Fix Coverity CHECKED_RETURN reports for dst_key_getbool(). In most
cases we do not really care about its return value, but it is prudent
to check it.
In one case, where a dst_key_getbool() error should be treated
identically as success, cast the return value to void and add a relevant
comment.
- using an isc_task to execute all rndc functions makes it relatively
simple for them to acquire task exclusive mode when needed
- control_recvmessage() has been separated into two functions,
control_recvmessage() and control_respond(). the respond function
can be called immediately from control_recvmessage() when processing
a nonce, or it can be called after returning from the task event
that ran the rndc command function.
- updated libisccc to use netmgr events
- updated rndc to use isc_nm_tcpconnect() to establish connections
- updated control channel to use isc_nm_listentcp()
open issues:
- the control channel timeout was previously 60 seconds, but it is now
overridden by the TCP idle timeout setting, which defaults to 30
seconds. we should add a function that sets the timeout value for
a specific listener socket, instead of always using the global value
set in the netmgr. (for the moment, since 30 seconds is a reasonable
timeout for the control channel, I'm not prioritizing this.)
- the netmgr currently has no support for UNIX-domain sockets; until
this is addressed, it will not be possible to configure rndc to use
them. we will need to either fix this or document the change in
behavior.
The basic scenario for the problem was that in the process of
resolving a query, if any rrset was eligible for prefetching, then it
would trigger a call to query_prefetch(), this call would run in
parallel to the normal query processing.
The problem arises due to the fact that both query_prefetch(), and,
in the original thread, a call to ns_query_recurse(), try to attach
to the recursionquota, but recursing client stats counter is only
incremented if ns_query_recurse() attachs to it first.
Conversely, if fetch_callback() is called before prefetch_done(),
it would not only detach from recursionquota, but also decrement
the stats counter, if query_prefetch() attached to te quota first
that would result in a decrement not matched by an increment, as
expected.
To solve this issue an atomic bool was added, it is set once in
ns_query_recurse(), allowing fetch_callback() to check for it
and decrement stats accordingly.
For a more compreensive explanation check the thread comment below:
https://gitlab.isc.org/isc-projects/bind9/-/issues/1719#note_145857
If too many versions of log / dnstap files to be saved where requests
the memory after to_keep could be overwritten. Force the number of
versions to be saved to a save level. Additionally the memmove length
was incorrect.
When "rndc reconfig" is run, named first configures a fresh set of views
and then tears down the old views. Consider what happens for a single
view with LMDB enabled; "envA" is the pointer to the LMDB environment
used by the original/old version of the view, "envB" is the pointer to
the same LMDB environment used by the new version of that view:
1. mdb_env_open(envA) is called when the view is first created.
2. "rndc reconfig" is called.
3. mdb_env_open(envB) is called for the new instance of the view.
4. mdb_env_close(envA) is called for the old instance of the view.
This seems to have worked so far. However, an upstream change [1] in
LMDB which will be part of its 0.9.26 release prevents the above
sequence of calls from working as intended because the locktable mutexes
will now get destroyed by the mdb_env_close() call in step 4 above,
causing any subsequent mdb_txn_begin() calls to fail (because all of the
above steps are happening within a single named process).
Preventing the above scenario from happening would require either
redesigning the way we use LMDB in BIND, which is not something we can
easily backport, or redesigning the way BIND carries out its
reconfiguration process, which would be an even more severe change.
To work around the problem, set MDB_NOLOCK when calling mdb_env_open()
to stop LMDB from controlling concurrent access to the database and do
the necessary locking in named instead. Reuse the view->new_zone_lock
mutex for this purpose to prevent the need for modifying struct dns_view
(which would necessitate library API version bumps). Drop use of
MDB_NOTLS as it is made redundant by MDB_NOLOCK: MDB_NOTLS only affects
where LMDB reader locktable slots are stored while MDB_NOLOCK prevents
the reader locktable from being used altogether.
[1] 2fd44e3251
The ThreadSanitizer found a data race when updating the stale header.
Instead of trying to acquire the write lock and failing occasionally
which would skew the statistics, the dns_rdatasetheader_t.attributes
field has been promoted to use stdatomics. Updating the attributes in
the mark_header_ancient() and mark_header_stale() now uses the cmpxchg
to update the attributes forfeiting the need to hold the write lock on
the tree. Please note that mark_header_ancient() still needs to hold
the lock because .dirty is being updated in the same go.
The stdatomic shims for non-C11 compilers (Windows, old gcc, ...) and
mutexatomic implemented only and minimal subset of the atomic types.
This commit adds 16-bit operations for Windows and all atomic types as
defined in standard.
it is now an error to have two primaries lists with the same
name. this is true regardless of whether the "primaries" or
"masters" keywords were used to define them.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
We erroneously tried to destroy a socket after issuing
isc__nm_tcp{,dns}_close. Under some (race) circumstances we could get
nm_socket_cleanup to be called twice for the same socket, causing an
access to a dead memory.
There's a possibility of race in isc__nm_tcpconnect if the asynchronous
connect operation finishes with all the callbacks before we exit the
isc__nm_tcpconnect itself we might access an already freed memory.
Fix it by creating an additional reference to the socket freed at the
end of isc__nm_tcpconnect.
When we're coming back from recursion fetch_callback does not accept
DNS_R_NXDOMAIN as an rcode - query_gotanswer calls query_nxdomain in
which an assertion fails on qctx->is_zone. Yet, under some
circumstances, qname minimization will return an DNS_R_NXDOMAIN - when
root zone mirror is not yet loaded. The fix changes the DNS_R_NXDOMAIN
answer to DNS_R_SERVFAIL.
the blackhole ACL was accidentally disabled with respect to client
queries during the netmgr conversion.
in order to make this work for TCP, it was necessary to add a return
code to the accept callback functions passed to isc_nm_listentcp() and
isc_nm_listentcpdns().
Implement the 'rndc dnssec -status' command that will output
some information about the key states, such as which policy is
used for the zone, what keys are in use, and when rollover is
scheduled.
Add loose testing in the kasp system test, the actual times are
already tested via key file inspection.
I'd like to use the same functionality (pretty print the datetime
of keytime metadata) in the 'rndc dnssec -status' command. So it is
better that this logic is done in a separate function.
Since the stdtime.c code have differernt files for unix and win32,
I think the "#ifdef WIN32" define can be dropped.
The wait until zones are signed after rndc reconfig is broken
because the zones are already signed before the reconfig. Fix
by having a different way to ensure the signing of the zone is
complete. This does require a call to the "wait_for_done_signing"
function after each "check_keys" call after the ns6 reconfig.
The "wait_for_done_signing" looks for a (newly added) debug log
message that named will output if it is done signing with a certain
key.
isc__nm_tcpdns_send() was not asynchronous and accessed socket
internal fields in an unsafe manner, which could lead to a race
condition and subsequent crash. Fix it by moving tcpdns processing
to a proper netmgr thread.
We need to mark the socket as inactive early (and synchronously)
in the stoplistening process; otherwise we might destroy the
callback argument before we actually stop listening, and call
the callback on bad memory.
Assign and then check node for NULL to address another thread
changing radix->head in the meantime.
Move 'node != NULL' check into while loop test to silence cppcheck
false positive.
Fix pointer != NULL style.
The `rndc` argument was always overridden by the static configuration,
because the logic for handling the number of dnstap files to retain
was both backwards and a bit redundant.
these keywords were added to the parser as synonyms for "master"
and "slave" but were never hooked in to the configuration of named,
so they were ignored. this has been fixed and the option is now
checked for correctness.
The isc_nm_cancelread() function cancels reading on a connected
socket and calls its read callback function with a 'result'
parameter of ISC_R_CANCELED.
when isc_nm_destroy() is called, there's a loop that waits for
other references to be detached, pausing and unpausing the netmgr
to ensure that all the workers' events are run, followed by a
1-second sleep. this caused a delay on shutdown which will be
noticeable when netmgr is used in tools other than named itself,
so the delay has now been reduced to a hundredth of a second.
the isc_nm_tcpconnect() function establishes a client connection via
TCP. once the connection is esablished, a callback function will be
called with a newly created network manager handle.
