When performing QNAME minimization, named now sends an NS
query for the original QNAME, to prevent the parent zone from
receiving the QTYPE.
For example, when looking up example.com/A, we now send NS queries
for both com and example.com before sending the A query to the
servers for example.com. Previously, an A query for example.com
would have been sent to the servers for com.
Several system tests needed to be adjusted for the new query pattern:
- Some queries in the serve-stale test were sent to the wrong server.
- The synthfromdnssec test could fail due to timing issues; this
has been addressed by adding a 1-second delay.
- The cookie test could fail due to the a change in the count of
TSIG records received in the "check that missing COOKIE with a
valid TSIG signed response does not trigger TCP fallback" test case.
- The GL #4652 regression test case in the chain system test depends
on a particular query order, which no longer occurs when QNAME
minimization is active. We now disable qname-minimization
for that test.
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
the number of steps that can be followed in a CNAME chain
before terminating the lookup has been reduced from 16 to 11.
(this is a hard-coded value, but will be made configurable later.)
Update the CNAME chain test to correspond to the changed behavior,
because now named returns SERVFAIL when hitting the maximum query
restarts limit (e.g. happening when following a long CNAME chain).
In the current test auth will hit the limit and return partial data
with a SERVFAIL code, while the resolver will return no data with
a SERVFAIL code after auth returns SERVFAIL to it.
Explicitly use an empty 'trust-anchors' statement in the system
tests where it was used implicitly before.
In resolver/ns5/named.conf.in use the trust anchor in 'trusted.conf',
which was supposed to be used there.
These tests have ns1 configured as a mock root server. Make sure it is
used in all config files of those tests, otherwise some queries could
leak to root nameservers.
In Net::DNS 1.42 $ns->main_loop no longer loops. Use current methods
for starting the server, wait for SIGTERM then cleanup child processes
using $ns->stop_server(), then remove the pid file.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
Change the way arithmetic operations are performed in system test shell
scripts from using `expr` to `$(())`. This ensures that updating the
variable won't end up with a non-zero exit code, which would case the
script to exit prematurely when `set -e` is in effect.
The following replacements were performed using sed in all text files
(git grep -Il '' | xargs sed -i):
s/status=`expr $status + $ret`/status=$((status + ret))/g
s/n=`expr $n + 1`/n=$((n + 1))/g
s/t=`expr $t + 1`/t=$((t + 1))/g
s/status=`expr $status + 1`/status=$((status + 1))/g
s/try=`expr $try + 1`/try=$((try + 1))/g
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
The checkbashisms script reports errors like this one:
script util/check-line-length.sh does not appear to have a #! interpreter line;
you may get strange results
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Extend the "chain" system test with AUTHORITY section checks for signed,
secure delegations. This complements the checks for signed, insecure
delegations added by commit 26ec4b9a89.
Extend the existing AUTHORITY section checks for signed, insecure
delegations to ensure nonexistence of DS RRsets in such responses.
Adjust comments accordingly.
Ensure dig failures cause the "chain" system test to fail.
Add a set of system tests which check the contents of the AUTHORITY
section for signed, insecure delegation responses constructed from CNAME
records and wildcards, both for zones using NSEC and NSEC3.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
