C11 has builtin support for _Noreturn function specifier with
convenience noreturn macro defined in <stdnoreturn.h> header.
Replace ISC_NORETURN macro by C11 noreturn with fallback to
__attribute__((noreturn)) if the C11 support is not complete.
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
Replace :manpage: with :iscman: to generate internal hyperlinks. That
way reader can use links even when offline, and jumps to man pages
for the same version.
Formerly HTML version of man pages did not have links in See Also
section because :manpage: role in Sphinx can generate only external
hyperlinks - and we do not have that enabled.
Enabling the Sphinx :manpage: linking could reliably create hyperlinks
only to external URLs, but that would take users to another version
of docs.
Generated by:
find bin -name '*.rst' | xargs sed -i -e 's/:manpage:`\([^(]\+\)(\([0-9]\))`/:iscman:`\1(\2) <\1>`/g'
+ hand-edit to revert change for mmencode reference which is
not provided in our source tree.
Use the new role :iscman: to replace all occurences or ``binary``
with :iscman:`binary`, creating a hyperlink to the manual page.
Generated using:
find bin -name *.rst | xargs fgrep --files-with-matches '.. iscman' | xargs -I{} -n1 basename {} .rst > /tmp/progs
for PROG in $(cat /tmp/progs); do find -name '*.rst' | xargs sed -i -e "s/\`\`$PROG\`\`/:iscman:\`$PROG\`/g"; done
Additional hand-edits were done mainly around filter-aaaa and
filter-a which are program names and and option names at the
same time. Couple more edits was neede to fix .rst syntax broken by
automatic replacement.
Sphinx has it's own :program: syntax for refering to program names.
Use it for self-references in manual pages. These self-references are
not clickable and not as eye-cathing as links, which is a good thing.
There is no point in attracting attention to ``dig`` several times on a
single page dedicated to dig itself.
Substituted automatically using:
find bin -name *.rst | xargs fgrep --files-with-matches '.. program' | xargs -n1 bash /tmp/repl.sh
With /tmp/repl.sh being:
BASE=$(basename "$1" .rst)
sed -i -e "s/\`\`$BASE\`\`/:program:\`$BASE\`/g" "$1"
The new directive and role "iscman" allow to tag & reference man pages in
our source tree. Essentially it is just namespacing for ISC man pages,
but it comes with couple benefits.
Differences from .. _man_program label we formerly used:
- Does not expand :ref:`man_program` into full text of the page header.
- Generates index entry with category "manual page".
- Rendering style is closer to ubiquitous to the one produced
by ``named`` syntax.
Differences from Sphinx built-in :manpage: role:
- Supports all builders with support for cross-references.
- Generates internal links (unlike :manpage: which generates external
URLs).
- Checks that target exists withing our source tree.
Side-effect of hyperlinking is that typos in program and option names
are now detected by Sphinx.
Candidate -options were detected using:
find -name *.rst | xargs grep '``-[^`]'
and then modified from ``-o`` to :option:`-o` using regex
s/``\(-[^`]\+\)``/:option:`\1`/
+ manual modifications where necessary.
Non-hyphenated options were detected by looking at context around
program names:
find bin -name *.rst | xargs -I{} -n1 basename {} .rst | sort -u
and grepping for program name with trailing whitespace.
Stand-alone program names like ``named`` are not hyperlinked in this
commit.
The markup allows referencing individual options, and also makes them
more legible (no more thin red text on gray background).
Most of the work was done using regexes:
s/^``-\(.*\)``$/.. option:: -\1\r/
s/^``+\(.*\)``$/.. option:: +\1\r/
on bin/**/*.rst files along with visual inspection and hand-edits,
mostly for positional arguments.
Regex for rndc.rst:
s/^``\(.*\)``/.. option:: \1\r/
+ hand edits to remove extra asterisk and whitespace here and there.
Both utilities were included as one man page, but this caused a problem:
Sphinx directive .. include was used twice on the same file, which
prevented us from using labels (or anything with unique identifier) in
the man pages. This effectivelly prevented linking to them.
Splitting man pages allows us to solve the linking problems and also
clearly make text easier to follow because it does not mention two tools
at the same time.
This change causes duplication of text, but given the frequecy of changes
to these tools I think it is acceptable.
Related: #2799
Replace the hard-coded paths for various BIND 9 files (configuration,
pid, etc.) in the man pages and ARM with compile-time values using the
sphinx-build replace system.
This is more complicated, because the restructured text specification
doesn't allow |substitions| inside ``code-blocks``, so for each specific
file we had to create own substition which is sub-optimal, but it is
only way how to do this without adding Sphinx extension.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Unify the header guard style and replace the inconsistent include guards
with #pragma once.
The #pragma once is widely and very well supported in all compilers that
BIND 9 supports, and #pragma once was already in use in several new or
refactored headers.
Using simpler method will also allow us to automate header guard checks
as this is simpler to programatically check.
For reference, here are the reasons for the change taken from
Wikipedia[1]:
> In the C and C++ programming languages, #pragma once is a non-standard
> but widely supported preprocessor directive designed to cause the
> current source file to be included only once in a single compilation.
>
> Thus, #pragma once serves the same purpose as include guards, but with
> several advantages, including: less code, avoidance of name clashes,
> and sometimes improvement in compilation speed. On the other hand,
> #pragma once is not necessarily available in all compilers and its
> implementation is tricky and might not always be reliable.
1. https://en.wikipedia.org/wiki/Pragma_once
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
The native PKCS#11 support has been removed in favour of better
maintained, more performance and easier to use OpenSSL PKCS#11 engine
from the OpenSC project.
The isc/platform.h header was left empty which things either already
moved to config.h or to appropriate headers. This is just the final
cleanup commit.
The Makefile.tests was modifying global AM_CFLAGS and LDADD and could
accidentally pull /usr/include to be listed before the internal
libraries, which is known to cause problems if the headers from the
previous version of BIND 9 has been installed on the build machine.
The Windows support has been completely removed from the source tree
and BIND 9 now no longer supports native compilation on Windows.
We might consider reviewing mingw-w64 port if contributed by external
party, but no development efforts will be put into making BIND 9 compile
and run on Windows again.
Both doc/man/ddns-confgen.rst and doc/man/tsig-keygen.rst include
bin/confgen/tsig-keygen.rst, which defines a "man_tsig-keygen" label.
This triggers the following warning when running sphinx-build with the
-W command line switch in the doc/man/ directory:
../../bin/confgen/tsig-keygen.rst:27: WARNING: duplicate label man_tsig-keygen, other instance in /tmp/bind9/doc/man/ddns-confgen.rst
Move the offending label from bin/confgen/tsig-keygen.rst to the proper
spot in doc/arm/manpages.rst to avoid effectively defining it twice in
different source documents while still allowing the relevant man page to
be referenced in the ARM. Also rename that label so that it more
closely matches the content it points to. As the label no longer
immediately precedes a section title in its new location, use
:ref:`Title <label>` syntax for the only reference to the
tsig-keygen/ddns-confgen man page in the ARM.
This commit extends the perl Configure script to also check for libssl
in addition to libcrypto and change the vcxproj source files to link
with both libcrypto and libssl.
Move BIND binaries which are neither daemons nor administrative programs
to $bindir. This results in only the following binaries being left in
$sbindir:
- ddns-confgen
- named
- rndc
- rndc-confgen
- tsig-confgen
The ARM and the manpages have been converted into Sphinx documentation
format.
Sphinx uses reStructuredText as its markup language, and many of its
strengths come from the power and straightforwardness of
reStructuredText and its parsing and translating suite, the Docutils.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
All our MSVS Project files share the same intermediate directory. We
know that this doesn't cause any problems, so we can just disable the
detection in the project files.
Example of the warning:
warning MSB8028: The intermediate directory (.\Release\) contains files shared from another project (dnssectool.vcxproj). This can lead to incorrect clean and rebuild behavior.
Our vcxproj files set the WarningLevel to Level3, which is too verbose
for a code that needs to be portable. That basically leads to ignoring
all the errors that MSVC produces. This commits downgrades the
WarningLevel to Level1 and enables treating warnings as errors for
Release builds. For the Debug builds the WarningLevel got upgraded to
Level4, and treating warnings as errors is explicitly disabled.
We should eventually make the code clean of all MSVC warnings, but it's
a long way to go for Level4, so it's more reasonable to start at Level1.
For reference[1], these are the warning levels as described by MSVC
documentation:
* /W0 suppresses all warnings. It's equivalent to /w.
* /W1 displays level 1 (severe) warnings. /W1 is the default setting
in the command-line compiler.
* /W2 displays level 1 and level 2 (significant) warnings.
* /W3 displays level 1, level 2, and level 3 (production quality)
warnings. /W3 is the default setting in the IDE.
* /W4 displays level 1, level 2, and level 3 warnings, and all level 4
(informational) warnings that aren't off by default. We recommend
that you use this option to provide lint-like warnings. For a new
project, it may be best to use /W4 in all compilations. This option
helps ensure the fewest possible hard-to-find code defects.
* /Wall displays all warnings displayed by /W4 and all other warnings
that /W4 doesn't include — for example, warnings that are off by
default.
* /WX treats all compiler warnings as errors. For a new project, it
may be best to use /WX in all compilations; resolving all warnings
ensures the fewest possible hard-to-find code defects.
1. https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level?view=vs-2019
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
Until now, the build process for BIND on Windows involved upgrading the
solution file to the version of Visual Studio used on the build host.
Unfortunately, the executable used for that (devenv.exe) is not part of
Visual Studio Build Tools and thus there is no clean way to make that
executable part of a Windows Server container.
Luckily, the solution upgrade process boils down to just adding XML tags
to Visual Studio project files and modifying certain XML attributes - in
files which we pregenerate anyway using win32utils/Configure. Thus,
extend win32utils/Configure with three new command line parameters that
enable it to mimic what "devenv.exe bind9.sln /upgrade" does. This
makes the devenv.exe build step redundant and thus facilitates building
BIND in Windows Server containers.
- "--with-geoip" is used to enable the legacy GeoIP library.
- "--with-geoip2" is used to enable the new GeoIP2 library
(libmaxminddb), and is on by default if the library is found.
- using both "--with-geoip" and "--with-geoip2" at the same time
is an error.
- an attempt is made to determine the default GeoIP2 database path at
compile time if pkg-config is able to report the module prefix. if
this fails, it will be necessary to set the path in named.conf with
geoip-directory
- Makefiles have been updated, and a stub lib/dns/geoip2.c has been
added for the eventual GeoIP2 search implementation.
