This commit extends the perl Configure script to also check for libssl
in addition to libcrypto and change the vcxproj source files to link
with both libcrypto and libssl.
The recv_done() callback had many exit paths with different conditions,
and every path had it's own set of destructors. The refactored code now
has unified exit path with descriptive goto labels matching the intent:
- cancel_lookup
- next_lookup
- detach_query
- keep_query
The only exception to the rule is check_for_more_data() path, where the
part of the query gets reused, so the query->readhandle and query gets
detached on it's own, and by going to the keep_query, we are just
skipping calling the destructors again.
FreeBSD sometimes returns spurious errors in UDP connect() attempts,
so we try a few times before giving up. However, each failed attempt
triggers a call to udp_ready() in dighost.c, and that was causing
the query object to be detached prematurely.
Sometimes, the dig_lookup_t could be destroyed before the final
send_done() callback was be called, leading to dereferencing an
already freed dig_lookup_t object. By making the dig_lookup_t
reference counted, we are ensuring that it won't be freed until
the last reference (from dig_query_t .lookup) is released.
because dig now uses the netmgr, printing of response messages
happens in a different thread than setup. the IDN output filtering
procedure, which set using dns_name_settotextfilter(), is stored as
thread-local data, and so if it's set during setup, it won't be
accessible when printing. we now set it immediately before printing,
in the same thread, and clear it immedately afterward.
The network manager does not support returning UDP datagrams to
clients from unexpected sources; it is therefore not possible for
dig to accept them. The "+[no]unexpected" option has therefore
been removed from the dig command and its documentation.
The dns_message_create() function cannot soft fail (as all memory
allocations either succeed or cause abort), so we change the function to
return void and cleanup the calls.
This commit updates and simplifies the checks for the readline support
in nslookup and nsupdate:
* Change the autoconf checks to pkg-config only, all supported
libraries have accompanying .pc files now.
* Add editline support in addition to libedit and GNU readline
* Add isc/readline.h shim header that defines dummy readline()
function when no readline library is available
The ARM and the manpages have been converted into Sphinx documentation
format.
Sphinx uses reStructuredText as its markup language, and many of its
strengths come from the power and straightforwardness of
reStructuredText and its parsing and translating suite, the Docutils.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
All our MSVS Project files share the same intermediate directory. We
know that this doesn't cause any problems, so we can just disable the
detection in the project files.
Example of the warning:
warning MSB8028: The intermediate directory (.\Release\) contains files shared from another project (dnssectool.vcxproj). This can lead to incorrect clean and rebuild behavior.
Our vcxproj files set the WarningLevel to Level3, which is too verbose
for a code that needs to be portable. That basically leads to ignoring
all the errors that MSVC produces. This commits downgrades the
WarningLevel to Level1 and enables treating warnings as errors for
Release builds. For the Debug builds the WarningLevel got upgraded to
Level4, and treating warnings as errors is explicitly disabled.
We should eventually make the code clean of all MSVC warnings, but it's
a long way to go for Level4, so it's more reasonable to start at Level1.
For reference[1], these are the warning levels as described by MSVC
documentation:
* /W0 suppresses all warnings. It's equivalent to /w.
* /W1 displays level 1 (severe) warnings. /W1 is the default setting
in the command-line compiler.
* /W2 displays level 1 and level 2 (significant) warnings.
* /W3 displays level 1, level 2, and level 3 (production quality)
warnings. /W3 is the default setting in the IDE.
* /W4 displays level 1, level 2, and level 3 warnings, and all level 4
(informational) warnings that aren't off by default. We recommend
that you use this option to provide lint-like warnings. For a new
project, it may be best to use /W4 in all compilations. This option
helps ensure the fewest possible hard-to-find code defects.
* /Wall displays all warnings displayed by /W4 and all other warnings
that /W4 doesn't include — for example, warnings that are off by
default.
* /WX treats all compiler warnings as errors. For a new project, it
may be best to use /WX in all compilations; resolving all warnings
ensures the fewest possible hard-to-find code defects.
1. https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level?view=vs-2019
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
On Windows, C11 localtime_r() and gmtime_r() functions are not
available. While localtime() and gmtime() functions are already thread
safe because they use Thread Local Storage, it's quite ugly to #ifdef
around every localtime_r() and gmtime_r() usage to make the usage also
thread-safe on POSIX platforms.
The commit adds wrappers around Windows localtime_s() and gmtime_s()
functions.
NOTE: The implementation of localtime_s and gmtime_s in Microsoft CRT
are incompatible with the C standard since it has reversed parameter
order and errno_t return type.
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
this corrects some style glitches such as:
```
long_function_call(arg, arg2, arg3, arg4, arg5, "str"
"ing");
```
...by adjusting the penalties for breaking strings and call
parameter lists.
