Rather than using the dnspython's facilities and defaults to create the
queries, use the isctest.query.create function in all the cases that
don't require special handling to have consistent defaults.
Rndc test "test 'rndc reconfig' with a broken config" was failing
intermittently.
Wait for 'running' to be logged rather than just using 'sleep 1' before
calling 'rndc reconfig' a second time to get the expected error message
rather than 'reconfig request ignored: already running'.
There are many system tests where we set `dnssec-validation yes;` only
to also set `trust-anchors { };` which effectively disables the
validation.
This commit replaces this convoluted setup with just
`dnssec-validation no;`.
Enable existing rndc system tests (the python test function calling the
shell file was missing). Also update the extra artifacts list to remove
one generated file which was left behind.
Check that with a preexisting dump file without a write permission
no actual dump happens, and rndc returns an error result.
Also add a couple of missing entries in the cleaning script.
Explicitly use an empty 'trust-anchors' statement in the system
tests where it was used implicitly before.
In resolver/ns5/named.conf.in use the trust anchor in 'trusted.conf',
which was supposed to be used there.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
'rndc thaw' initiates asynchrous loading of all the zones
similar to 'rndc load'. Wait for the test zone's load to
complete before testing that it is updatable again.
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
Include MD5 feature detection in featuretest tool and use it in some
places. When RHEL distribution or Fedora ELN is in FIPS mode, then MD5
algorithm is unavailable completely and even hmac-md5 algorithm usage
will always fail. Work that around by checking MD5 works and if not,
skipping its usage.
Those changes were dragged as downstream patch bind-9.11-fips-tests.patch
in Fedora and RHEL.
previously, a managed-keys zone was created for every view
regardless of whether rfc5011 was in use; when it was not in
use, the zone would be left empty. this made for some confusing
log messages.
we now only set up the managed-keys zone if dnssec-validation is
set to the default value of "auto".
certain system test servers have had their dnssec-validation settings
changed to auto because the tests depended on the existence of the
zone.
The dig commands appear to be failing unexpectedly on some platforms
when rate limiting kicks in and the response is dropped. Correct
behaviour should be for dig to retry the query. Set +qr and capture
stdout and stderr of each of the dig commands involved.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Add a test case for GL #2845 where a zone is in two views, one base
view and one "in-view" and that zone is using an $INCLUDE. Make sure
that there is a jnl file (have ixfr-from-differences enabled and do a
dynamic update). Then freeze and make updates in the included file
(this requires the test.db file also to be updated because 'rndc freeze'
causes the zone file to be overwritten). Finally reload and ensure that
the edit in the included file has been loaded.
if a control channel listener was configured with more than one
key algorithm, message verification would be attempted with each
algorithm in turn. if the first key failed due to the wrong
signature length, the entire verification process was aborted,
rather than continuing on to try with another key.
the idle timeout for rndc connections was set to 10 seconds, but this
caused intermittent system failures of the 'rndc' system test on slow
platforms, since 'rndc reconfig' could time out before reconfiguration
was complete.
this commit restores the original timeout value of 60 seconds, which was
changed inadvertently after rndc was updated to use the network manager.
even with this change, however, the test can still time out under
TSAN because loading the huge zone can take a very long time (upwards
of two minutes). so the test is modified here to generate a smaller zone
file when running under TSAN.
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
control channel connection objects now contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- cmdhandle: held while an rndc command is running
httpd connections contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
The "huge.zone" zone can take longer than 100 seconds to load when
running under a sanitizer. Increase the relevant zone load timeout to
prevent intermittent failures of the "rndc" system test.
In order to lower the amount of memory allocated at startup by named
instances used in the BIND system test suite, set the default value of
"max-cache-size" for these to 2 megabytes. The purpose of this change
is to prevent named instances (or even entire virtual machines) from
getting killed by the operating system on the test host due to excessive
memory use.
Remove all "max-cache-size" statements from named configuration files
used in system tests ("checkconf" notwithstanding) to prevent confusion
as the "-T maxcachesize=..." command line option takes precedence over
configuration files.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
