Using the 'dnssec-validation yes' option now requires an explicitly
confgiured 'trust-anchors' statement (or 'managed-keys' or
'trusted-keys', both deprecated).
"A parental agent is the entity that is allowed to change a zone's
delegation information" is untrue, because it is possible to use some
hidden server or a validating resolver.
Also the new text makes it more clear that named sends DS queries to
these servers.
Instead of running all the cryptographic validation in a tight loop,
spread it out into multiple event loop "ticks", but moving every single
validation into own isc_async_run() asynchronous event. Move the
cryptographic operations - both verification and DNSKEY selection - to
the offloaded threads (isc_work_enqueue), this further limits the time
we spend doing expensive operations on the event loops that should be
fast.
Limit the impact of invalid or malicious RRSets that contain crafted
records causing the dns_validator to do many validations per single
fetch by adding a cap on the maximum number of validations and maximum
number of validation failures that can happen before the resolving
fails.
Support for FreeBSD 12.4, the last FreeBSD 12.x release, ended on
December 31, 2023.
Link: https://www.freebsd.org/security/unsupported/
Move the --with-readline=editline ./configure option to FreeBSD 14.
Update the minimum required version of pkcs11-provider that contains the
fixes needed in order to make it work with dnssec-policy.
Update documentation to not recommend using engine_pkcs11 in conjunction
with dnssec-policy.
The name "uri" was considered to be too generic and could potentially
clash with a future URI configuration option. Renamed to "pkcs11-uri".
Note that this option name was also preferred over "pkcs11uri", the
dash is considered to be the more clearer form.
Add new configuration for setting key stores. The new 'key-store'
statement allows users to configure key store backends. These can be
of type 'file' (that works the same as 'key-directory') or of type
'pkcs11'. In the latter case, keys should be stored in a HSM that is
accessible through a PKCS#11 interface.
Keys configured within 'dnssec-policy' can now also use the 'key-store'
option to set a specific key store.
Update the checkconf test to accomodate for the new configuration.
Remove the CFG_CLAUSEFLAG_EXPERIMENTAL flag from the
"trust-anchor-telemetry" statement as the behavior of the latter has not
been changed since its initial implementation and there are currently no
plans to do so. This silences a relevant log message that was emitted
even when the feature was explicitly disabled.
these options control default timing of retries in the resolver
for experimental purposes; they are not known to useful in production
environments. they will be removed in the future; for now, we
only log a warning if they are used.
The main intention of PROXY protocol is to pass endpoints information
to a back-end server (in our case - BIND). That means that it is a
valid way to spoof endpoints information, as the addresses and ports
extracted from PROXYv2 headers, from the point of view of BIND, are
used instead of the real connection addresses.
Of course, an ability to easily spoof endpoints information can be
considered a security issue when used uncontrollably. To resolve that,
we introduce 'allow-proxy' and 'allow-proxy-on' ACL options. These are
the only ACL options in BIND that work with real PROXY connections
addresses, allowing a DNS server operator to specify from what clients
and on which interfaces he or she is willing to accept PROXY
headers. By default, for security reasons we do not allow to accept
them.
This commit extends "listen-on" statement with "proxy" options that
allows one to enable PROXYv2 support on a dedicated listener. It can
have the following values:
- "plain" to send PROXYv2 headers without encryption, even in the case
of encrypted transports.
- "encrypted" to send PROXYv2 headers encrypted right after the TLS
handshake.
The system tests on OpenBSD consistently exhibit lower stability
compared to our other CI platforms. Some of these challenges are
intrinsic to the system test itself and require attention. However,
there are OpenBSD issues, which seem to be more widespread on this
platform than others. In our daily CI pipelines, OpenBSD system tests
often bear the brunt of all failed CI jobs.
It's possible that our OpenBSD CI image could be optimized, but we
currently lack the domain-specific knowledge needed to make
improvements.
The AES algorithm for DNS cookies was being kept for legacy reasons, and
it can be safely removed in the next major release. Remove both the AES
usage for DNS cookies and the AES implementation itself.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
This is first step in removing the lock-file configuration option, it
marks both the `lock-file` configuration directive and -X option to
named as deprecated.
Add the missing documentation for 'dnssec-policy/inline-signing'.
Update the zone-only option 'inline-signing' to indicate that the
use of inline signing should be set in 'dnssec-policy' and that this
is merely a way to override the value for the given zone.
(cherry picked from commit 2b7381950d17fe4d289959e5f76f020cc462200a)
Basically all local data is considered trusted, and proper ACLs and
limits need to be explicitly configured. We are also free to let
protocol non-compliant servers burn in flames.
Read the Docs is capable of building the PDF version of the BIND 9 ARM
using just the contents of the doc/arm/ directory - it does not need the
build system to facilitate that. Since the BIND 9 ARM is also built in
other formats when "make doc" is run, drop the parts of the build system
that enable building the PDF version as they pull in complexity without
bringing much added value in return. Update related files accordingly.
The "Needs Refresh" flag is exposed in two places in the statistics
channel: first - there is a state called "Needs Refresh", when the
process hasn't started yet, but the zone needs a refresh, and second
- there there is a field called "Additional Refresh Queued", when the
process is ongoing, but another refresh is queued for the same zone.
The DNS_ZONEFLG_NEEDREFRESH flag, however, is set only when there is
an ongoing zone transfer and a new notify is received. That is, the
flag is not set for the first case above.
In order to fix the issue, use the DNS_ZONEFLG_NEEDREFRESH flag only
when the zone transfer is running, otherwise, decide whether a zone
needs a refresh using its refresh and expire times.
The XFRST_INITIALSOA state in the xfrin module is named like that,
because the first RR in a zone transfer must be SOA. However, the
name of the state is a bit confusing (especially when exposed to
the users with statistics channel), because it can be mistaken with
the refresh SOA request step, which takes place before the zone
transfer starts.
Rename the state to XFRST_ZONEXFRREQUEST (i.e. Zone Transfer Request).
During that step the state machine performs several operations -
establishing a connection, sending a request, and receiving/parsing
the first RR in the answer.
Improve the "Duration (s)" field, so that it can show the duration of
all the major states of an incoming zone transfer process, while they
are taking place. In particular, it will now show the duration of the
"Pending", "Refresh SOA" and "Deferred" states too, before the actual
zone transfer starts.
With adding this state to the statistics channel, it can now show
the zone transfer in this state instead of as "Pending" when the
zone.c module is performing a refresh SOA request, before actually
starting the transfer process. This will help to understand
whether the process is waiting because of the rate limiter (i.e.
"Pending"), or the rate limiter is passed and it is now waiting for
the refresh SOA query to complete or time out.
Add a new field in the incoming zone transfers section of the
statistics channel to show the transport used for the SOA request.
When the transfer is started beginning from the XFRST_SOAQUERY state,
it means that the SOA query will be performed by xfrin itself, using
the same transport. Otherwise, it means that the SOA query was already
performed by other means (e.g. by zone.c:soa_query()), and, in that
case, we use the SOA query transport type information passed by the
'soa_transport_type' argument, when the xfrin object was created.
The new :cve: Sphinx role takes a CVE number as an argument and creates
a hyperlink to the relevant ISC Knowledgebase document that might have
more up-to-date or verbose information than the relevant release note.
This makes reaching ISC Knowledgebase pages directly from the release
notes easier.
Make all CVE references in the release notes use the new Sphinx role.
The Unix Domain Sockets support in BIND 9 has been completely disabled
since BIND 9.18 and it has been a fatal error since then. Cleanup the
code and the documentation that suggest that Unix Domain Sockets are
supported.
Add a configuration option, resolver-use-dns64, which when true
will cause named to map IPv4 address to IPv6 addresses using the
view's DNS64 mapping rules when making iterative queries.
The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature.
Remove the feature to simplify the code.
Add the text "TTL-style unit suffixes or ISO 8601 duration formats",
just like we do at other places that are duration option types.
Also, in the dnssec-policy "keys" example, use a TTL-style unit too.
There's a statement that says: "Here is an example (for illustration
purposes only) of some possible entries in a [keys] list:", and that
links to the wrong "keys" statement (it links to the TSIG keys section).
Remove the reference, as we are already in the right section.
The doc/arm/requirements.txt file is the single source of truth when it
comes to Sphinx tools versions used to build documentation via
util/release-tarball-comparison.sh.
Move i386 and other less common or ancient CPU architectures to
Community-Maintened category. Move armhf and arm64 to the Best-Effort
category as we do test them as part of development work (new MacBooks
are all arm64), we don't really do full set of tests in the CI.
This adds support for User Statically Defined Tracing (USDT). On
Linux, this uses the header from SystemTap and dtrace utility, but the
support is universal as long as dtrace is available.
Also add the required infrastructure to add probes to libisc, libdns and
libns libraries, where most of the probes will be.
these options concentrate zone maintenance actions into
bursts for the benefit of servers with intermittent connections.
that's no longer something we really need to optimize.
Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
These two configuration options worked in conjunction with 'auto-dnssec'
to determine KSK usage, and thus are now obsoleted.
However, in the code we keep KSK processing so that when a zone is
reconfigured from using 'dnssec-policy' immediately to 'none' (without
going through 'insecure'), the zone is not immediately made bogus.
Add one more test case for going straight to none, now with a dynamic
zone (no inline-signing).
Update the ARM and DNSSEC guide, removing references to 'auto-dnssec',
replacing them with 'dnssec-policy' if needed.
The section "Alternative Ways" of signing has to be refactored, since
we now only focus on one alternative way, that is manual signing.
After the dns_xfrin was changed to use network manager, the maximum
global (max-transfer-time-in) and idle (max-transfer-idle-in) times for
incoming transfers were turned inoperational because of missing
implementation.
Restore this functionality by implementing the timers for the incoming
transfers.
When shutting down TCP sockets, the read callback calling logic was
flawed, it would call either one less callback or one extra. Fix the
logic in the way:
1. When isc_nm_read() has been called but isc_nm_read_stop() hasn't on
the handle, the read callback will be called with ISC_R_CANCELED to
cancel active reading from the socket/handle.
2. When isc_nm_read() has been called and isc_nm_read_stop() has been
called on the on the handle, the read callback will be called with
ISC_R_SHUTTINGDOWN to signal that the dormant (not-reading) socket
is being shut down.
3. The .reading and .recv_read flags are little bit tricky. The
.reading flag indicates if the outer layer is reading the data (that
would be uv_tcp_t for TCP and isc_nmsocket_t (TCP) for TLSStream),
the .recv_read flag indicates whether somebody is interested in the
data read from the socket.
Usually, you would expect that the .reading should be false when
.recv_read is false, but it gets even more tricky with TLSStream as
the TLS protocol might need to read from the socket even when sending
data.
Fix the usage of the .recv_read and .reading flags in the TLSStream
to their true meaning - which mostly consist of using .recv_read
everywhere and then wrapping isc_nm_read() and isc_nm_read_stop()
with the .reading flag.
4. The TLS failed read helper has been modified to resemble the TCP code
as much as possible, clearing and re-setting the .recv_read flag in
the TCP timeout code has been fixed and .recv_read is now cleared
when isc_nm_read_stop() has been called on the streaming socket.
5. The use of Network Manager in the named_controlconf, isccc_ccmsg, and
isc_httpd units have been greatly simplified due to the improved design.
6. More unit tests for TCP and TLS testing the shutdown conditions have
been added.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Artem Boldariev <artem@isc.org>
If the 'checkds' option is not explicitly set, check if there are
'parental-agents' for the zone configured. If so, default to "explicit",
otherwise default to "yes".
Add a new configuration option to set how the checkds method should
work. Acceptable values are 'yes', 'no', and 'explicit'.
When set to 'yes', the checkds method is to lookup the parental agents
by querying the NS records of the parent zone.
When set to 'no', no checkds method is enabled. Users should run
the 'rndc checkds' command to signal that DS records are published and
withdrawn.
When set to 'explicit', the parental agents are explicitly configured
with the 'parental-agents' configuration option.
Remove the reference to setting the DF-flag as we don't do that right
now. Rephrase the paragraph that the default value should not be
causing fragmentation.
Cleanup the remnants of MS Compiler bits from <isc/refcount.h>, printing
the information in named/main.c, and cleanup some comments about Windows
that no longer apply.
The bits in picohttpparser.{h,c} were left out, because it's not our
code.
for testing purposes, we need to be able to specify a library path from
which to load the dnsrps implementation. this can now be done with the
"dnsrps-library" option.
DNSRPS can now be enabled in configure regardless of whether librpz.so
is currently installed on the system.
With a newline before the :suppress_grammar: directive, it wasn't
actually interpreted as a directive, but rather as node content.
Therefore, the directive was ignored and the grammar was incorrectly
printed out.
These options and zone type were created to address the
SiteFinder controversy, in which certain TLD's redirected queries
rather than returning NXDOMAIN. since TLD's are now DNSSEC-signed,
this is no longer likely to be a problem.
The deprecation message for 'type delegation-only' is issued from
the configuration checker rather than the parser. therefore,
isccfg_check_namedconf() has been modified to take a 'nodeprecate'
parameter to suppress the warning when named-checkconf is used with
the command-line option to ignore warnings on deprecated options (-i).
[func] BIND now requires liburcu for lock-free data structures
and concurrent safe memory reclamation. It replaces the
home-grown lock-free linked list and QSBR machinery
added in changes 6108 and 6109. The qp-trie code has
been adjusted to use liburcu.
BIND needs a collection of standard lock-free data structures,
which we can find in liburcu, along with its RCU safe memory
reclamation machinery. We will use liburcu's QSBR variant instead
of the home-grown isc_qsbr.
without diffie-hellman TKEY negotiation, some other code is
now effectively dead or unnecessary, and can be cleaned up:
- the rndc tsig-list and tsig-delete commands.
- a nonoperational command-line option to dnssec-keygen that
was documented as being specific to DH.
- the section of the ARM that discussed TKEY/DH.
- the functions dns_tkey_builddeletequery(), processdeleteresponse(),
and tkey_processgssresponse(), which are unused.
Completely remove the TKEY Mode 2 (Diffie-Hellman Exchanged Keying) from
BIND 9 (from named, named.conf and all the tools). The TKEY usage is
fringe at best and in all known cases, GSSAPI is being used as it should.
The draft-eastlake-dnsop-rfc2930bis-tkey specifies that:
4.2 Diffie-Hellman Exchanged Keying (Deprecated)
The use of this mode (#2) is NOT RECOMMENDED for the following two
reasons but the specification is still included in Appendix A in case
an implementation is needed for compatibility with old TKEY
implementations. See Section 4.6 on ECDH Exchanged Keying.
The mixing function used does not meet current cryptographic
standards because it uses MD5 [RFC6151].
RSA keys must be excessively long to achieve levels of security
required by current standards.
We might optionally implement Elliptic Curve Diffie-Hellman (ECDH) key
exchange mode 6 if the draft ever reaches the RFC status. Meanwhile the
insecure DH mode needs to be removed.
The first working multi-threaded qp-trie was stuck with an unpleasant
trade-off:
* Use `isc_rwlock`, which has acceptable write performance, but
terrible read scalability because the qp-trie made all accesses
through a single lock.
* Use `liburcu`, which has great read scalability, but terrible
write performance, because I was relying on `rcu_synchronize()`
which is rather slow. And `liburcu` is LGPL.
To get the best of both worlds, we need our own scalable read side,
which we now have with `isc_qsbr`. And we need to modify the write
side so that it is not blocked by readers.
Better write performance requires an async cleanup function like
`call_rcu()`, instead of the blocking `rcu_synchronize()`. (There
is no blocking cleanup in `isc_qsbr`, because I have concluded
that it would be an attractive nuisance.)
Until now, all my multithreading qp-trie designs have been based
around two versions, read-only and mutable. This is too few to
work with asynchronous cleanup. The bare minimum (as in epoch
based reclamation) is three, but it makes more sense to support an
arbitrary number. Doing multi-version support "properly" makes
fewer assumptions about how safe memory reclamation works, and it
makes snapshots and rollbacks simpler.
To avoid making the memory management even more complicated, I
have introduced a new kind of "packed reader node" to anchor the
root of a version of the trie. This is simpler because it re-uses
the existing chunk lifetime logic - see the discussion under
"packed reader nodes" in `qp_p.h`.
I have also made the chunk lifetime logic simpler. The idea of a
"generation" is gone; instead, chunks are either mutable or
immutable. And the QSBR phase number is used to indicate when a
chunk can be reclaimed.
Instead of the `shared_base` flag (which was basically a one-bit
reference count, with a two version limit) the base array now has a
refcount, which replaces the confusing ad-hoc lifetime logic with
something more familiar and systematic.
A qp-trie is a kind of radix tree that is particularly well-suited to
DNS servers. I invented the qp-trie in 2015, based on Dan Bernstein's
crit-bit trees and Phil Bagwell's HAMT. https://dotat.at/prog/qp/
This code incorporates some new ideas that I prototyped using
NLnet Labs NSD in 2020 (optimizations for DNS names as keys)
and 2021 (custom allocator and garbage collector).
https://dotat.at/cgi/git/nsd.git
The BIND version of my qp-trie code has a number of improvements
compared to the prototype developed for NSD.
* The main omission in the prototype was the very sketchy outline of
how locking might work. Now the locking has been implemented,
using a reader/writer lock and a mutex. However, it is designed to
benefit from liburcu if that is available.
* The prototype was designed for two-version concurrency, one
version for readers and one for the writer. The new code supports
multiversion concurrency, to provide a basis for BIND's dbversion
machinery, so that updates are not blocked by long-running zone
transfers.
* There are now two kinds of transaction that modify the trie: an
`update` aims to support many very small zones without wasting
memory; a `write` avoids unnecessary allocation to help the
performance of many small changes to the cache.
* There is also a single-threaded interface for situations where
concurrent access is not necessary.
* The API makes better use of types to make it more clear which
operations are permitted when.
* The lookup table used to convert a DNS name to a qp-trie key is
now initialized by a run-time constructor instead of a programmer
using copy-and-paste. Key conversion is more flexible, so the
qp-trie can be used with keys other than DNS names.
* There has been much refactoring and re-arranging things to improve
the terminology and order of presentation in the code, and the
internal documentation has been moved from a comment into a file
of its own.
Some of the required functionality has been stripped out, to be
brought back later after the basics are known to work.
* Garbage collector performance statistics are missing.
* Fancy searches are missing, such as longest match and
nearest match.
* Iteration is missing.
* Search for update is missing, for cases where the caller needs to
know if the value object is mutable or not.
`libirs` used to be a reference implementation of `getaddrinfo` and
related modern resolver APIs. It was stripped down in BIND 9.18
leaving only the `irs_resconf` module, which parses
`/etc/resolv.conf`. I have kept its include path and namespace prefix,
so it remains a little fragment of libirs now embedded in libdns.
This "quiescent state based reclamation" module provides support for
the qp-trie module in dns/qp. It is a replacement for liburcu, written
without reference to the urcu source code, and in fact it works in a
significantly different way.
A few specifics of BIND make this variant of QSBR somewhat simpler:
* We can require that wait-free access to a qp-trie only happens in
an isc_loop callback. The loop provides a natural quiescent state,
after the callbacks are done, when no qp-trie access occurs.
* We can dispense with any API like rcu_synchronize(). In practice,
it takes far too long to wait for a grace period to elapse for each
write to a data structure.
* We use the idea of "phases" (aka epochs or eras) from EBR to
reduce the amount of bookkeeping needed to track memory that is no
longer needed, knowing that the qp-trie does most of that work
already.
I considered hazard pointers for safe memory reclamation. They have
more read-side overhead (updating the hazard pointers) and it wasn't
clear to me how to nicely schedule the cleanup work. Another
alternative, epoch-based reclamation, is designed for fine-grained
lock-free updates, so it needs some rethinking to work well with the
heavily read-biased design of the qp-trie. QSBR has the fastest read
side of the basic SMR algorithms (with no barriers), and fits well
into a libuv loop. More recent hybrid SMR algorithms do not appear to
have enough benefits to justify the extra complexity.
Add a singly-linked stack that supports lock-free prepend and drain (to
empty the list and clean up its elements). Intended for use with QSBR
to collect objects that need safe memory reclamation, or any other user
that works with adding objects to the stack and then draining them in
one go like various work queues.
In <isc/atomic.h>, add an `atomic_ptr()` macro to make type
declarations a little less abominable, and clean up a duplicate
definition of `atomic_compare_exchange_strong_acq_rel()`
removed references in code comments, doc/dev documentation, etc, to
isc_task, isc_timer_reset(), and isc_timertype_inactive. also removed a
coccinelle patch related to isc_timer_reset() that was no longer needed.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
- removed documentation of -S option from named man page
- removed documentation of reserved-sockets from ARM
- simplified documentation of dnssec-secure-to-insecure - it
now just says it's obsolete rather than describing what it
doesn't do anymore
- marked three formerly obsolete options as ancient:
parent-registration-delay, reserved-sockets, and
suppress-initial-notify
We don't need them in the repo, it's sufficient if we pregenerate them
while preparing the tarball. That way we don't have overhead while
modifying them but they are still available for installations without
Sphinx.
I assume that this will make rebases and cherry-picks across branches
easier, with less trial and error churn required in the CI.
It's implemented in the way that we build the manpages only when we
either have pregenerated pages available at the configure time or
sphinx-build is installed and working.
The implementation of UDP recvmmsg in libuv 1.35 and 1.36 is
incomplete and could cause assertion failure under certain
circumstances.
Modify the configure and runtime checks to report a fatal error when
trying to compile or run with the affected versions.
The RHEL (and clones) 7 will reach EOL in June 2024, shortly after BIND
9.20 will be released. Drop the support for building on those
platforms, so we can use features of modern operating systems - newer
compiler that supports at least subset of C23 and OpenSSL 1.1/3.0.
This will simplify some of the code that we are using in BIND 9.
the built-in trust anchors in named and delv are sufficent for
validation. named still needs to be able to load trust anchors from
a bind.keys file for testing purposes, but it doesn't need to be
the default behavior.
we now only load trust anchors from a file if explicitly specified
via the "bindkeys-file" option in named or the "-a" command line
argument to delv. documentation has been cleaned up to remove references
to /etc/bind.keys.
Closes#3850.
A 'tls' statement can be specified both for individual addresses
and for the whole list (as a default value when an individual
address doesn't have its own 'tls' set), just as it was done
before for the 'port' value.
Create a new function 'print_rawqstring()' to print a string residing
in a 'isc_textregion_t' type parameter.
Create a new function 'copy_string()' to copy a string from a
'cfg_obj_t' object into a 'isc_textregion_t'.
Deprecate the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Also deprecate use-{v4,v6}-udp-ports and avoid-{v4,v6}udp-ports.
limit the number of simultaneous DNS UPDATE events that can be
processed by adding a quota for update and update forwarding.
this quota currently, arbitrarily, defaults to 100.
also add a statistics counter to record when the update quota
has been exceeded.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Add a new way to configure the preferred source address when talking to
remote servers such as primaries and parental-agents. This will
eventually deprecate options such as 'parental-source',
'parental-source-v6', 'transfer-source', etc.
Example of the new configuration:
parental-agents "parents" port 5353 \
source 10.10.10.10 port 5354 dscp 54 \
source-v6 2001:db8::10 port 5355 dscp 55 {
10.10.10.11;
2001:db8::11;
};
After deprecating the operating system limits settings (coresize,
datasize, files and stacksize), mark them as ancient and remove the code
that sets the values from config.
After change 5995, zone transfers were using a small
compression context that only had space for the first
few dozen names in each message. They now use a large
compression context with enough space for every name.
Remove the text from the ARM and DNSSEC guide that describes how to do
key and denial of existence operations using dynamic update. Add a new
section about DNSSEC multi-signer models, but no longer suggest using
dynamic update and auto-dnssec allow.
It was possible to set operating system limits (RLIMIT_DATA,
RLIMIT_STACK, RLIMIT_CORE and RLIMIT_NOFILE) from named.conf. It's
better to leave these untouched as setting these is responsibility of
the operating system and/or supervisor.
Deprecate the configuration options and remove them in future BIND 9
release.
