While cleaning up the usage of HAVE_UV_<func> macros, we forgot to
cleanup the HAVE_UV_UDP_CONNECT in the actual code and
HAVE_UV_TRANSLATE_SYS_ERROR and this was causing Windows build to fail
on uv_udp_send() because the socket was already connected and we were
falsely assuming that it was not.
The platforms with autoconf support were not affected, because we were
still checking for the functions from the configure.
(cherry picked from commit 67afea6cfc)
The isc_nmiface_t type was holding just a single isc_sockaddr_t,
so we got rid of the datatype and use plain isc_sockaddr_t in place
where isc_nmiface_t was used before. This means less type-casting and
shorter path to access isc_sockaddr_t members.
At the same time, instead of keeping the reference to the isc_sockaddr_t
that was passed to us when we start listening, we will keep a local
copy. This prevents the data race on destruction of the ns_interface_t
objects where pending nmsockets could reference the sockaddr of already
destroyed ns_interface_t object.
(cherry picked from commit 50270de8a0)
this rolls up numerous changes that have been applied to the
main branch, including moving isc_task operations into the
netmgr event loops, and other general stabilization.
This commit adds POSIX nanosleep() and usleep() shim implementation for
Windows to help implementors use less #ifdef _WIN32 in the code.
(cherry picked from commit c37ff5d188)
Since all the libraries are internal now, just cleanup the ISCAPI remnants
in isc_socket, isc_task and isc_timer APIs. This means, there's one less
layer as following changes have been done:
* struct isc_socket and struct isc_socketmgr have been removed
* struct isc__socket and struct isc__socketmgr have been renamed
to struct isc_socket and struct isc_socketmgr
* struct isc_task and struct isc_taskmgr have been removed
* struct isc__task and struct isc__taskmgr have been renamed
to struct isc_task and struct isc_taskmgr
* struct isc_timer and struct isc_timermgr have been removed
* struct isc__timer and struct isc__timermgr have been renamed
to struct isc_timer and struct isc_timermgr
* All the associated code that dealt with typing isc_<foo>
to isc__<foo> and back has been removed.
(cherry picked from commit 16fe0d1f41)
The current isc_time_now uses CLOCK_REALTIME_COARSE which only updates
on a timer tick. This clock is generally fine for millisecond accuracy,
but on servers with 100hz clocks, this clock is nowhere near accurate
enough for microsecond accuracy.
This commit adds a new isc_time_now_hires function that uses
CLOCK_REALTIME, which gives the current time, though it is somewhat
expensive to call. When microsecond accuracy is required, it may be
required to use extra resources for higher accuracy.
(cherry picked from commit ebced74b19)
The tlsdns API is not yet used in the 9.16 branch and the tlsdns_test
fails too often. Temporarily disable running the test until it is
actually needed.
The RFC7828 specifies the keepalive interval to be 16-bit, specified in
units of 100 milliseconds and the configuration options tcp-*-timeouts
are following the suit. The units of 100 milliseconds are very
unintuitive and while we can't change the configuration and presentation
format, we should not follow this weird unit in the API.
This commit changes the isc_nm_(get|set)timeouts() functions to work
with milliseconds and convert the values to milliseconds before passing
them to the function, not just internally.
When AddressSanitizer is in use, disable the internal mempool
implementation and redirect the isc_mempool_get to isc_mem_get
(and similarly for isc_mempool_put). This is the method recommended
by the AddressSanitizer authors for tracking allocations and
deallocations instead of custom poison/unpoison code (see
https://github.com/google/sanitizers/wiki/AddressSanitizerManualPoisoning).
Instead of calling isc_tls_initialize()/isc_tls_destroy() explicitly use
gcc/clang attributes on POSIX and DLLMain on Windows to initialize and
shutdown OpenSSL library.
This resolves the issue when isc_nm_create() / isc_nm_destroy() was
called multiple times and it would call OpenSSL library destructors from
isc_nm_destroy().
At the same time, since we now have introduced the ctor/dtor for libisc,
this commit moves the isc_mem API initialization (the list of the
contexts) and changes the isc_mem_checkdestroyed() to schedule the
checking of memory context on library unload instead of executing the
code immediately.
* Following the example set in 634bdfb16d, the tlsdns netmgr
module now uses libuv and SSL primitives directly, rather than
opening a TLS socket which opens a TCP socket, as the previous
model was difficult to debug. Closes#2335.
* Remove the netmgr tls layer (we will have to re-add it for DoH)
* Add isc_tls API to wrap the OpenSSL SSL_CTX object into libisc
library; move the OpenSSL initialization/deinitialization from dstapi
needed for OpenSSL 1.0.x to the isc_tls_{initialize,destroy}()
* Add couple of new shims needed for OpenSSL 1.0.x
* When LibreSSL is used, require at least version 2.7.0 that
has the best OpenSSL 1.1.x compatibility and auto init/deinit
* Enforce OpenSSL 1.1.x usage on Windows
(cherry picked from commit e493e04c0f)
BIND 9.17 changed exit code of skipped test to meet Automake
expectations in fa505bfb0e. BIND 9.16 was
not rewritten to Automake, but for consistency reasons, the same
SKIPPED_TEST_EXIT_CODE preprocessor macro is used (though the actual
exit code differs from the one in BIND 9.17).
(cherry picked from commit fa505bfb0e)
On FreeBSD, the option to configure connection timeout is called
TCP_KEEPINIT, use it to configure the connection timeout there.
This also fixes the dangling socket problems in the unit test, so
re-enable them.
The isc/util.h header redefine the DbC checks (REQUIRE, INSIST, ...) to
be cmocka "fake" assertions. However that means that cmocka.h needs to
be included after UNIT_TESTING is defined but before isc/util.h is
included. Because isc/util.h is included in most of the project headers
this means that the sequence MUST be:
#define UNIT_TESTING
#include <cmocka.h>
#include <isc/_anything_.h>
See !2204 for other header requirements for including cmocka.h.
(cherry picked from commit 0ba697fe8c)
This is a part of the works that intends to make the netmgr stable,
testable, maintainable and tested. It contains a numerous changes to
the netmgr code and unfortunately, it was not possible to split this
into smaller chunks as the work here needs to be committed as a complete
works.
NOTE: There's a quite a lot of duplicated code between udp.c, tcp.c and
tcpdns.c and it should be a subject to refactoring in the future.
The changes that are included in this commit are listed here
(extensively, but not exclusively):
* The netmgr_test unit test was split into individual tests (udp_test,
tcp_test, tcpdns_test and newly added tcp_quota_test)
* The udp_test and tcp_test has been extended to allow programatic
failures from the libuv API. Unfortunately, we can't use cmocka
mock() and will_return(), so we emulate the behaviour with #define and
including the netmgr/{udp,tcp}.c source file directly.
* The netievents that we put on the nm queue have variable number of
members, out of these the isc_nmsocket_t and isc_nmhandle_t always
needs to be attached before enqueueing the netievent_<foo> and
detached after we have called the isc_nm_async_<foo> to ensure that
the socket (handle) doesn't disappear between scheduling the event and
actually executing the event.
* Cancelling the in-flight TCP connection using libuv requires to call
uv_close() on the original uv_tcp_t handle which just breaks too many
assumptions we have in the netmgr code. Instead of using uv_timer for
TCP connection timeouts, we use platform specific socket option.
* Fix the synchronization between {nm,async}_{listentcp,tcpconnect}
When isc_nm_listentcp() or isc_nm_tcpconnect() is called it was
waiting for socket to either end up with error (that path was fine) or
to be listening or connected using condition variable and mutex.
Several things could happen:
0. everything is ok
1. the waiting thread would miss the SIGNAL() - because the enqueued
event would be processed faster than we could start WAIT()ing.
In case the operation would end up with error, it would be ok, as
the error variable would be unchanged.
2. the waiting thread miss the sock->{connected,listening} = `true`
would be set to `false` in the tcp_{listen,connect}close_cb() as
the connection would be so short lived that the socket would be
closed before we could even start WAIT()ing
* The tcpdns has been converted to using libuv directly. Previously,
the tcpdns protocol used tcp protocol from netmgr, this proved to be
very complicated to understand, fix and make changes to. The new
tcpdns protocol is modeled in a similar way how tcp netmgr protocol.
Closes: #2194, #2283, #2318, #2266, #2034, #1920
* The tcp and tcpdns is now not using isc_uv_import/isc_uv_export to
pass accepted TCP sockets between netthreads, but instead (similar to
UDP) uses per netthread uv_loop listener. This greatly reduces the
complexity as the socket is always run in the associated nm and uv
loops, and we are also not touching the libuv internals.
There's an unfortunate side effect though, the new code requires
support for load-balanced sockets from the operating system for both
UDP and TCP (see #2137). If the operating system doesn't support the
load balanced sockets (either SO_REUSEPORT on Linux or SO_REUSEPORT_LB
on FreeBSD 12+), the number of netthreads is limited to 1.
* The netmgr has now two debugging #ifdefs:
1. Already existing NETMGR_TRACE prints any dangling nmsockets and
nmhandles before triggering assertion failure. This options would
reduce performance when enabled, but in theory, it could be enabled
on low-performance systems.
2. New NETMGR_TRACE_VERBOSE option has been added that enables
extensive netmgr logging that allows the software engineer to
precisely track any attach/detach operations on the nmsockets and
nmhandles. This is not suitable for any kind of production
machine, only for debugging.
* The tlsdns netmgr protocol has been split from the tcpdns and it still
uses the old method of stacking the netmgr boxes on top of each other.
We will have to refactor the tlsdns netmgr protocol to use the same
approach - build the stack using only libuv and openssl.
* Limit but not assert the tcp buffer size in tcp_alloc_cb
Closes: #2061
(cherry picked from commit 634bdfb16d)
Make sure pointer checks in unit tests use cmocka assertion macros
dedicated for use with pointers instead of those dedicated for use with
integers or booleans.
(cherry picked from commit f440600126)
cppcheck 2.2 reports the following false positive:
lib/isc/tests/quota_test.c:71:21: error: Array 'quotas[101]' accessed at index 110, which is out of bounds. [arrayIndexOutOfBounds]
isc_quota_t *quotas[110];
^
The above is not even an array access, so this report is obviously
caused by a cppcheck bug. Yet, it seems to be triggered by the presence
of the add_quota() macro, which should really be a function. Convert
the add_quota() macro to a function in order to make the code cleaner
and to prevent the above cppcheck 2.2 false positive from being
triggered.
(cherry picked from commit ea54a932d2)
Creation of EVP_MD_CTX and EVP_PKEY is quite expensive, so until we fix the code
to reuse the OpenSSL contexts and keys we'll use our own implementation of
siphash instead of trying to integrate with OpenSSL.
(cherry picked from commit 21d751dfc7)
In case of a test failure we weren't tearing down sockets and tasks
properly, causing the test to hang instead of failing nicely.
(cherry picked from commit 4a8d9250cf)
Originally, every library and binaries got linked to everything, which
creates unnecessary overlinking. This wasn't as straightforward as it
should be as we still support configuration without libtool for 9.16.
Couple of smaller issues related to include headers and an issue where
sanitizer overload dlopen and dlclose symbols, so we were getting false
negatives in the autoconf test.
The <isc/md.h> header directly included <openssl/evp.h> header which
enforced all users of the libisc library to explicitly list the include
path to OpenSSL and link with -lcrypto. By hiding the specific
implementation into the private namespace, we no longer enforce this.
In the long run, this might also allow us to switch cryptographic
library implementation without affecting the downstream users.
While making the isc_md_type_t type opaque, the API using the data type
was changed to use the pointer to isc_md_type_t instead of using the
type directly.
(cherry picked from commit 4e114f8ed6)
We introduce a isc_quota_attach_cb function - if ISC_R_QUOTA is returned
at the time the function is called, then a callback will be called when
there's quota available (with quota already attached). The callbacks are
organized as a LIFO queue in the quota structure.
It's needed for TCP client quota - with old networking code we had one
single place where tcp clients quota was processed so we could resume
accepting when the we had spare slots, but it's gone with netmgr - now
we need to notify the listener/accepter that there's quota available so
that it can resume accepting.
Remove unused isc_quota_force() function.
The isc_quote_reserve and isc_quota_release were used only internally
from the quota.c and the tests. We should not expose API we are not
using.
(cherry picked from commit d151a10f30)
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
(cherry picked from commit 0b793166d0)
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
(cherry picked from commit fc967ba092)
Start enforcing the clang-format rules on changed files
Closes#46
See merge request isc-projects/bind9!3063
(cherry picked from commit a04cdde45d)
d2b5853b Start enforcing the clang-format rules on changed files
618947c6 Switch AlwaysBreakAfterReturnType from TopLevelDefinitions to All
654927c8 Add separate .clang-format files for headers
5777c44a Reformat using the new rules
60d29f69 Don't enforce copyrights on .clang-format
adjust clang-format options to get closer to ISC style
See merge request isc-projects/bind9!3061
(cherry picked from commit d3b49b6675)
0255a974 revise .clang-format and add a C formatting script in util
e851ed0b apply the modified style
Add curly braces using uncrustify and then reformat with clang-format back
Closes#46
See merge request isc-projects/bind9!3057
(cherry picked from commit 67b68e06ad)
36c6105e Use coccinelle to add braces to nested single line statement
d14bb713 Add copy of run-clang-tidy that can fixup the filepaths
056e133c Use clang-tidy to add curly braces around one-line statements
Reformat source code with clang-format
Closes#46
See merge request isc-projects/bind9!2156
(cherry picked from commit 7099e79a9b)
4c3b063e Import Linux kernel .clang-format with small modifications
f50b1e06 Use clang-format to reformat the source files
11341c76 Update the definition files for Windows
df6c1f76 Remove tkey_test (which is no-op anyway)
The isc_buffer_allocate() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_buffer_allocate() now returns void.
The isc_mempool_create() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_mempool_create() now returns void.
isc_mem_traceflag_test messes with stdout/stderr, which can cause
problems with subsequent tests (no output, libuv problems). Moving that
test case to the end ensures there are no side effects.
