The configure_catz() function creates the catalog zones structure
for the view even when it is not needed, in which case it then
discards it (by detaching) later.
Instead, call dns_catz_new_zones() only when it is needed, i.e. when
there is no existing "previous" view with an existing 'catzs', that
is going to be reused.
* Change 'dns_catz_new_zones()' function's prototype (the order of the
arguments) to synchronize it with the similar function in rpz.c.
* Rename 'refs' to 'references' in preparation of ISC_REFCOUNT_*
macros usage for reference tracking.
* Unify dns_catz_zone_t naming to catz, and dns_catz_zones_t naming to
catzs, following the logic of similar changes in rpz.c.
* Use C compound literals for structure initialization.
* Synchronize the "new zone version came too soon" log message with the
one in rpz.c.
* Use more of 'sizeof(*ptr)' style instead of the 'sizeof(type_t)' style
expressions when allocating or freeing memory for 'ptr'.
the 'dispatchmgr' member of the resolver object is used by both
the dns_resolver and dns_request modules, and may in the future
be used by others such as dns_xfrin. it doesn't make sense for it
to live in the resolver object; this commit moves it into dns_view.
When switching to a new view during a reconfiguration (or reverting
to the old view), detach the 'rpzs' and 'catzs' from the previuos view.
The 'catzs' case was earlier solved slightly differently, by detaching
from the new view when reverting to the old view, but we can not solve
this the same way for 'rpzs', because now in BIND 9.19 and BIND 9.18
a dns_rpz_shutdown_rpzs() call was added in view's destroy() function
before detaching the 'rpzs', so we can not leave the 'rpzs' attached to
the previous view and let it be shut down when we intend to continue
using it with the new view.
Instead, "re-fix" the issue for the 'catzs' pointer the same way as
for 'rpzs' for consistency, and also because a similar shutdown call
is likely to be implemented for 'catzs' in the near future.
this function was just a front-end for gethostname(). it was
needed when we supported windows, which has a different function
for looking up the hostname; it's not needed any longer.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
change functions using isc_taskmgr_beginexclusive() to use
isc_loopmgr_pause() instead.
also, removed an unnecessary use of exclusive mode in
named_server_tcptimeouts().
most functions that were implemented as task events because they needed
to be running in a task to use exclusive mode have now been changed
into loop callbacks instead. (the exception is catz, which is being
changed in a separate commit because it's a particularly complex change.)
callback events from dns_resolver_createfetch() are now posted
using isc_async_run.
other modules which called the resolver and maintained task/taskmgr
objects for this purpose have been cleaned up.
the built-in trust anchors in named and delv are sufficent for
validation. named still needs to be able to load trust anchors from
a bind.keys file for testing purposes, but it doesn't need to be
the default behavior.
we now only load trust anchors from a file if explicitly specified
via the "bindkeys-file" option in named or the "-a" command line
argument to delv. documentation has been cleaned up to remove references
to /etc/bind.keys.
Closes#3850.
it was possible for a managed trust anchor needing to send a key
refresh query to be unable to do so because an authoritative zone
was not yet loaded. this has been corrected by delaying the
synchronization of managed-keys zones until after all zones are
loaded.
Commit b69e783164 changed the scope of the
local 'view' variable in load_configuration(), but the code section
guarded by the #ifdef USE_DNSRPS directive was not adjusted accordingly,
causing build errors for DNSRPS-enabled builds. Fix the latter by
declaring the 'view' variable inside the loop in the DNSRPS-specific
block of code.
Add support for loading and validating the 'tls' parameter from
the forwarders' configuration.
This prepares ground for adding support to forward queries to
DoT-enabled upstream servers.
named formerly reserved a set of dispatch objects for use when
sending requests from user-specified source ports. this objects
are no longer used and have been removed.
When we change the view in the view->managed_keys, we never commit the
change, keeping the previous view possibly attached forever.
Call the dns_zone_setviewcommit() immediately after changing the view as
we are detaching the previous view anyway and there's no way to recover
from that.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
This bug was masked in the tests because the `catz` test script did an
`rndc addzone` before an `rndc delzone`. The `addzone` autovivified
the NZF config, so `delzone` worked OK.
This commit swaps the order of two sections of the `catz` test script
so that it uses `delzone` before `addzone`, which provokes a crash
when `delzone` requires a non-NULL NZF config.
To fix the crash, we now try to remove the zone from the NZF config
only if it was dynamically added but not by a catalog zone.
Additionally to renaming, it changes the function definition so that
it accepts a pointer to pointer instead of returning a pointer to the
new object.
It is mostly done to make it in line with other functions in the
module.
The isc_buffer_reserve() would be passed a reference to the buffer
pointer, which was unnecessary as the pointer would never be changed
in the current implementation. Remove the extra dereference.
The only function left in the isc_resource API was setting the file
limit. Replace the whole unit with a simple getrlimit to check the
maximum value of RLIMIT_NOFILE and set the maximum back to rlimit_cur.
This is more compatible than trying to set RLIMIT_UNLIMITED on the
RLIMIT_NOFILE as it doesn't work on Linux (see man 5 proc on
/proc/sys/fs/nr_open), neither it does on Darwin kernel (see man 2
getrlimit).
The only place where the maximum value could be raised under privileged
user would be BSDs, but the `named_os_adjustnofile()` were not called
there before. We would apply the increased limits only on Linux and Sun
platforms.
After deprecating the operating system limits settings (coresize,
datasize, files and stacksize), mark them as ancient and remove the code
that sets the values from config.
The mechanism for associating a worker task to a database now
uses loops rather than tasks.
For this reason, the parameters to dns_cache_create() have been
updated to take a loop manager rather than a task manager.
The dns_rpz_zones structure was using .refs and .irefs for strong and
weak reference counting. Rewrite the unit to use just a single
reference counting + shutdown sequence (dns_rpz_destroy_rpzs) that must
be called by the creator of the dns_rpz_zones_t object. Remove the
reference counting from the dns_rpz_zone structure as it is not needed
because the zone objects are fully embedded into the dns_rpz_zones
structure and dns_rpz_zones_t object must never be destroyed before all
dns_rpz_zone_t objects.
The dns_rps_zones_t reference counting uses the new ISC_REFCOUNT_TRACE
capability - enable by defining DNS_RPZ_TRACE in the dns/rpz.h header.
Additionally, add magic numbers to the dns_rpz_zone and dns_rpz_zones
structures.
The dns_cache API contained a cache cleaning mechanism that would be
disabled for 'rbt' based cache. As named doesn't have any other cache
implementations, remove the cache cleaning mechanism from dns_cache API.
There were a number of places where the zone table should have been
locked, but wasn't, when dns_zt_apply was called.
Added a isc_rwlocktype_t type parameter to dns_zt_apply and adjusted
all calls to using it. Removed locks in callers.
If after a reconfig a zone is not reusable because inline-signing
was turned on/off, trigger a full resign. This is necessary because
otherwise the zone maintenance may decide to only apply the changes
in the journal, leaving the zone in an inconsistent DNSSEC state.
The ns_interfacemgr_scan() now requires the loopmgr to be running, so we
need to end exclusive mode for the rescan and then begin it again.
This is relatively safe operation (because the scan happens on the timer
anyway), but we need to ensure that we won't load the configuration from
different threads. This is already the case because the initial load
happens on the main thread and the control channel also listens just on
the main loop.
The "prefetch" setting is in "defaultconf" so it cannot fail, use
INSIST to confirm that.
The 'trigger' and 'eligible' variables are now prefixed with
'prefetch_' and their declaration moved to an upper level, because
there is no more additional code block after this change.
Mostly generated automatically with the following semantic patch,
except where coccinelle was confused by #ifdef in lib/isc/net.c
@@ expression list args; @@
- UNEXPECTED_ERROR(__FILE__, __LINE__, args)
+ UNEXPECTED_ERROR(args)
@@ expression list args; @@
- FATAL_ERROR(__FILE__, __LINE__, args)
+ FATAL_ERROR(args)
Getting the recorded value of 'edns-udp-size' from the resolver requires
strong attach to the dns_view because we are accessing `view->resolver`.
This is not the case in places (f.e. dns_zone unit) where `.udpsize` is
accessed. By moving the .udpsize field from `struct dns_resolver` to
`struct dns_view`, we can access the value directly even with weakly
attached dns_view without the need to lock the view because `.udpsize`
can be accessed after the dns_view object has been shut down.
Because the dns_zonemgr_create() was run before the loopmgr was started,
the isc_ratelimiter API was more complicated that it had to be. Move
the dns_zonemgr_create() to run_server() task which is run on the main
loop, and simplify the isc_ratelimiter API implementation.
The isc_timer is now created in the isc_ratelimiter_create() and
starting the timer is now separate async task as is destroying the timer
in case it's not launched from the loop it was created on. The
ratelimiter tick now doesn't have to create and destroy timer logic and
just stops the timer when there's no more work to do.
This should also solve all the races that were causing the
isc_ratelimiter to be left dangling because the timer was stopped before
the last reference would be detached.
sd_notify() may be called by a service to notify the service manager
about state changes. It can be used to send arbitrary information,
encoded in an environment-block-like string. Most importantly, it can be
used for start-up completion notification.
Add libsystemd check to autoconf script and when the library is detected
add calls to sd_notify() around the server->reload_status changes.
Co-authored-by: Petr Špaček <pspacek@isc.org>
There was a ubsan error reporting an invalid value for interface_auto
(a boolean value cannot be 190) because it was not initialized. To
avoid this problem happening again, ensure the whole of the server
structure is initialized to zero before setting the (relatively few)
non-zero elements.
There is an omission of assigning the return value coming from the
isc_portset_create() function to the result variable.
CID 356328:
/bin/named/server.c: 8756 in load_configuration()
8750 "creating UDP/IPv4 port set: %s",
8751 isc_result_totext(result));
8752 goto cleanup_bindkeys_parser;
8753 }
8754 isc_portset_create(named_g_mctx, &v6portset);
8755 if (result != ISC_R_SUCCESS) {
>>> CID 356328: Control flow issues (DEADCODE)
>>> Execution cannot reach this statement: "isc_log_write(named_g_lctx,...".
8756 isc_log_write(named_g_lctx, NAMED_LOGCATEGORY_GENERAL,
8757 NAMED_LOGMODULE_SERVER, ISC_LOG_ERROR,
8758 "creating UDP/IPv6 port set: %s",
8759 isc_result_totext(result));
8760 goto cleanup_v4portset;
8761 }
