this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
"rndc signing -serial <value>" could take longer than a second to
complete. Loop waiting for update to succeed.
For tests where "rndc signing -serial <value>" is supposed to not
succeed, repeatedly test that we don't get the new serial, then
test that we have the old value. This should prevent false negatives.
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
this adds functions in conf.sh.common to create DS-style trust anchor
files. those functions are then used to create nearly all of the trust
anchors in the system tests.
there are a few exceptions:
- some tests in dnssec and mkeys rely on detection of unsupported
algorithms, which only works with key-style trust anchors, so those
are used for those tests in particular.
- the mirror test had a problem with the use of a CSK without a
SEP bit, which still needs addressing
in the future, some of these tests should be changed back to using
traditional trust anchors, so that both types will be exercised going
forward.
Temporary files created by a given system test should be removed by its
clean.sh script, not its setup.sh script. Remove redundant "rm"
invocations from setup.sh scripts. Move required "rm" invocations from
setup.sh scripts to their corresponding clean.sh scripts.
A short time window exists between logging the addition of an NSEC3PARAM
record to a zone and committing it to the current version of the zone
database. If a query arrives during such a time window, an unsigned
response will be returned. One of the checks in the "inline" system
test requires NSEC3 records to be present in an answer - that check
would fail in the case described above. Use rndc instead of log
watching for checking whether zone signing and NSEC3 chain modifications
are complete in order to prevent intermittent "inline" system test
failures.
While "rndc reload" causes dns_zone_asyncload() to be called for the
signed version of an inline-signed zone, the subsequent zone_load() call
causes the raw version to be reloaded from storage. This means that
DNS_ZONEFLG_LOADPENDING gets set for the signed version of the zone by
dns_zone_asyncload() before the reload is attempted, but zone_postload()
is only called for the raw version and thus DNS_ZONEFLG_LOADPENDING is
cleared for the raw version, but not for the signed version. This in
turn prevents zone maintenance from happening for the signed version of
the zone.
Until commit 29b7efdd9f, this problem
remained dormant because DNS_ZONEFLG_LOADPENDING was previously
immediately, unconditionally cleared after zone loading was started
(whereas it should only be cleared when zone loading is finished or an
error occurs). This behavior caused other issues [1] and thus had to be
changed.
Fix reloading inline-signed zones by clearing DNS_ZONEFLG_LOADPENDING
for the signed version of the zone once the raw version reload
completes. Take care not to clear it prematurely during initial zone
load. Also make sure that DNS_ZONEFLG_LOADPENDING gets cleared when
zone_postload() encounters an error or returns early, to prevent other
scenarios from resulting in the same problem. Add comments aiming to
help explain code flow.
[1] see RT #47076
When an inline-signed zone is loaded, the master file for its signed
version is loaded and then a rollforward of the journal for the signed
version of the zone is performed. If DNS_JOURNALOPT_RESIGN is not set
during the latter phase, signatures loaded from the journal for the
signed version of the zone will not be scheduled for refresh. Fix the
conditional expression determining which flags should be used for the
dns_journal_rollforward() call so that DNS_JOURNALOPT_RESIGN is set when
zone_postload() is called for the signed version of an inline-signed
zone.
Extend bin/tests/system/stop.pl so that it can use "rndc halt" instead
of "rndc stop" as the former allows master file flushing upon shutdown
to be suppressed.
Each zone used in the "inline" system test contains a few dozen records.
Over a dozen of these zones are used in the test. Most records present
in these zones are not subsequently used in the test itself, but all of
them need to be signed by the named instances launched by the test,
which puts quite a bit of strain on lower-end machines, leading to
intermittent failures of the "inline" system test. Remove all redundant
records from the zones used in the "inline" system test in order to
stabilize it.
If "rndc signing -nsec3param ..." is ran for a zone which has not yet
been loaded or transferred (i.e. its "db" field is NULL), it will be
silently ignored by named despite rndc logging an "nsec3param request
queued" message, which is misleading. Prevent this by keeping a
per-zone queue of NSEC3PARAM change requests which arrive before a zone
is loaded or transferred and processing that queue once the raw version
of an inline-signed zone becomes available.
Reduce code duplication by replacing a code snippet repeated throughout
system tests using "trusted-keys" and/or "managed-keys" configuration
sections with calls to keyfile_to_{managed,trusted}_keys() helper
functions.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.
When inline signing is enabled for a zone without creating signing keys
for it, changes subsequently applied to the raw zone will not be
reflected in the secure zone due to the dns_update_signaturesinc() call
inside receive_secure_serial() failing. Given that an inline zone will
be served (without any signatures) even with no associated signing keys
being present, keep applying raw zone deltas to the secure zone until
keys become available in an attempt to follow the principle of least
astonishment.
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
properly determining if there were active KSK and
ZSK keys for a algorithm when update-check-ksk is
true (default) leaving records unsigned. [RT #46743]
4727. [bug] Retransferring an inline-signed slave using NSEC3
around the time its NSEC3 salt was changed could result
in an infinite signing loop. [RT #45080]
