When request manager shuts down, it also shuts down all its ongoing
requests. Currently it calls their callback functions with a
ISC_R_SHUTTINGDOWN result code for the request. Since a request
manager can shutdown not only during named shutdown but also during
named reconfiguration, instead of sending ISC_R_SHUTTINGDOWN result
code send a ISC_R_CANCELED code to avoid confusion and errors with
the expectation that a ISC_R_SHUTTINGDOWN result code can only be
received during actual shutdown of named.
All the callback functions which are passed to either the
dns_request_create() or the dns_request_createraw() functions have
been analyzed to confirm that they can process both the
ISC_R_SHUTTINGDOWN and ISC_R_CANCELED result codes. Changes were
made where it was necessary.
This new test checks that named can correctly process an interrupted
SOA request during zone transfer, caused by reconfiguration.
Co-authored-by: Michał Kępień <michal@isc.org>
Add a new big zone, run a zone transfer in slow mode, and check
whether the zone transfer gets canceled because 100000 bytes are
not transferred in 5 seconds (as it's running in slow mode).
Add test cases which check that when a XoT primary server is
unreachable or is already marked as unreachble then the next
primary server in the list is used.
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
This commit adds support for timestamps in iso8601 format with timezone
when logging. This is exposed through the iso8601-tzinfo printtime
suboption.
It also makes the new logging format the default for -g output,
hopefully removing the need for custom timestamp parsing in scripts.
Remove the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Remove the use of source ports for parental-agents.
Also remove the deprecated options use-{v4,v6}-udp-ports and
avoid-{v4,v6}udp-ports.
Configure a maximum of 3 allowed differences and add 5 new records.
Check that named detected that the differences exceed the allowed
limit and successfully retries with AXFR.
Use a big zone and the slow transfer mode. Initiate a retransfer, wait
several seconds, then initiate a retransfer using a '-force' argument,
which should cancel the previous transfer and start a new one.
Changed the default value for 'allow-transfer' to 'none'; zone
transfers now require explicit authorization.
Updated all system tests to specify an allow-transfer ACL when needed.
Revised the ARM to specify that the default is 'none'.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
We test EDNS requests returning FORMERR where named is expected
to retry without EDNS.
We test EDNS requests returning NOTIMP where named is expected
to fail the transfer as the remote end is not protocol compliant.
The server is expected to retry the transfer using SOA and if
the returned serial is greater than the current serial AXFR.
Check the log that IXFR is request.
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
This allow for the EDNS options EXPIRE and NSID to be sent when
when making requests. The existing controls controlling whether
EDNS is used and whether EXPIRE or NSID are sent are honoured.
Adjust the expected byte counts in the xfer system test to reflect
the EDNS overhead. Adjust the dig call to match named's behavior
(don't set +expire as we are talking to a secondary).
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
There is no 'ret' in this test, and it is obvious that 'ret=1'
should be 'tmp=1' for the check to work correctly, if the string
is not found in the log file.
the dns_xfrin module was still using the network manager directly to
manage TCP connections and send and receive messages. this commit
changes it to use the dispatch manager instead.
check in the log files of receiving servers that the originating
ports for notify and SOA query messages were set correctly from
configured notify-source and transfer-source options.
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
Add a test case that if the first primary fails, the fallback of a
second primary on plain DNS works. This is mainly to test that the port
configuration inheritance works correctly.
- Removed all code that only runs under CYGWIN, and made all
code that doesn't run under CYGWIN non-optional.
- Removed the $TP variable which was used to add optional
trailing dots to filenames; they're no longer optional.
- Removed references to pssuspend and dos2unix.
- No need to use environment variables for diff and kill.
- Removed uses of "tr -d '\r'"; this was a workaround for
a cygwin regex bug that is no longer needed.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
With the netmgr in use, named may start answering queries before zones
are loaded. This can cause transient failures in system tests after
servers are restarted or reconfigured. This commit adds retry loops
and sleep statements where needed to address this problem.
Also incidentally silenced a clang warning.
Since the message confirming outgoing transfer completion is logged
asynchronously, it may happen that transfer statistics may not yet be
logged by the time the dig command triggering a given transfer returns.
This causes false positives for the "ixfr" and "xfer" system tests.
Prevent this from happening by checking outgoing transfer statistics up
to 10 times, in 1-second intervals.
Ensure AXFR statistics are calculated correctly by dig and named, both
for incoming and outgoing transfers. Rather than employing a zone which
is already used in the "xfer" system test, create a new one whose AXFR
form spans multiple TCP messages. Disable EDNS when using dig to
request an AXFR so that the same reference file can be used for testing
statistics calculated by both dig and named (dig uses EDNS by default
when sending transfer requests, which affects the number of bytes
transferred).
