When shutting down, calling the isc__nm_failed_connect_cb() was delayed
until the connect callback would be called. It turned out that the
connect callback might not get called at all when the socket is being
shut down. Call the failed_connect_cb() directly in the
tlsdns_shutdown() instead of waiting for the connect callback to call it.
After a partial write the tls.senddata buffer would be rearranged to
contain only the data tha wasn't sent and the len part would be made
shorter, which would lead to attempt to free only part of a socket's
tls.senddata buffer.
The tlsdns_cycle() might call uv_write() to write data to the socket,
when this happens and the socket is shutdown before the callback
completes, the uvreq structure was not freed because the callback would
be called with non-zero status code.
The RFC7828 specifies the keepalive interval to be 16-bit, specified in
units of 100 milliseconds and the configuration options tcp-*-timeouts
are following the suit. The units of 100 milliseconds are very
unintuitive and while we can't change the configuration and presentation
format, we should not follow this weird unit in the API.
This commit changes the isc_nm_(get|set)timeouts() functions to work
with milliseconds and convert the values to milliseconds before passing
them to the function, not just internally.
The udp, tcpdns and tlsdns contained lot of cut&paste code or code that
was very similar making the stack harder to maintain as any change to
one would have to be copied to the the other protocols.
In this commit, we merge the common parts into the common functions
under isc__nm_<foo> namespace and just keep the little differences based
on the socket type.
After the TCPDNS refactoring the initial and idle timers were broken and
only the tcp-initial-timeout was always applied on the whole TCP
connection.
This broke any TCP connection that took longer than tcp-initial-timeout,
most often this would affect large zone AXFRs.
This commit changes the timeout logic in this way:
* On TCP connection accept the tcp-initial-timeout is applied
and the timer is started
* When we are processing and/or sending any DNS message the timer is
stopped
* When we stop processing all DNS messages, the tcp-idle-timeout
is applied and the timer is started again
Dynamic zones with dnssec-policy could not be thawed because KASP
zones were considered always dynamic. But a dynamic KASP zone should
also check whether updates are disabled.
This commit fixes loading the certificate chain files so that the full
chain could be sent to the clients which require that for
verification. Before that fix only the top most certificate would be
loaded from the chain and sent to clients preventing some of them to
perform certificate validation (e.g. Windows 10 DoH client).
The transport should also be detached when we skip a master, otherwise
named will crash when sending a SOA query to the next master over TLS,
because the transport must be NULL when we enter
'dns_view_gettransport'.
When we query the resolver for a domain name that is in the same zone
for which is already one or more fetches outstanding, we could
potentially hit the fetch limits. If so, recursion fails immediately
for the incoming query and if serve-stale is enabled, we may try to
return a stale answer.
If the resolver is also is authoritative for the parent zone (for
example the root zone), first a delegation is found, but we first
check the cache for a better response.
Nothing is found in the cache, so we try to recurse to find the
answer to the query.
Because of fetch-limits 'dns_resolver_createfetch()' returns an error,
which 'ns_query_recurse()' propagates to the caller,
'query_delegation_recurse()'.
Because serve-stale is enabled, 'query_usestale()' is called,
setting 'qctx->db' to the cache db, but leaving 'qctx->version'
untouched. Now 'query_lookup()' is called to search for stale data
in the cache database with a non-NULL 'qctx->version'
(which is set to a zone db version), and thus we hit an assertion
in rbtdb.
This crash was introduced in 'main' by commit
8bcd7fe69e.
- use a value less than 2^32 for DNS_ZONEFLG_FIXJOURNAL; a larger value
could cause problems in some build environments. the zone flag
DNS_ZONEFLG_DIFFONRELOAD, which was no longer in use, has now been
deleted and its value reused for _FIXJOURNAL.
*** CID 329157: Null pointer dereferences (REVERSE_INULL)
/lib/dns/journal.c: 754 in journal_open()
748 j->header.index_size * sizeof(journal_rawpos_t));
749 }
750 if (j->index != NULL) {
751 isc_mem_put(j->mctx, j->index,
752 j->header.index_size * sizeof(journal_pos_t));
753 }
CID 329157: Null pointer dereferences (REVERSE_INULL)
Null-checking "j->filename" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
754 if (j->filename != NULL) {
755 isc_mem_free(j->mctx, j->filename);
756 }
757 if (j->fp != NULL) {
758 (void)isc_stdio_close(j->fp);
759 }
It is advisable to disable Nagle's algorithm for HTTP/2 connections
because multiple HTTP/2 streams could be multiplexed over one
transport connection. Thus, delays when delivering small packets could
bring down performance for the whole session. HTTP/2 is meant to be
used this way.
when called from within the context of a network thread,
isc_nm_tlsconnect() hangs. it is waiting for the socket's
result code to be updated, but that update is supposed to happen
asynchronously in the network thread, and if we're already blocking
in the network thread, it can never occur.
we can kluge around this by setting the socket result code
early; this works for most clients (including "dig"), but it causes
inconsistent behaviors that manifest as test failures in the DoH unit
test.
so we kluged around it even more by setting the socket result code
early *only when running in the network thread*. we need a better
solution for this problem, but this will do for now.
This commit makes the server-side code polite.
It fixes the error handling code on the server side and fixes
returning error code in responses (there was a nasty bug which could
potentially crash the server).
Also, in this commit we limit max size POST request data to 96K, max
processed data size in headers to 128K (should be enough to handle any
GET requests).
If these limits are surpassed, server will terminate the request with
RST_STREAM without responding with error code. Otherwise it politely
responds with error code.
This commit also limits number of concurrent HTTP/2 streams per
transport connection on server to 100 (as nghttp2 advises by default).
Ideally, these parameters should be configurable both globally and per
every HTTP endpoint description in the configuration file, but for now
putting sane limits should be enough.
- style, cleanup, and removal of unnecessary code.
- combined isc_nm_http_add_endpoint() and isc_nm_http_add_doh_endpoint()
into one function, renamed isc_http_endpoint().
- moved isc_nm_http_connect_send_request() into doh_test.c as a helper
function; remove it from the public API.
- renamed isc_http2 and isc_nm_http2 types and functions to just isc_http
and isc_nm_http, for consistency with other existing names.
- shortened a number of long names.
- the caller is now responsible for determining the peer address.
in isc_nm_httpconnect(); this eliminates the need to parse the URI
and the dependency on an external resolver.
- the caller is also now responsible for creating the SSL client context,
for consistency with isc_nm_tlsdnsconnect().
- added setter functions for HTTP/2 ALPN. instead of setting up ALPN in
isc_tlsctx_createclient(), we now have a function
isc_tlsctx_enable_http2client_alpn() that can be run from
isc_nm_httpconnect().
- refactored isc_nm_httprequest() into separate read and send functions.
isc_nm_send() or isc_nm_read() is called on an http socket, it will
be stored until a corresponding isc_nm_read() or _send() arrives; when
we have both halves of the pair the HTTP request will be initiated.
- isc_nm_httprequest() is renamed isc__nm_http_request() for use as an
internal helper function by the DoH unit test. (eventually doh_test
should be rewritten to use read and send, and this function should
be removed.)
- added implementations of isc__nm_tls_settimeout() and
isc__nm_http_settimeout().
- increased NGHTTP2 header block length for client connections to 128K.
- use isc_mem_t for internal memory allocations inside nghttp2, to
help track memory leaks.
- send "Cache-Control" header in requests and responses. (note:
currently we try to bypass HTTP caching proxies, but ideally we should
interact with them: https://tools.ietf.org/html/rfc8484#section-5.1)
Simple typecast to size_t should be enough to silence the warning on
ARMv7, even though the code is in fact correct, because the readlen is
checked for being < 0 in the block before the warning.
'named-journalprint -x' now prints the journal's index table and
the offset of each transaction in the journal, so that index consistency
can be confirmed.
when the 'max-ixfr-ratio' option was added, journal transaction
headers were revised to include a count of RR's in each transaction.
this made it impossible to read old journal files after an upgrade.
this branch restores the ability to read version 1 transaction
headers. when rolling forward, printing journal contents, if
the wrong transaction header format is found, we can switch.
when dns_journal_rollforward() detects a version 1 transaction
header, it returns DNS_R_RECOVERABLE. this triggers zone_postload()
to force a rewrite of the journal file in the new format, and
also to schedule a dump of the zone database with minimal delay.
journal repair is done by dns_journal_compact(), which rewrites
the entire journal, ignoring 'max-journal-size'. journal size is
corrected later.
newly created journal files now have "BIND LOG V9.2" in their headers
instead of "BIND LOG V9". files with the new version string cannot be
read using the old transaction header format. note that this means
newly created journal files will be rejected by older versions of named.
named-journalprint now takes a "-x" option, causing it to print
transaction header information before each delta, including its
format version.
Call the libisc isc__initialize() constructor and isc__shutdown()
destructor from DllMain instead of having duplicate code between
those and DllMain() code.
When AddressSanitizer is in use, disable the internal mempool
implementation and redirect the isc_mempool_get to isc_mem_get
(and similarly for isc_mempool_put). This is the method recommended
by the AddressSanitizer authors for tracking allocations and
deallocations instead of custom poison/unpoison code (see
https://github.com/google/sanitizers/wiki/AddressSanitizerManualPoisoning).
The pthread_self(), thrd_current() or GetCurrentThreadId() could
actually be a pointer, so we should rather convert the value into
uintptr_t instead of unsigned long.
Convert the isc_hp API to use the globally available isc_tid_v instead
of locally defined tid_v. This should solve most of the problems on
machines with many number of cores / CPUs.
The current isc_hp API uses internal tid_v variable that gets
incremented for each new thread using hazard pointers. This tid_v
variable is then used as a index to global shared table with hazard
pointers state. Since the tid_v is only incremented and never
decremented the table could overflow very quickly if we create set of
threads for short period of time, they finish the work and cease to
exist. Then we create identical set of threads and so on and so on.
This is not a problem for a normal `named` operation as the set of
threads is stable, but the problematic place are the unit tests where we
test network manager or other APIs (task, timer) that create threads.
This commits adds a thin wrapper around any function called from
isc_thread_create() that adds unique-but-reusable small digit thread id
that can be used as index to f.e. hazard pointer tables. The trampoline
wrapper ensures that the thread ids will be reused, so the highest
thread_id number doesn't grow indefinitely when threads are created and
destroyed and then created again. This fixes the hazard pointer table
overflow on machines with many cores. [GL #2396]
When a staleonly lookup doesn't find a satisfying answer, it should
not try to respond to the client.
This is not true when the initial lookup is staleonly (that is when
'stale-answer-client-timeout' is set to 0), because no resolver fetch
has been created at this point. In this case continue with the lookup
normally.
Fix a crash that can happen in the following scenario:
A client request is received. There is no data for it in the cache,
(not even stale data). A resolver fetch is created as part of
recursion.
Some time later, the fetch still hasn't completed, and
stale-answer-client-timeout is triggered. A staleonly lookup is
started. It will also find no data in the cache.
So 'query_lookup()' will call 'query_gotanswer()' with ISC_R_NOTFOUND,
so this will call 'query_notfound()' and this will start recursion.
We will eventually end up in 'ns_query_recurse()' and that requires
the client query fetch to be NULL:
REQUIRE(client->query.fetch == NULL);
If the previously started fetch is still running this assertion
fails.
The crash is easily prevented by not requiring recursion for
staleonly lookups.
Also remove a redundant setting of the staleonly flag at the end of
'query_lookup_staleonly()' before destroying the query context.
Add a system test to catch this case.
When applying dnssec-policy on a dynamic zone (e.g. that allows Dynamic
Updates), the NSEC3 parameters were put on the queue, but they were
not being processed (until a reload of the zone or reconfiguration).
Process the NSEC3PARAM queue on zone postload when handling a
dynamic zone.
The BIND 9 libraries on Windows define DllMain() optional entry point
into a dynamic-link library (DLL). When the system starts or terminates
a process or thread, it calls the entry-point function for each loaded
DLL using the first thread of the process.
When the DLL is being loaded into the virtual address space of the
current process as a result of the process starting up, we make a call
to DisableThreadLibraryCalls() which should disable the
DLL_THREAD_ATTACH and DLL_THREAD_DETACH notifications for the specified
dynamic-link library (DLL).
This seems not be the case because we never check the return value of
the DisableThreadLibraryCalls() call, and it could in fact fail. The
DisableThreadLibraryCalls() function fails if the DLL specified by
hModule has active static thread local storage, or if hModule is an
invalid module handle.
In this commit, we remove the safe-guard assertion put in place for the
DLL_THREAD_ATTACH and DLL_THREAD_DETACH events and we just ignore them.
BIND 9 doesn't create/destroy enough threads for it actually to make any
difference, and in fact we do use static thread local storage in the
code.
The 'checknames' field wasn't initialized in dns_view_create(), but it
should otherwise AddressSanitizer identifies the following runtime error
in query_test.c.
runtime error: load of value 190, which is not a valid value for type '_Bool'
'checknames' field of struct dns_view is not initialized by
dns_view_create(). ASAN identified this as runtime error:
runtime error: load of value 190, which is not a valid value for type '_Bool'
On each keymgr run, we now also check if key files can be removed.
The 'purge-keys' interval determines how long keys should be retained
after they have become completely hidden.
Key files should not be removed if it has a state that is set to
something else then HIDDEN, if purge-keys is 0 (disabled), if
the key goal is set to OMNIPRESENT, or if the key is unused (a key is
unused if no timing metadata set, and no states are set or if set,
they are set to HIDDEN).
If the last changed timing metadata plus the purge-keys interval is
in the past, the key files may be removed.
Add a dst_key_t variable 'purge' to signal that the key file should
not be written to file again.
Add a new option 'purge-keys' to 'dnssec-policy' that will purge key
files for deleted keys. The option determines how long key files
should be retained prior to removing the corresponding files from
disk.
If set to 0, the option is disabled and 'named' will not remove key
files from disk.
dns_dt_open() is not currently called with mode dns_dtmode_unix.
*** CID 281489: Resource leaks (RESOURCE_LEAK)
/lib/dns/dnstap.c: 983 in dns_dt_open()
977
978 if (!dnstap_file(handle->reader)) {
979 CHECK(DNS_R_BADDNSTAP);
980 }
981 break;
982 case dns_dtmode_unix:
CID 281489: Resource leaks (RESOURCE_LEAK)
Variable "handle" going out of scope leaks the storage it points to.
983 return (ISC_R_NOTIMPLEMENTED);
984 default:
985 INSIST(0);
986 ISC_UNREACHABLE();
987 }
988
The addition of lib/isc/tls_p.h to the source tree was not accounted for
in the relevant variable in lib/isc/Makefile.am and thus the former file
is not being included in release tarballs prepared using "make dist".
Fix by tweaking the libisc_la_SOURCES list in lib/isc/Makefile.am
accordingly.
Instead of calling isc_tls_initialize()/isc_tls_destroy() explicitly use
gcc/clang attributes on POSIX and DLLMain on Windows to initialize and
shutdown OpenSSL library.
This resolves the issue when isc_nm_create() / isc_nm_destroy() was
called multiple times and it would call OpenSSL library destructors from
isc_nm_destroy().
At the same time, since we now have introduced the ctor/dtor for libisc,
this commit moves the isc_mem API initialization (the list of the
contexts) and changes the isc_mem_checkdestroyed() to schedule the
checking of memory context on library unload instead of executing the
code immediately.
Disables the DLL_THREAD_ATTACH and DLL_THREAD_DETACH notifications for
the specified dynamic-link library (DLL). This can reduce the size of
the working set for some applications.
