The draft says that the NSEC(3) TTL must have the same TTL value
as the minimum of the SOA MINIMUM field and the SOA TTL. This was
always the intended behaviour.
Update the zone structure to also track the SOA TTL. Whenever we
use the MINIMUM value to determine the NSEC(3) TTL, use the minimum
of MINIMUM and SOA TTL instead.
There is no specific test for this, however two tests need adjusting
because otherwise they failed: They were testing for NSEC3 records
including the TTL. Update these checks to use 600 (the SOA TTL),
rather than 3600 (the SOA MINIMUM).
(cherry picked from commit 9af8caa733)
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
(cherry picked from commit e43b3c1fa1)
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
(cherry picked from commit 16e14353b1)
There a race between when the delta is logged and when the
server returns signed record. Retry the queries if the
lookups fail to meet expectations.
(cherry picked from commit 46c4e5d96f)
The autosign test has a test case where a DNSSEC maintaiend zone
has a set of DNSSEC keys without any timing metadata set. It
tests if named picks up the key for publication and signing if a
delayed dnssec-settime/loadkeys event has occured.
The test failed intermittently despite the fact it sleeps for 5
seconds but the triggered key reconfigure action should happen after
3 seconds.
However, the test output showed that the test query came in before
the key reconfigure action was complete (see excerpts below).
The loadkeys command is received:
15:38:36 received control channel command 'loadkeys delay.example.'
The reconfiguring zone keys action is triggered after 3 seconds:
15:38:39 zone delay.example/IN: reconfiguring zone keys
15:38:39 DNSKEY delay.example/NSEC3RSASHA1/7484 (ZSK) is now published
15:38:39 DNSKEY delay.example/NSEC3RSASHA1/7455 (KSK) is now published
15:38:39 writing to journal
Two seconds later the test query comes in:
15:38:41 client @0x7f1b8c0562b0 10.53.0.1#44177: query
15:38:41 client @0x7f1b8c0562b0 10.53.0.1#44177: endrequest
And 6 more seconds later the reconfigure keys action is complete:
15:38:47 zone delay.example/IN: next key event: 05-Dec-2019 15:48:39
This commit fixes the test by checking the "next key event" log has
been seen before executing the test query, making sure that the
reconfigure keys action has been complete.
This commit however does not fix, nor explain why it took such a long
time (8 seconds) to reconfigure the keys.
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
The oldsigs test was checking only for the validity of the A
a.oldsigs.example. resource record and associated DNSSEC signature while
the zone might not have been fully signed yet leading to validation
failures because of bogus signatures on the validation path.
This commit changes the test to test that all old signatures in the
oldsigs.example. zone were replaced and the zone is fully resigned
before running the main check.
this adds functions in conf.sh.common to create DS-style trust anchor
files. those functions are then used to create nearly all of the trust
anchors in the system tests.
there are a few exceptions:
- some tests in dnssec and mkeys rely on detection of unsupported
algorithms, which only works with key-style trust anchors, so those
are used for those tests in particular.
- the mirror test had a problem with the use of a CSK without a
SEP bit, which still needs addressing
in the future, some of these tests should be changed back to using
traditional trust anchors, so that both types will be exercised going
forward.
the current method used for testing distribution of signatures
is failure-prone. we need to replace it with something both
effective and portable, but in the meantime we're commenting
out the jitter test.
The BusyBox version of awk treats some variables which other awk
implementations consider to be decimal values as octal values. This
intermittently breaks key event interval calculations in the "autosign"
system test, trigger false positives for it. Prevent the problem from
happening by stripping leading zeros from the affected awk variables.
When trying to extract the key ID from a key file name, some test code
incorrectly attempts to strip all leading zeros. This breaks tests when
keys with ID 0 are generated. Add a new helper shell function,
keyfile_to_key_id(), which properly handles keys with ID 0 and use it in
test code whenever a key ID needs to be extracted from a key file name.
When a zone is converted from NSEC to NSEC3, the private record at zone
apex indicating that NSEC3 chain creation is in progress may be removed
during a different (later) zone_nsec3chain() call than the one which
adds the NSEC3PARAM record. The "delzsk.example" zone check only waits
for the NSEC3PARAM record to start appearing in dig output while private
records at zone apex directly affect "rndc signing -list" output. This
may trigger false positives for the "autosign" system test as the output
of the "rndc signing -list" command used for checking ZSK deletion
progress may contain extra lines which are not accounted for. Ensure
the private record is removed from zone apex before triggering ZSK
deletion in the aforementioned check.
Also future-proof the ZSK deletion progress check by making it only look
at lines it should care about.
For all system tests utilizing named instances, call clean.sh from each
test's setup.sh script in a consistent way to make sure running the same
system test multiple times using run.sh does not trigger false positives
caused by stale files created by previous runs.
Ideally we would just call clean.sh from run.sh, but that would break
some quirky system tests like "rpz" or "rpzrecurse" and being consistent
for the time being does not hurt.
Reduce code duplication by replacing a code snippet repeated throughout
system tests using "trusted-keys" and/or "managed-keys" configuration
sections with calls to keyfile_to_{managed,trusted}_keys() helper
functions.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.
- removed a few remaing places where output wasn't being passed
through echo_i or cat_i
- added a "digcomp" function to conf.sh.in to send digcomp.pl output
through cat_i and return the correct exit value
- set SYSTESTDIR when calling echo_i from nsX directories, so that
the test name will always be printed correctly
- fixed a test name typo in conf.sh.in
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
