this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
(cherry picked from commit e43b3c1fa1)
Add a system test that counts how many address fetches are made
for different numbers of NS records and checks that the number
are successfully limited.
Added test to ensure that NXDOMAIN is returned when BIND is queried for a
non existing domain in CH class (if a view of CHAOS class is configured)
and that it also doesn't crash anymore in those cases.
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
These two tests were failing basically because in order for prefetching to
happen, the TTL for a given DNS record must be greater than or equal to
the prefetch config value + 9.
The previous TTL for both records was 10, while prefetch value in
configuration was 3, thus making only records with TTL >= 12 elligible
for prefetching.
TTL value for both records was adjusted to the value 13, and prefetch
value was set to 4 (inc by 1), so records with TTL (4 + 9) >= 13 are
elligible for prefetching.
Adjusting prefetch value to 4 gives the test 1 second more to avoid time
problems when sharing resources on a heavy loaded PC.
Also prefetch value in settings is now read by the script and used
by it to corrrectly calculate the amount of time needed to delay before
sending a request to trigger prefetch, adding a bit of flexibility to
fine tune the test in the future.
The previous test had two problems:
1. It wasn't written specifically for testing what it was supposed to:
prefetch disabled.
2. It could fail in some circunstances if the computer's load is too
high, due to sleeps not taking parallel tests and cpu load into account.
The new test is testing prefetch disabled as follows:
1. It asks for a txt record for a given domain and takes note of the
record's TTL (which is 10).
2. It sleeps for (TTL - 5) = 5 seconds, having a window of 5 seconds to
issue new queries before the record expires from cache.
3. Three(3) queries are executed in a row, with a interval of 1 second
between them, and for each query we verify that the TTL in response is
less than the previous one, thus ensuring that prefetch is disabled (if
it were enabled this record would have been refreshed already and TTL
would be >= the first TTL).
Having a window of 5 seconds to perform 3 queries with a interval of 1
second between them gives the test a reasonable amount of time
to not suffer from a machine with heavy load.
this adds functions in conf.sh.common to create DS-style trust anchor
files. those functions are then used to create nearly all of the trust
anchors in the system tests.
there are a few exceptions:
- some tests in dnssec and mkeys rely on detection of unsupported
algorithms, which only works with key-style trust anchors, so those
are used for those tests in particular.
- the mirror test had a problem with the use of a CSK without a
SEP bit, which still needs addressing
in the future, some of these tests should be changed back to using
traditional trust anchors, so that both types will be exercised going
forward.
With the netmgr in use, named may start answering queries before zones
are loaded. This can cause transient failures in system tests after
servers are restarted or reconfigured. This commit adds retry loops
and sleep statements where needed to address this problem.
Also incidentally silenced a clang warning.
- ns__client_request() is now called by netmgr with an isc_nmhandle_t
parameter. The handle can then be permanently associated with an
ns_client object.
- The task manager is paused so that isc_task events that may be
triggred during client processing will not fire until after the netmgr is
finished with it. Before any asynchronous event, the client MUST
call isc_nmhandle_ref(client->handle), to prevent the client from
being reset and reused while waiting for an event to process. When
the asynchronous event is complete, isc_nmhandle_unref(client->handle)
must be called to ensure the handle can be reused later.
- reference counting of client objects is now handled in the nmhandle
object. when the handle references drop to zero, the client's "reset"
callback is used to free temporary resources and reiniialize it,
whereupon the handle (and associated client) is placed in the
"inactive handles" queue. when the sysstem is shutdown and the
handles are cleaned up, the client's "put" callback is called to free
all remaining resources.
- because client allocation is no longer handled in the same way,
the '-T clienttest' option has now been removed and is no longer
used by any system tests.
- the unit tests require wrapping the isc_nmhandle_unref() function;
when LD_WRAP is supported, that is used. otherwise we link a
libwrap.so interposer library and use that.
Some system tests assume dig's default setings are in effect. While
these defaults may only be silently overridden (because of specific
options set in /etc/resolv.conf) for BIND releases using liblwres for
parsing /etc/resolv.conf (i.e. BIND 9.11 and older), it is arguably
prudent to make sure that tests relying on specific +timeout and +tries
settings specify these explicitly in their dig invocations, in order to
prevent test failures from being triggered by any potential changes to
current defaults.
If dots are not escaped in the "1.2.3.4" regular expressions used for
checking whether IP address 1.2.3.4 is present in the tested resolver's
answers, a COOKIE that matches such a regular expression will trigger a
false positive for the "resolver" system test. Properly escape dots in
the aforementioned regular expressions to prevent that from happening.
For all system tests utilizing named instances, call clean.sh from each
test's setup.sh script in a consistent way to make sure running the same
system test multiple times using run.sh does not trigger false positives
caused by stale files created by previous runs.
Ideally we would just call clean.sh from run.sh, but that would break
some quirky system tests like "rpz" or "rpzrecurse" and being consistent
for the time being does not hurt.
Commit ba91243542 causes the resolver to
respond to a client query with FORMERR when all upstream queries sent to
the servers authoritative for QNAME elicit FORMERR responses. This
happens because resolver code returns DNS_R_FORMERR in such a case and
dns_result_torcode() acts as a pass-through for all arguments which are
already a valid RCODE.
The correct RCODE to set in the response returned to the client in the
case described above is SERVFAIL. Make sure this happens by overriding
the RCODE in query_gotanswer(), on the grounds that any format errors in
the client query itself should be caught long before execution reaches
that point. This change should not reduce query error logging accuracy
as the resolver code itself reports the exact reason for returning a
DNS_R_FORMERR result using log_formerr().
As part of resquery_response() refactoring [1], a goto statement was
replaced [2] with a call to a new function - originally called
rctx_delegation(), now folded into rctx_answer_none() - extracted from
existing code. However, one call site of that refactored function does
not reset the "result" variable, causing a referral with a non-empty
ANSWER section to be inadvertently treated as an error, which prevents
resolution of names reliant on servers sending such responses. Fix by
resetting the "result" variable to ISC_R_SUCCESS when a response
containing a non-empty ANSWER section can be treated as a delegation.
[1] see RT #45362
[2] see commit e1380a16741a3b4a57e54d7a9ce09dd12691522f
Prevent ans2.pl from responding authoritatively for any name at or below
example.net.
Make ans3.pl properly answer example.net/NS queries. Use string
comparisons instead of regular expressions where possible.
Net::DNS versions older than 0.68 insert a ./ANY RR into the QUESTION
section if the latter is empty. Since the latest Net::DNS version
available with stock RHEL/CentOS 6 packages is 0.65 and we officially
support that operating system, bin/tests/system/resolver/ans8/ans.pl
should behave consistently for various Net::DNS versions. Ensure that
by making handleUDP() return the query ID and flags generated by
Net::DNS with 8 zero bytes appended.
Reduce code duplication by replacing a code snippet repeated throughout
system tests using "trusted-keys" and/or "managed-keys" configuration
sections with calls to keyfile_to_{managed,trusted}_keys() helper
functions.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
