The dns_dispatchmgr object was only set in the dns_view object making it
prone to use-after-free in the dns_xfrin unit when shutting down named.
Remove dns_view_setdispatchmgr() and optionally pass the dispatchmgr
directly to dns_view_create() when it is attached and not just assigned,
so the dns_dispatchmgr doesn't cease to exist too early.
The dns_view_getdnsdispatchmgr() is now protected by the RCU lock, the
dispatchmgr reference is incremented, so the caller needs to detach from
it, and the function can return NULL in case the dns_view has been
already shut down.
When dns_request was canceled via dns_requestmgr_shutdown() the cancel
event would be propagated on different loop (loop 0) than the loop where
request was created on. In turn this would propagate down to isc_netmgr
where we require all the events to be called from the matching isc_loop.
Pin the dns_requests to the loops and ensure that all the events are
called on the associated loop. This in turn allows us to remove the
hashed locks on the requests and change the single .requests list to be
a per-loop list for the request accounting.
Additionally, do some extra cleanup because some race condititions are
now not possible as all events on the dns_request are serialized.
This change makes the zone table lock-free for reads. Previously, the
zone table used a red-black tree, which is not thread safe, so the hot
read path acquired both the per-view mutex and the per-zonetable
rwlock. (The double locking was to fix to cleanup races on shutdown.)
One visible difference is that zones are not necessarily shut down
promptly: it depends on when the qp-trie garbage collector cleans up
the zone table. The `catz` system test checks several times that zones
have been deleted; the test now checks for zones to be removed from
the server configuration, instead of being fully shut down. The catz
test does not churn through enough zones to trigger a gc, so the zones
are not fully detached until the server exits.
After this change, it is still possible to improve the way we handle
changes to the zone table, for instance, batching changes, or better
compaction heuristics.
When fatal is called we may be holding memory allocated by OpenSSL.
This may result in the reference count for the FIPS provider not
going to zero and the shared library not being unloaded during
OPENSSL_cleanup. When the shared library is ultimately unloaded,
when all remaining dynamically loaded libraries are freed, we have
already destroyed the memory context we where using to track memory
leaks / late frees resulting in INSIST being called.
Disable triggering the INSIST when fatal has being called.
The isc_time_now() and isc_time_now_hires() were used inconsistently
through the code - either with status check, or without status check,
or via TIME_NOW() macro with RUNTIME_CHECK() on failure.
Refactor the isc_time_now() and isc_time_now_hires() to always fail when
getting current time has failed, and return the isc_time_t value as
return value instead of passing the pointer to result in the argument.
the 'dispatchmgr' member of the resolver object is used by both
the dns_resolver and dns_request modules, and may in the future
be used by others such as dns_xfrin. it doesn't make sense for it
to live in the resolver object; this commit moves it into dns_view.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
dns_request_create() and _createraw() now take a 'loop' parameter
and run the callback event on the specified loop.
as the task manager is no longer used, it has been removed from
the dns_requestmgr structure. the dns_resolver_taskmgr() function
is also no longer used and has been removed.
It is trivial to fully cleanup memory on all the error paths in
named-rrchecker, many of which are triggered by bad user input.
This involves freeing lex and mctx if they exist when fatal is
called.
* rbt node chains were sized to allow for bitstring labels, so they
had 256 levels; but in the absence of bistrings, 128 is enough.
* dns_byaddr_createptrname() had a redundant options argument,
and a very outdated doc comment.
* A number of comments referred to bitstring labels in a way that is
no longer helpful. (A few informative comments remain.)
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
The isc_buffer_reserve() would be passed a reference to the buffer
pointer, which was unnecessary as the pointer would never be changed
in the current implementation. Remove the extra dereference.
The various factors like NS_PER_MS are now defined in a single place
and the names are no longer inconsistent. I chose the _PER_SEC names
rather than _PER_S because it is slightly more clear in isolation;
but the smaller units are always NS, US, and MS.
This change prepares ground for sending DNS requests using DoT,
which, in particular, will be used for forwarding dynamic updates
to TLS-enabled primaries.
dns_request_create() was a front-end to dns_request_createvia() that
was only used by test binaries. dns_request_createvia() has been
renamed to dns_request_create(), and the test programs that formerly
used dns_request_create() have been updated to use the new parameters.
YAML strings should be quoted if they contain colon characters.
Since IPv6 addresses do, we now quote the query_address and
response_address strings in all YAML output.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
* isc_timer was rewritten using the uv_timer, and isc_timermgr_t was
completely removed; isc_timer objects are now directly created on the
isc_loop event loops.
* the isc_timer API has been simplified. the "inactive" timer type has
been removed; timers are now stopped by calling isc_timer_stop()
instead of resetting to inactive.
* isc_manager now creates a loop manager rather than a timer manager.
* modules and applications using isc_timer have been updated to use the
new API.
It's wasteful to use 20 bytes and a pointer indirection to represent
two bits of information, so turn the struct into an enum. And change
the names of the enumeration constants to make the intent more clear.
This change introduces some inline functions into another header,
which confuses `gcovr` when it is trying to collect code coverage
statistics. So, in the CI job, copy more header files into a directory
where `gcovr` looks for them.
There was a proposal in the late 1990s that it might, but it turned
out to be unworkable. See RFC 6891, Extension Mechanisms for
DNS (EDNS(0)), section 5, Extended Label Types.
The remnants of the code that supported this in BIND are redundant.
Previously, tasks could be created either unbound or bound to a specific
thread (worker loop). The unbound tasks would be assigned to a random
thread every time isc_task_send() was called. Because there's no logic
that would assign the task to the least busy worker, this just creates
unpredictability. Instead of random assignment, bind all the previously
unbound tasks to worker 0, which is guaranteed to exist.
The dns_message_gettempname(), dns_message_gettemprdata(),
dns_message_gettemprdataset(), and dns_message_gettemprdatalist() always
succeeds because the memory allocation cannot fail now. Change the API
to return void and cleanup all the use of aforementioned functions.
After removing the isc_task_onshutdown(), the isc_task_shutdown() and
isc_task_destroy() became obsolete.
Remove calls to isc_task_shutdown() and replace the calls to
isc_task_destroy() with isc_task_detach().
Simplify the internal logic to destroy the task when the last reference
is removed.
Man pages for dig/mdig/delv used `.. option:: +[no]bla` to describe two
options at once, and very old Sphinx does not support that [] in option
names.
Solution is to split negative and positive options into `+bla, +nobla`
form. In the end it improves readability because it transforms hard to
read strings with double brackets from
`+[no]subnet=addr[/prefix-length]` to
`+subnet=addr[/prefix-length], +nosubnet`.
As a side-effect it also allows easier linking to dig/mdig/delv options
using their name directly instead of always overriding the link target
to `+[no]bla` form.
Transformation was done using regex:
s/:: +\[no\]\(.*\)/:: +\1, +no\1
... and manual review around occurences matching regex
+no.*=
Fixes: #3301
There are a couple of problems with dns_request_createvia(): a UDP
retry count of zero means unlimited retries (it should mean no
retries), and the overall request timeout is not enforced. The
combination of these bugs means that requests can be retried forever.
This change alters calls to dns_request_createvia() to avoid the
infinite retry bug by providing an explicit retry count. Previously,
the calls specified infinite retries and relied on the limit implied
by the overall request timeout and the UDP timeout (which did not work
because the overall timeout is not enforced). The `udpretries`
argument is also changed to be the number of retries; previously, zero
was interpreted as infinity because of an underflow to UINT_MAX, which
appeared to be a mistake. And `mdig` is updated to match the change in
retry accounting.
The bug could be triggered by zone maintenance queries, including
NOTIFY messages, DS parental checks, refresh SOA queries and stub zone
nameserver lookups. It could also occur with `nsupdate -r 0`.
(But `mdig` had its own code to avoid the bug.)
C11 has builtin support for _Noreturn function specifier with
convenience noreturn macro defined in <stdnoreturn.h> header.
Replace ISC_NORETURN macro by C11 noreturn with fallback to
__attribute__((noreturn)) if the C11 support is not complete.
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
Replace :manpage: with :iscman: to generate internal hyperlinks. That
way reader can use links even when offline, and jumps to man pages
for the same version.
Formerly HTML version of man pages did not have links in See Also
section because :manpage: role in Sphinx can generate only external
hyperlinks - and we do not have that enabled.
Enabling the Sphinx :manpage: linking could reliably create hyperlinks
only to external URLs, but that would take users to another version
of docs.
Generated by:
find bin -name '*.rst' | xargs sed -i -e 's/:manpage:`\([^(]\+\)(\([0-9]\))`/:iscman:`\1(\2) <\1>`/g'
+ hand-edit to revert change for mmencode reference which is
not provided in our source tree.
Use the new role :iscman: to replace all occurences or ``binary``
with :iscman:`binary`, creating a hyperlink to the manual page.
Generated using:
find bin -name *.rst | xargs fgrep --files-with-matches '.. iscman' | xargs -I{} -n1 basename {} .rst > /tmp/progs
for PROG in $(cat /tmp/progs); do find -name '*.rst' | xargs sed -i -e "s/\`\`$PROG\`\`/:iscman:\`$PROG\`/g"; done
Additional hand-edits were done mainly around filter-aaaa and
filter-a which are program names and and option names at the
same time. Couple more edits was neede to fix .rst syntax broken by
automatic replacement.
Sphinx has it's own :program: syntax for refering to program names.
Use it for self-references in manual pages. These self-references are
not clickable and not as eye-cathing as links, which is a good thing.
There is no point in attracting attention to ``dig`` several times on a
single page dedicated to dig itself.
Substituted automatically using:
find bin -name *.rst | xargs fgrep --files-with-matches '.. program' | xargs -n1 bash /tmp/repl.sh
With /tmp/repl.sh being:
BASE=$(basename "$1" .rst)
sed -i -e "s/\`\`$BASE\`\`/:program:\`$BASE\`/g" "$1"
The new directive and role "iscman" allow to tag & reference man pages in
our source tree. Essentially it is just namespacing for ISC man pages,
but it comes with couple benefits.
Differences from .. _man_program label we formerly used:
- Does not expand :ref:`man_program` into full text of the page header.
- Generates index entry with category "manual page".
- Rendering style is closer to ubiquitous to the one produced
by ``named`` syntax.
Differences from Sphinx built-in :manpage: role:
- Supports all builders with support for cross-references.
- Generates internal links (unlike :manpage: which generates external
URLs).
- Checks that target exists withing our source tree.
Side-effect of hyperlinking is that typos in program and option names
are now detected by Sphinx.
Candidate -options were detected using:
find -name *.rst | xargs grep '``-[^`]'
and then modified from ``-o`` to :option:`-o` using regex
s/``\(-[^`]\+\)``/:option:`\1`/
+ manual modifications where necessary.
Non-hyphenated options were detected by looking at context around
program names:
find bin -name *.rst | xargs -I{} -n1 basename {} .rst | sort -u
and grepping for program name with trailing whitespace.
Stand-alone program names like ``named`` are not hyperlinked in this
commit.
The markup allows referencing individual options, and also makes them
more legible (no more thin red text on gray background).
Most of the work was done using regexes:
s/^``-\(.*\)``$/.. option:: -\1\r/
s/^``+\(.*\)``$/.. option:: +\1\r/
on bin/**/*.rst files along with visual inspection and hand-edits,
mostly for positional arguments.
Regex for rndc.rst:
s/^``\(.*\)``/.. option:: \1\r/
+ hand edits to remove extra asterisk and whitespace here and there.
Building BIND 9 with older version of BIND 9 installed would result in
build failure. Fix the last two remaining cases where <prog>_CFLAGS was
being used leading to wrong order of the build flags on the command line.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
