There are many system tests where we set `dnssec-validation yes;` only
to also set `trust-anchors { };` which effectively disables the
validation.
This commit replaces this convoluted setup with just
`dnssec-validation no;`.
The -n (nametype) option for keys defaults to ZONE for DNSKEY
type keys, and HOST for KEY type keys. There is currently no
practical reason to use any other name type; we can simplify
things by removing the option.
Explicitly use an empty 'trust-anchors' statement in the system
tests where it was used implicitly before.
In resolver/ns5/named.conf.in use the trust anchor in 'trusted.conf',
which was supposed to be used there.
Some tests don't have a mock root server configured, because they don't
need one. However, these tests might still leak queries to actual name
servers. Add a shared root hints file which can serve as a blackhole for
these queries.
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Checks that malformed _dns SVCB records are rejected unless
check-svcb is set to no, in which case they are accepted. Both
missing ALPN and missing DOHPATH are checked for.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Add tests to the nsupdate system test to make sure that CDS and/or
CDNSKEY that match an algorithm in the DNSKEY RRset are allowed. Also
add tests that updates are rejected if the algorithm does not match.
Remove the now redundant test cases from the dnssec system test.
Update the checkzone system test: Change the algorithm of the CDS and
CDNSKEY records so that the zone is still rejected.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
4594. [func] dnssec-keygen no longer uses RSASHA1 by default;
the signing algorithm must be specified on
the command line with the "-a" option. Signing
scripts that rely on the existing default behavior
will break; use "dnssec-keygen -a RSASHA1" to
repair them. (The goal of this change is to make
it easier to find scripts using RSASHA1 so they
can be changed in the event of that algorithm
being deprecated in the future.) [RT #44755]
3535. [func] Add support for setting Differentiated Services Code
Point (DSCP) values in named. Most configuration
options which take a "port" option (e.g.,
listen-on, forwarders, also-notify, masters,
notify-source, etc) can now also take a "dscp"
option specifying a code point for use with
outgoing traffic, if supported by the underlying
OS. [RT #27596]
