All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
Change the way arithmetic operations are performed in system test shell
scripts from using `expr` to `$(())`. This ensures that updating the
variable won't end up with a non-zero exit code, which would case the
script to exit prematurely when `set -e` is in effect.
The following replacements were performed using sed in all text files
(git grep -Il '' | xargs sed -i):
s/status=`expr $status + $ret`/status=$((status + ret))/g
s/n=`expr $n + 1`/n=$((n + 1))/g
s/t=`expr $t + 1`/t=$((t + 1))/g
s/status=`expr $status + 1`/status=$((status + 1))/g
s/try=`expr $try + 1`/try=$((try + 1))/g
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
The check which attempts to forward dynamic update to a dead primary may
trigger a timing issue #4080. For some reason, this has manifested under
the pytest runner, while the test still passes with the legacy runner.
Move the dead primary check closer to the end of the test to avoid
hitting this issue before we have a proper fix.
The upforwd test for forwarding updates to a dead primary can continue
running a little bit past its end, causing update replies to be
recorded during a subsequent test case. Correct this by only looking
for update requests and replies for the specific domain name being
tested at any given time.
After the RCU changes were merged, the `upforwd` test started
consistenly failing when run under thread sanitizer. After some
investigation, it turned out that retry attempts were continuing after
the "update forwarding to dead primary" test. This caused mismatches
in the DNSTAP message counts for the subsequent tests, because they
were also counting retries.
Fix this problem by `wait`ing for the `nsupdate` processes to exit.
While investigating the bug, I replaced several fixed 15 second delays
with `wait_for_log`, so the test runs faster.
verify that updates are refused when the client is disallowed by
allow-query, and update forwarding is refused when the client is
is disallowed by update-forwarding.
verify that "too many DNS UPDATEs" appears in the log file when too
many simultaneous updates are processing.
Add a new upforwd system test that checks if update forwarding still
works if the first primary is badly configured.
We cannot reuse the 'example.' zone for this test because that
checks if update forwarding works for DoT. What transport is used
in the new test is of no relevance.
Update the system test to use different known good file names for
the different zones that are being tested.
Add several test cases in the 'upforwd' system test to make sure
that different scenarios of Dynamic DNS update forwarding are
tested, in particular when both the original and forwarded requests
are over Do53, or DoT, or they use different transports.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Replace most "master/slave" terminology in tests with the preferred
"primary/secondary", with the following exceptions:
- When testing the old syntax
- When master is used in master file and master file format terms
- When master is used in hostmaster or postmaster terms
- When master used in legacy domain names (for example in dig.batch)
- When there is no replacement (for example default-masters)
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
With the netmgr in use, named may start answering queries before zones
are loaded. This can cause transient failures in system tests after
servers are restarted or reconfigured. This commit adds retry loops
and sleep statements where needed to address this problem.
Also incidentally silenced a clang warning.
- removed a few remaing places where output wasn't being passed
through echo_i or cat_i
- added a "digcomp" function to conf.sh.in to send digcomp.pl output
through cat_i and return the correct exit value
- set SYSTESTDIR when calling echo_i from nsX directories, so that
the test name will always be printed correctly
- fixed a test name typo in conf.sh.in
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
