as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
When the resolver was refactored, the statistics system test had to be
adjusted in c6b4d82557. Unfortunately,
this change had to be done because of an error in the resolver
refactoring where timeout would not retry next server, but keep trying
the same server. As we have now fixed this bug, revert the change to
the test back to the previous state.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
The statistics system test makes a query to foo.info to check for the
pending connections because the ans4 doesn't respond to the query.
This might or might not (depending on exact timing) increment the failed
TCP connection counter when the query is retried over TCP because ans4
doesn't listen on the TCP.
Wait for the 'connection refused' in the ns3 log file to be able to
count the exactly 1 failed TCP connection.
The statistics system test fails on Oracle Linux 7 when libxml2, Curl,
and xsltproc are present:
I:statistics:checking bind9.xsl vs xml (17)
diff: curl.out.17.xsl: No such file or directory
tests.sh: line 183: curl.out.17.xml: No such file or directory
cp: cannot stat 'curl.out.17.xml': No such file or directory
grep: xsltproc.out.17: No such file or directory
This is because the Oracle Linux 7 Curl does not know about the
--http1.1 option and silently fails with:
+ /usr/bin/curl --http1.1 http://10.53.0.3:7252
curl: option --http1.1: is unknown
curl: try 'curl --help' or 'curl --manual' for more information
The following test "checking bind9.xml socket statistics" then needs to
check for existence of stats.xml.out file which is artifact of the
previous test.
- Removed all code that only runs under CYGWIN, and made all
code that doesn't run under CYGWIN non-optional.
- Removed the $TP variable which was used to add optional
trailing dots to filenames; they're no longer optional.
- Removed references to pssuspend and dos2unix.
- No need to use environment variables for diff and kill.
- Removed uses of "tr -d '\r'"; this was a workaround for
a cygwin regex bug that is no longer needed.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Check to see whether there are outstanding requests in the
httpd receive buffer after sending the response, and if so,
process them.
Test that pipelined requests are handled by sending multiple
minimal HTTP/1.1 using netcat (nc) and checking that we get
back the same number of responses.
The statistics system test sometimes needs a pause to wait for the
expected stats to be reported.
Also, the test for priming queries was ineffective; the result of
the grep was not being checked.
- serve-stale: dig wasn't always running in background when it should.
some of the serve-stale test cases are based on groups of dig calls
running simultaneously in the background: the test pauses and resumes
running after 'wait'. in some cases the final call to dig in a group
wasn't in the background, and this sometimes caused delays that
affected later test results. in another case, a test was simplified
and made more reliable by running dig in the foreground removing a
sleep.
- serve-stale: The extension of the dig timeout period from 10 to 11
seconds in commit 5307bf64ce was left undone in a few places and has
now been completed.
- serve-stale: Resolver-query-timeout was set incorrectly. a comment
above a test case in serve-stale/tests.sh says: "We configured a long
value of 30 seconds for resolver-query-timeout," but
resolver-query-timeout was actually set to 10, not 30. this is now
fixed.
- rpz: Force retransfer of the fast-expire zone, to ensure it's fully
loaded in ns3; previously it could have been left unloaded if ns5
wasn't up yet when ns3 attempted the zone transfer.
- statistics: The TCP4SendErr counter is incremented when a TCP dispatch
is canceled while sending. depending on test timing, this may have
happened by the time the statistics are dumped. worked around by
ignoring that stat couunter when checking for errors.
- hooks: Add a prereq.sh script to prevent running under TSAN.
- zero: Disabled the servfail cache so that SERVFAIL is reported only
when there actually is a failure, not repeatedly every time the same
query is sent.
When networking statistics was added to the netmgr (in commit
5234a8e00a), two lines were added that
increment the 'STATID_RECVFAIL' statistic: One if 'uv_read_start'
fails and one at the end of the 'read_cb'. The latter happens
if 'nread < 0'.
According to the libuv documentation, I/O read callbacks (such as for
files and sockets) are passed a parameter 'nread'. If 'nread' is less
than 0, there was an error and 'UV_EOF' is the end of file error, which
you may want to handle differently.
In other words, we should not treat EOF as a RECVFAIL error.
No issues with the glue cache feature have been reported since its
introduction in BIND 9.12. As the rationale for introducing the
"glue-cache" option was to have a safety switch readily available in
case the glue cache turns out to cause problems, it is time to deprecate
the option. Glue cache will be permanently enabled in a future release,
at which point the "glue-cache" option will be made obsolete.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
With the netmgr in use, named may start answering queries before zones
are loaded. This can cause transient failures in system tests after
servers are restarted or reconfigured. This commit adds retry loops
and sleep statements where needed to address this problem.
Also incidentally silenced a clang warning.
Every prereq.sh script must include bin/tests/system/conf.sh, otherwise
if some prerequisite is not met, errors about echo_i not being found
will be printed instead of actual error messages.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
