would
always print warnings about experimental (and possibly deprecated)
options in the default config. This would even mess with commands like
`named -V` and it is also wrong to warn users about using experimental
options in the default config, because they can't do anything about
this. Add CFG_PCTX_NODEPRECATED and CFG_PCTX_NOEXPERIMENTAL options
that we can pass to cfg parser and silence the early warnings caused by
using experimental options in the default config.
This condition in catalog zone processing functions is checked only
for sanity, so there is no meaning for a log message that normally
shouldn't be ever logged.
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
Instead of calling dst_lib_init() and dst_lib_destroy() explicitly by
all the programs, create a separate memory context for the DST subsystem
and use the library constructor and destructor to initialize the DST
internals.
OpenSSL_version() first appeared in OpenSSL 1.1.0 and have been
available since LibreSSL 2.7.1 and OpenBSD 6.3, thus we can remove the
compatibility shims with older versions that are not supported anymore.
Since the support for OpenSSL Engines has been removed, we can now also
remove the checks for OPENSSL_API_LEVEL; The OpenSSL 3.x APIs will be
used when compiling with OpenSSL 3.x, and OpenSSL 1.1.xx APIs will be
used only when OpenSSL 1.1.x is used.
The OpenSSL 1.x Engines support has been deprecated in the OpenSSL 3.x
and is going to be removed. Remove the OpenSSL Engine support in favor
of OpenSSL Providers.
The isc_mem_create() in printversion() was created outside of an #ifdef
HAVE_GEOIP, but destroyed inside the #ifdef; move it to the outside of
the #ifdef where it belongs.
This is really a nit as we immediately exit() after printing the
versions, but I found it and it would bug me for the rest of my life.
Since the minimal OpenSSL version is now OpenSSL 1.1.1, remove all kind
of OpenSSL shims and checks for functions that are now always present in
the OpenSSL libraries.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Aydın Mercan <aydin@isc.org>
When automatic-interface-scan is disabled, the route socket was still
being opened. Add new API to connect / disconnect from the route socket
only as needed.
Additionally, move the block that disables periodic interface rescans to
a place where it actually have access to the configuration values.
Previously, the values were being checked before the configuration was
loaded.
Some external log file rotation programs use signals to tell programs
to close log files. SIGHUP can be used to do this but it also does
a full reconfiguration. Configure named to accept SIGUSR1 as a
signal to close log files.
View matching on an incoming query checks the query's signature,
which can be a CPU-heavy task for a SIG(0)-signed message. Implement
an asynchronous mode of the view matching function which uses the
offloaded signature checking facilities, and use it for the incoming
queries.
This is a tiny helper function which is used only once and can be
replaced with two function calls instead. Removing this makes
supporting asynchronous signature checking less complicated.
In order to protect from a malicious DNS client that sends many
queries with a SIG(0)-signed message, add a quota of simultaneously
running SIG(0) checks.
This protection can only help when named is using more than one worker
threads. For example, if named is running with the '-n 4' option, and
'sig0checks-quota 2;' is used, then named will make sure to not use
more than 2 workers for the SIG(0) signature checks in parallel, thus
leaving the other workers to serve the remaining clients which do not
use SIG(0)-signed messages.
That limitation is going to change when SIG(0) signature checks are
offloaded to "slow" threads in a future commit.
The 'sig0checks-quota-exempt' ACL option can be used to exempt certain
clients from the quota requirements using their IP or network addresses.
The 'sig0checks-quota-maxwait-ms' option is used to define a maximum
amount of time for named to wait for a quota to appear. If during that
time no new quota becomes available, named will answer to the client
with DNS_R_REFUSED.
Previously, the number of RR types for a single owner name was limited
only by the maximum number of the types (64k). As the data structure
that holds the RR types for the database node is just a linked list, and
there are places where we just walk through the whole list (again and
again), adding a large number of RR types for a single owner named with
would slow down processing of such name (database node).
Add a configurable limit to cap the number of the RR types for a single
owner. This is enforced at the database (rbtdb, qpzone, qpcache) level
and configured with new max-types-per-name configuration option that
can be configured globally, per-view and per-zone.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
Changed the default value for 'allow-transfer' to 'none'; zone
transfers now require explicit authorization.
Updated all system tests to specify an allow-transfer ACL when needed.
Revised the ARM to specify that the default is 'none'.
The list isn't exactly maintained but it helped with some BIND history
tracking and is basically harmless so it might be worth holding onto it.
I have adapted the name to ASCII so IDN support won't be necessary.
The high-water allows administrators to better tune the recursive
clients limit without having to to poll the statistics channel in high
rates to get this number.
