Instead of keeping the whole array of test_node_t objects, just keep the
hashvalues and generated the rest of the test_node_t on the fly. The
test still works this way and the file size has been reduced from 2M to
90k.
Add second iterator test with a well-known configuration of the nodes
array that causes the last element of the array to migrate two times to
the previous node.
isc_loop() can now take its place.
This also requires changes to the test harness - instead of running the
setup and teardown outside of th main loop, we now schedule the setup
and teardown to run on the loop (via isc_loop_setup() and
isc_loop_teardown()) - this is needed because the new the isc_loop()
call has to be run on the active event loop, but previously the
isc_loop_current() (and the variants like isc_loop_main()) would work
even outside of the loop because it needed just isc_tid() to work, but
not the full loop (which was mainly true for the main thread).
if we had a method to get the running loop, similar to how
isc_tid() gets the current thread ID, we can simplify loop
and loopmgr initialization.
remove most uses of isc_loop_current() in favor of isc_loop().
in some places where that was the only reason to pass loopmgr,
remove loopmgr from the function parameters.
The case insensitive matching in isc_ht was basically completely broken
as only the hashvalue computation was case insensitive, but the key
comparison was always case sensitive.
Due to increased number of the NM unit tests and, thus, increased load
on the system timeout recovery tests can sometimes fail, in particular
on FreeBSD. This commit fixes that. Besides, it seems that use of
T_SOFT here was unintentional to begin with.
This commit adds a unit test suite for the new PROXY over UDP
transport. Most of the code is reused from the UDP unit test suite, as
the new transport aims to be fully compatible with UDP on the API
level.
This commit mostly moves the code around to make the parts of the UDP
unit test suite reusable. That changes the unit test suite structure
to resemble that of stream based unit tests.
The motivation behind this is to reuse most of the code for the new
PROXY over UDP uni tests suite.
This commit modifies TLS Stream to make it possible to use over PROXY
Stream. That is required to add PROVYv2 support into TLS-based
transports (DNS over HTTP, DNS over TLS).
This commit adds a specialised test suite for the PROXY Stream
transport by reusing most of the testing code from other unit tests
for other stream-based transports.
The commit adds a fairly comprehensive unit test suite for our new
PROXYv2 handling code. The unit tests suite ensures both the
correctness of the code and ensures that the part responsible for
handling incoming headers is very strict regarding what to accept as
valid.
The new unit isc_mem_overmem unit test sets hi and lo water marks and
then does allocations to go over:
0. x < lo_water
1. lo_water < x < hi_water
2. x > hi_water
3. lo_water < x < hi_water
4. < lo_water
The AES algorithm for DNS cookies was being kept for legacy reasons, and
it can be safely removed in the next major release. Remove both the AES
usage for DNS cookies and the AES implementation itself.
When isc_hashmap_iter_delcurrent_next calls hashmap_delete_node
nodes from the front of the table could be added to the end of
the table resulting in them being returned twice. Detect when
this is happening and prevent those nodes being returned twice
buy reducing the effective size of the table by one each time
it happens.
Refactor isc_hashmap to allow custom matching functions. This allows us
to have better tailored keys that don't require fixed uint8_t arrays,
but can be composed of more fields from the stored data structure.
When inserting items into hashtables (hashmaps), we might have a
fragmented key (as an example we might want to hash DNS name + class +
type). We either need to construct continuous key in the memory and
then hash it en bloc, or incremental hashing is required.
This incremental version of SipHash 2-4 algorithm is the first building
block.
As SipHash 2-4 is often used in the hot paths, I've turned the
implementation into header-only version in the process.
Use the new isc_mem_c*() calloc-like API for allocations that are
zeroed.
In turn, this also fixes couple of incorrect usage of the ISC_MEM_ZERO
for structures that need to be zeroed explicitly.
There are few places where isc_mem_cput() is used on structures with a
flexible member (or similar).
The resolution of the uv_hrtime() function is bigger than the
intervals used in the timers, which can result in an unexpected
difference between the start_time and stop_time variables.
Use isc_loop_now(), which is based on uv_now() and has the same
milliseconds resolution as the functions in the uv_timer_t API.
Also fix a couple wrong numbers in the comments.
Add tracing probes to isc_job unit:
* libisc:job_cb_before - before the job callback is called
* libisc:job_cb_after - after the job callback is called
Add simple rwlock unit test and rwlock benchmark. The benchmark
compares the pthread rwlock with isc rwlock implementation, so it's
mainly useful when developing a new isc rwlock implementation.
The isc_stats_create() can no longer return anything else than
ISC_R_SUCCESS. Refactor isc_stats_create() and its variants in libdns,
libns and named to just return void.
These insertions are added to produce a radix tree that will trigger
the INSIST reported in [GL #4090]. Due to fixes added since BIND 9.9
an extra insert in needed to ensure node->parent is non NULL.
tests/isc/ht_test.c triggers the following compiler warnings when built
against development versions of cmocka:
In file included from ht_test.c:24:
ht_test.c: In function ‘test_ht_full’:
ht_test.c:68:45: warning: passing argument 2 of ‘_assert_ptr_equal’ makes pointer from integer without a cast [-Wint-conversion]
68 | assert_ptr_equal((void *)i, (uintptr_t)f);
/usr/include/cmocka.h:1513:56: note: in definition of macro ‘assert_ptr_equal’
1513 | #define assert_ptr_equal(a, b) _assert_ptr_equal((a), (b), __FILE__, __LINE__)
| ^
/usr/include/cmocka.h:2907:36: note: expected ‘const void *’ but argument is of type ‘long unsigned int’
2907 | const void *b,
| ~~~~~~~~~~~~^
ht_test.c:163:45: warning: passing argument 2 of ‘_assert_ptr_equal’ makes pointer from integer without a cast [-Wint-conversion]
163 | assert_ptr_equal((void *)i, (uintptr_t)f);
/usr/include/cmocka.h:1513:56: note: in definition of macro ‘assert_ptr_equal’
1513 | #define assert_ptr_equal(a, b) _assert_ptr_equal((a), (b), __FILE__, __LINE__)
| ^
/usr/include/cmocka.h:2907:36: note: expected ‘const void *’ but argument is of type ‘long unsigned int’
2907 | const void *b,
| ~~~~~~~~~~~~^
These are caused by a change to the definitions of pointer assert
functions in cmocka's development branch [1]. Fix by casting the
affected variables to (void *) instead of (uintptr_t).
[1] https://git.cryptomilk.org/projects/cmocka.git/commit/?id=09621179af67535788a67957a910d9f17c975b45
Development versions of cmocka require the intmax_t and uintmax_t types
to be defined by the time the test code includes the <cmocka.h> header.
These types are defined in the <stdint.h> header, which is included by
the <inttypes.h> header, which in turn is already explicitly included by
some of the programs in the tests/ directory. Ensure all programs in
that directory that include the <cmocka.h> header also include the
<inttypes.h> header to future-proof the code while keeping the change
set minimal and the resulting code consistent. Also prevent explicitly
including the <stdint.h> header in those programs as it is included by
the <inttypes.h> header.
The teardown jobs are not executed immediately, so we need to delay the
check for ISC_R_SHUTTINGDOWN even more (as the UDP connect is
synchronous, it makes it harder to test it).
