Return partial match from dns_db_find/dns_db_find when requested
to short circuit the closest encloser discover process. Most of the
time this will be the actual closest encloser but may not be when
there yet to be committed / cleaned up versions of the zone with
names below the actual closest encloser.
Give prefetches a free pass through the quota so that the cache
entries for popular zones could be updated successfully even if the
quota for is already reached.
This limits the maximum number of received incremental zone
transfer differences for a secondary server. Upon reaching the
confgiured limit, the secondary aborts IXFR and initiates a full
zone transfer (AXFR).
With offline-ksk enabled, we don't run the keymgr because the key
timings are determined by the SKR. We do update the key states but
we derive them from the timing metadata.
Then, we can skip a other tasks in offline-ksk mode, like DS checking
at the parent and CDS synchronization, because the CDS and CDNSKEY
RRsets also come from the SKR.
This added source code stores SKR data. It is loosely based on:
https://www.iana.org/dnssec/archive/files/draft-icann-dnssec-keymgmt-01.txt
A SKR contains a list of signed DNSKEY RRsets. Each change in data
should be stored in a separate bundle. So if the RRSIG is refreshed that
means it is stored in the next bundle. Likewise, if there is a new ZSK
pre-published, it is in the next bundle.
In addition (not mentioned in the draft), each bundle may contain
signed CDS and CDNSKEY RRsets.
Each bundle has an inception time. These will determine when we need
to re-sign or re-key the zone.
Add a new configuration option to enable Offline KSK key management.
Offline KSK cannot work with CSK because it splits how keys with the
KSK and ZSK role operate. Therefore, one key cannot have both roles.
Add a configuration check to ensure this.
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
MAX_RESTARTS is no longer hard-coded; ns_server_setmaxrestarts()
and dns_client_setmaxrestarts() can now be used to modify the
max-restarts value at runtime. in both cases, the default is 11.
Instead of calling dst_lib_init() and dst_lib_destroy() explicitly by
all the programs, create a separate memory context for the DST subsystem
and use the library constructor and destructor to initialize the DST
internals.
The OpenSSL 1.x Engines support has been deprecated in the OpenSSL 3.x
and is going to be removed. Remove the OpenSSL Engine support in favor
of OpenSSL Providers.
When adding glue to the header, we add header to the wait-free stack to
be cleaned up later which sets wfc_node->next to non-NULL value. When
the actual cleaning happens we would only cleanup the .glue_list, but
since the database isn't locked for the time being, the headers could be
reused while cleaning the existing glue entries, which creates a data
race between database versions.
Revert the code back to use per-database-version hashtable where keys
are the node pointers. This allows each database version to have
independent glue cache table that doesn't affect nodes or headers that
could already "belong" to the future database version.
dns_difftuple_create() could only return success, so change
its type to void and clean up all the calls to it.
other functions that only returned a result value because of it
have been cleaned up in the same way.
There isn't a realistic reason to ever use e = 4294967297. Fortunately
its codepath wasn't reachable to users and can be safetly removed.
Keep in mind the `dns_key_generate` header comment was outdated. e = 3
hasn't been used since 2006 so there isn't a reason to panic. The
toggle was the public exponents between 65537 and 4294967297.
Add support for using the offload threadpool to perform message
signature verifications. This should allow check SIG(0)-signed
messages without affecting the worker threads.
This is a tiny helper function which is used only once and can be
replaced with two function calls instead. Removing this makes
supporting asynchronous signature checking less complicated.
Previously, the number of RR types for a single owner name was limited
only by the maximum number of the types (64k). As the data structure
that holds the RR types for the database node is just a linked list, and
there are places where we just walk through the whole list (again and
again), adding a large number of RR types for a single owner named with
would slow down processing of such name (database node).
Add a configurable limit to cap the number of the RR types for a single
owner. This is enforced at the database (rbtdb, qpzone, qpcache) level
and configured with new max-types-per-name configuration option that
can be configured globally, per-view and per-zone.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
Replace the ISC_LIST based deadnodes implementation with isc_queue which
is wait-free and we don't have to acquire neither the tree nor node lock
to append nodes to the queue and the cleaning process can also
copy (splice) the list into a local copy without acquiring the list.
Currently, there's little benefit to this as we need to hold those
locks anyway, but in the future as we move to RCU based implementation,
this will be ready.
To align the cleaning with our event loop based model, remove the
hardcoded count for the node locks and use the number of the event loops
instead. This way, each event loop can have its own cleaning as part of
the process. Use uniform random numbers to spread the nodes evenly
between the buckets (instead of hashing the domain name).
The `axfr_makedb()` didn't set the loop on the newly created database,
effectively killing delayed cleaning on such database. Move the
database creation into dns_zone API that knows all the gory details of
creating new database suitable for the zone.
when calling dns_qp_lookup() from qpcache, instead of passing
'foundname' so that a name would be constructed from the QP key,
we now just use the name field in the node data. this makes
dns_qp_lookup() run faster.
the same optimization has also been added to qpzone.
the documentation for dns_qp_lookup() has been updated to
discuss this performance consideration.
when the cache is over memory, we purge from the LRU list until
we've freed the approximate amount of memory to be added. this
approximation could fail because the memory allocated for nodenames
wasn't being counted.
add a dns_name_size() function so we can look up the size of nodenames,
then add that to the purgesize calculation.
in a cache database, unlike zones, NSEC3 records are stored in
the main tree. it is not necessary to maintain a separate 'nsec3'
tree, nor to have code in the dbiterator implementation to traverse
from one tree to another.
(if we ever implement synth-from-dnssec using NSEC3 records, we'll
need to revert this change. in the meantime, simpler code is better.)
- change dns_qpdata_t to qpcnode_t (QP cache node), and dns_qpdb_t to
qpcache_t, as these types are only accessed locally.
- also change qpdata_t in qpzone.c to qpznode_t (QP zone node), for
consistency.
- make the refcount declarations for qpcnode_t and qpznode_t static,
using the new ISC_REFCOUNT_STATIC macros.
the previous commit introduced a possible race in getsigningtime()
where the rdataset header could change between being found on the
heap and being bound.
getsigningtime() now looks at the first element of the heap, gathers the
locknum, locks the respective lock, and retrieves the header from the
heap again. If the locknum has changed, it will rinse and repeat.
Theoretically, this could spin forever, but practically, it almost never
will as the heap changes on the zone are very rare.
we simplify matters further by changing the dns_db_getsigningtime()
API call. instead of passing back a bound rdataset, we pass back the
information the caller actually needed: the resigning time, owner name
and type of the rdataset that was first on the heap.
