When looking up a zonecut in cache, we use 'dns_rbt_findnode' to find
the closest matching node. This function however does not take into
account stale nodes. When we do find a stale node and use it, this
has implications for subsequent lookups. For example, this may break
QNAME minimization because we are using a deeper zonecut than we should
have.
Check the header for staleness and if so, and stale entries are not
accepted, look for the deepest zonecut from this node up.
There are some occurrences where we check if a header exists in the
rbtdb. These cases require that the header is also not marked as
ancient (aka ready for cleanup). These cases involve finding certain
data in cache.
The commit fixes the doh_recv_send() because occasionally it would
fail because it did not wait for all responses to be sent, making the
check for ssends value to nit pass.
This commit changes TLS stream behaviour in such a way, that it is now
optimised for small writes. In the case there is a need to write less
or equal to 512 bytes, we could avoid calling the memory allocator at
the expense of possibly slight increase in memory usage. In case of
larger writes, the behviour remains unchanged.
At least at this point doing memory copying is not required. Probably
it was a workaround for some problem in the earlier days of DoH, at
this point it appears to be a waste of CPU cycles.
This commit significantly simplifies the code in http_send_outgoing()
as it was unnecessary complicated, because it was dealing with
multiple statically and dynamically allocated buffers, making it
extremely hard to follow, as well as making it to do unnecessary
memory copying in some situations. This commit fixes these issues,
while retaining the high level buffering logic.
When an HTTP/2 client terminates a session it means that it is about
to close the underlying connection. However, we were not doing that.
As a result, with the latest changes to the test suite, which made it
to limit amount of requests per a transport connection, the tests
using quota would hang for quite a while. This commit fixes that.
This commit ensures that only a limited number of requests is going to
be sent over a single HTTP/2 connection. Before that change was
introduced, it was possible to complete all of the planned sends via
only one transport connection, which undermines the purpose of the
tests using the quota facility.
The function should not be called here because it is, in general,
supposed to be called at the end of the transport level callbacks to
perform I/O, and thus, calling it here is clearly a mistake because it
breaks other code expectations. As a result of the call to
http_do_bio() from within isc__nm_http_request() the unit tests were
running slower than expected in some situations.
In this particular situation http_do_bio() is going to be called at
the end of the transport_connect_cb() (initially), or http_readcb(),
sending all of the scheduled requests at once.
This change affects only the test suite because it is the only place
in the codebase where isc__nm_http_request() is used in order to
ensure that the server is able to handle multiple HTTP/2 streams at
once.
This commit fixes a crash in DoH caused by transport handle to be
detached too early when sending outgoing data.
We need to attach to the session->handle earlier because as an
indirect result of the nghttp2_session_mem_send() the session might
get closed and the handle detached. However, there is still might be
some outgoing data to handle. Besides, even when the underlying socket
was closed via the handle, we still should try to attempt to send
outgoing data via isc_nm_send() to let it call write callback, passed
to the http_send_outgoing().
This commit gets rid of custom code taking care of response buffering
by replacing the custom code with isc_buffer_t. Also, it gets rid of
an unnecessary memory copying when sending a response.
This commit replaces the ad-hoc 64K buffer for incoming POST data with
isc_buffer_t backed by dynamically allocated buffer sized accordingly
to the value in the "Content-Length" header.
The commit replaces an ad-hoc incoming DNS-message buffer in the
client-side DoH code with isc_buffer_t.
The commit also fixes a timing issue in the unit tests revealed by the
change.
This commit replaces a static ad-hoc HTTP/2 session's temporary buffer
with a realloc-able isc_buffer_t object, which is being allocated on
as needed basis, lowering the memory consumption somewhat. The buffer
is needed in very rare cases, so allocating it prematurely is not
wise.
Also, it fixes a bug in http_readcb() where the ad-hoc buffer appeared
to be improperly used, leading to a situation when the processed data
from the receiving regions can be processed twice, while unprocessed
data will never be processed.
When copying metadata from one dst_key to another, when the source
dst_key has a boolean metadata unset, the destination dst_key will
have a numeric metadata unset instead.
This means that if a key has KSK or ZSK unset, we may be clearing the
Predecessor or Successor metadata in the destination dst_key.
This commit gets rid of RW locks in a hot path of the DoH code. In the
original design, it was implied that we add new endpoints after the
HTTP listener was created. Such a design implies some locking. We do
not need such flexibility, though. Instead, we could build a set of
endpoints before the HTTP listener gets created. Such a design does
not need RW locks at all.
On the isc_mem water change the old water_t structure could be used
after free. Instead of introducing reference counting on the hot-path
we are going to introduce additional constraints on the
isc_mem_setwater. Once it's set for the first time, the additional
calls have to be made with the same water and water_arg arguments.
Increasing the nodelock count had major impact on the memory footprint
in scenarios where multiple rbtdb structure would be created like
hosting many zones in a single server.
This reverts commit 0344684385 and sets
the nodelock count to previously used values.
This commit makes number of concurrent HTTP/2 streams per connection
configurable as a mean to fight DDoS attacks. As soon as the limit is
reached, BIND terminates the whole session.
The commit adds a global configuration
option (http-streams-per-connection) which can be overridden in an
http <name> {...} statement like follows:
http local-http-server {
...
streams-per-connection 100;
...
};
For now the default value is 100, which should be enough (e.g. NGINX
uses 128, but it is a full-featured WEB-server). When using lower
numbers (e.g. ~70), it is possible to hit the limit with
e.g. flamethrower.
This commit adds support for http-listener-clients global options as
well as ability to override the default in an HTTP server description,
like:
http local-http-server {
...
listener-clients 100;
...
};
This way we have ability to specify per-listener active connections
quota globally and then override it when required. This is exactly
what AT&T requested us: they wanted a functionality to specify quota
globally and then override it for specific IPs. This change
functionality makes such a configuration possible.
It makes sense: for example, one could have different quotas for
internal and external clients. Or, for example, one could use BIND's
internal ability to serve encrypted DoH with some sane quota value for
internal clients, while having un-encrypted DoH listener without quota
to put BIND behind a load balancer doing TLS offloading for external
clients.
Moreover, the code no more shares the quota with TCP, which makes
little sense anyway (see tcp-clients option), because of the nature of
interaction of DoH clients: they tend to keep idle opened connections
for longer periods of time, preventing the TCP and TLS client from
being served. Thus, the need to have a separate, generally larger,
quota for them.
Also, the change makes any option within "http <name> { ... };"
statement optional, making it easier to override only required default
options.
By default, the DoH connections are limited to 300 per listener. I
hope that it is a good initial guesstimate.
This commit adds the code (and some tests) which allows verifying
validity of HTTP paths both in incoming HTTP requests and in BIND's
configuration file.
It has been noticed that commit 7a87bf468b
did not only fix NSEC record handling in signed, insecure delegations
prepared using both wildcard expansion and CNAME chaining - it also
inadvertently fixed DS record handling in signed, secure delegations
of that flavor. This is because the 'rdataset' variable in the relevant
location in query_addds() can be either a DS RRset or an NSEC RRset.
Update a code comment in query_addds() to avoid confusion.
Update the comments describing the purpose of query_addds() so that they
also mention NSEC(3) records.
If we have a CDS or CDNSKEY we at least need to have a DNSKEY with the
same algorithm published and signing the CDS RRset. Same for CDNSKEY
of course.
This relaxes the zone_cdscheck function, because before the CDS or
CDNSKEY had to match a DNSKEY, now only the algorithm has to match.
This allows a provider in a multisigner model to update the CDS/CDNSKEY
RRset in the zone that is served by the other provider.
An unhandled code path left GET query string data uninitialised (equal
to NULL) and led to a crash during the requests' base64 data
decoding. This commit fixes that.
It was discovered that setting the thread affinity on both the netmgr
and netthread threads lead to inconsistent recursive performance because
sometimes the netmgr and netthread threads would compete over single
resource and sometimes not.
Removing setting the affinity causes a slight dip in the authoritative
performance around 5% (the measured range was from 3.8% to 7.8%), but
the recursive performance is now consistently good.
On OpenBSD and more generally on platforms without either jemalloc or
malloc_(usable_)size, we need to increase the alignment for the memory
to sizeof(max_align_t) as with plain sizeof(void *), the compiled code
would be crashing when accessing the returned memory.
It was discovered that on some platforms (f.e. Alpine Linux with MUSL)
the result of isc_os_ncpus() call differ when called before and after we
drop privileges. This commit changes the isc_os_ncpus() call to cache
the result from the first call and thus always return the same value
during the runtime of the named. The first call to isc_os_ncpus() is
made as soon as possible on the library initalization.
The isc_mem_get(), isc_mem_allocate() and isc_mem_reallocate() can
return NULL ptr in case where the allocation size is NULL. Remove the
nonnull attribute from the functions' declarations.
This stems from the following definition in the C11 standard:
> If the size of the space requested is zero, the behavior is
> implementation-defined: either a null pointer is returned, or the
> behavior is as if the size were some nonzero value, except that the
> returned pointer shall not be used to access an object.
In this case, we return NULL as it's easier to detect errors when
accessing pointer from zero-sized allocation which should obviously
never happen.
In the rallocx() shim for OpenBSD (that's the only platform that doesn't
have malloc_size() or malloc_usable_size() equivalent), the newly
allocated size was missing the extra size_t member for storing the
allocation size leading to size_t sized overflow at the end of the
reallocated memory chunk.
