Add "+showbadvers" to display the BADVERS response similarly
to "+showbadcookie". Additionally reset the EDNS version to
the requested version in "dig +trace" so that EDNS version
negotiation can be tested at all levels of the trace rather
that just when requesting the root nameservers.
The new +[no]svcparamkeycompat option for dig enables the
backward-compatible mode for the Service Parameter Keys'
(SvcParamKeys) representation format. See the previous commit
for more information.
To enable FIPS mode at runtime use 'dig -F'. The operating system
must have FIPS support available for this to succeed. This is on
by default when built with --enable-fips-mode.
certain dig options which were deprecated and became nonoperational
several releases ago still had documentation in the dig man page and
warnings printed when they were used: these included +mapped,
+sigchase, +topdown, +unexpected, +trusted-key, and the -i and -n
options. these are now all fatal errors.
another option was described as deprecated in the man page, but
the code to print a warning was never added. it has been added now.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
If there are any problems with IDN processing, DiG will now quietly
handle the name as if IDN were disabled. This means that international
query names are rendered verbatim on the wire, and ACE names are
printed raw without conversion to UTF8.
If you want to check the syntax of international domain names,
use the `idn2` utility.
Man pages for dig/mdig/delv used `.. option:: +[no]bla` to describe two
options at once, and very old Sphinx does not support that [] in option
names.
Solution is to split negative and positive options into `+bla, +nobla`
form. In the end it improves readability because it transforms hard to
read strings with double brackets from
`+[no]subnet=addr[/prefix-length]` to
`+subnet=addr[/prefix-length], +nosubnet`.
As a side-effect it also allows easier linking to dig/mdig/delv options
using their name directly instead of always overriding the link target
to `+[no]bla` form.
Transformation was done using regex:
s/:: +\[no\]\(.*\)/:: +\1, +no\1
... and manual review around occurences matching regex
+no.*=
Fixes: #3301
This commit adds support for Strict/Mutual TLS to dig.
The new command-line options and their behaviour are modelled after
kdig (+tls-ca, +tls-hostname, +tls-certfile, +tls-keyfile) for
compatibility reasons. That is, using +tls-* is sufficient to enable
DoT in dig, implying +tls-ca
If there is no other DNS transport specified via command-line,
specifying any of +tls-* options makes dig use DoT. In this case, its
behaviour is the same as if +tls-ca is specified: that is, the remote
peer's certificate is verified using the platform-specific
intermediate CA certificates store. This behaviour is introduced for
compatibility with kdig.
Replace :manpage: with :iscman: to generate internal hyperlinks. That
way reader can use links even when offline, and jumps to man pages
for the same version.
Formerly HTML version of man pages did not have links in See Also
section because :manpage: role in Sphinx can generate only external
hyperlinks - and we do not have that enabled.
Enabling the Sphinx :manpage: linking could reliably create hyperlinks
only to external URLs, but that would take users to another version
of docs.
Generated by:
find bin -name '*.rst' | xargs sed -i -e 's/:manpage:`\([^(]\+\)(\([0-9]\))`/:iscman:`\1(\2) <\1>`/g'
+ hand-edit to revert change for mmencode reference which is
not provided in our source tree.
Use the new role :iscman: to replace all occurences or ``binary``
with :iscman:`binary`, creating a hyperlink to the manual page.
Generated using:
find bin -name *.rst | xargs fgrep --files-with-matches '.. iscman' | xargs -I{} -n1 basename {} .rst > /tmp/progs
for PROG in $(cat /tmp/progs); do find -name '*.rst' | xargs sed -i -e "s/\`\`$PROG\`\`/:iscman:\`$PROG\`/g"; done
Additional hand-edits were done mainly around filter-aaaa and
filter-a which are program names and and option names at the
same time. Couple more edits was neede to fix .rst syntax broken by
automatic replacement.
Sphinx has it's own :program: syntax for refering to program names.
Use it for self-references in manual pages. These self-references are
not clickable and not as eye-cathing as links, which is a good thing.
There is no point in attracting attention to ``dig`` several times on a
single page dedicated to dig itself.
Substituted automatically using:
find bin -name *.rst | xargs fgrep --files-with-matches '.. program' | xargs -n1 bash /tmp/repl.sh
With /tmp/repl.sh being:
BASE=$(basename "$1" .rst)
sed -i -e "s/\`\`$BASE\`\`/:program:\`$BASE\`/g" "$1"
The new directive and role "iscman" allow to tag & reference man pages in
our source tree. Essentially it is just namespacing for ISC man pages,
but it comes with couple benefits.
Differences from .. _man_program label we formerly used:
- Does not expand :ref:`man_program` into full text of the page header.
- Generates index entry with category "manual page".
- Rendering style is closer to ubiquitous to the one produced
by ``named`` syntax.
Differences from Sphinx built-in :manpage: role:
- Supports all builders with support for cross-references.
- Generates internal links (unlike :manpage: which generates external
URLs).
- Checks that target exists withing our source tree.
Side-effect of hyperlinking is that typos in program and option names
are now detected by Sphinx.
Candidate -options were detected using:
find -name *.rst | xargs grep '``-[^`]'
and then modified from ``-o`` to :option:`-o` using regex
s/``\(-[^`]\+\)``/:option:`\1`/
+ manual modifications where necessary.
Non-hyphenated options were detected by looking at context around
program names:
find bin -name *.rst | xargs -I{} -n1 basename {} .rst | sort -u
and grepping for program name with trailing whitespace.
Stand-alone program names like ``named`` are not hyperlinked in this
commit.
The markup allows referencing individual options, and also makes them
more legible (no more thin red text on gray background).
Most of the work was done using regexes:
s/^``-\(.*\)``$/.. option:: -\1\r/
s/^``+\(.*\)``$/.. option:: +\1\r/
on bin/**/*.rst files along with visual inspection and hand-edits,
mostly for positional arguments.
Regex for rndc.rst:
s/^``\(.*\)``/.. option:: \1\r/
+ hand edits to remove extra asterisk and whitespace here and there.
The terms "DNS over HTTPS" and "DNS over TLS" should be hyphenated when
they are used as adjectives and non-hyphenated otherwise. Ensure all
occurrences of these terms in the source tree follow the above rule.
(CHANGES and release notes are intentionally left intact.)
Tweak a related ARM snippet, fixing a typo in the process.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
The network manager does not support returning UDP datagrams to
clients from unexpected sources; it is therefore not possible for
dig to accept them. The "+[no]unexpected" option has therefore
been removed from the dig command and its documentation.
The ARM and the manpages have been converted into Sphinx documentation
format.
Sphinx uses reStructuredText as its markup language, and many of its
strengths come from the power and straightforwardness of
reStructuredText and its parsing and translating suite, the Docutils.
