This can be set at the option, view and server levels and causes
named to add an EDNS ZONEVERSION option to requests. Replies are
logged to the 'zoneversion' category.
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
this commit removes the deprecated "sortlist" option. the option
is now marked as ancient; it is a fatal error to use it in
named.conf.
the sortlist system test has been removed, and other tests that
referenced the option have been modified.
the enabling functions, dns_message_setsortorder() and
dns_rdataset_towiresorted(), have also been removed.
The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature. There are no
reasons to keep this feature in the production code anymore.
Remove the feature to simplify the code.
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
This change adds a "none" parameter to the query-source[-v6]
options in named.conf, which forbid the usage of IPv4 or IPv6
addresses when doing upstream queries.
The query-source option has the slight quirk of allowing the address to
be specified in two ways, either as every other source option, or as an
"address" key-value pair.
For this reason, it had a separate parsing function from other X-source
options, but it is possible to extend the parsing of other X-sources to
be generic and also handle query-source.
This commit just does that.
the logging of error-report queries is no longer activated by
the view's "send-report-channel" option; that now only configures
the agent-domain value that is to be sent in authoritative
responses. the warning that was logged when "send-agent-domain"
was set to a value that is not a locally configured zone has
been removed.
error-report logging is now activated by the presence of an
authoritative zone with the "log-report-channel" option set to
"yes". this is not permitted in the root zone.
NOTE: a zone with "log-report-channel yes;" should contain a
"*._er" wildcard, but that requirement is not yet enforced.
add a boolean "log-report-channel" option for primary and
secondary zones, which sets the DNS_ZONEOPT_LOGREPORTS zone
flag. this option is not yet functional.
This commit adds support for the EDNS Report-Channel option,
which is returned in authoritative responses when EDNS is in use.
"send-report-channel" sets the Agent-Domain value that will be
included in EDNS Report-Channel options. This is configurable at
the options/view level; the value is a DNS name. Setting the
Agent-Domain to the root zone (".") disables the option.
When this value has been set, incoming queries matchng the form
_er.<qtype>.<qname>.<extended-error-code>._er.<agent-domain>/TXT
will be logged to the dns-reporting-agent channel at INFO level.
(Note: error reporting queries will only be accepted if sent via
TCP or with a good server cookie. If neither is present, named
returns BADCOOKIE to complete the DNS COOKIE handshake, or TC=1
to switch the client to TCP.)
This commit adds support for timestamps in iso8601 format with timezone
when logging. This is exposed through the iso8601-tzinfo printtime
suboption.
It also makes the new logging format the default for -g output,
hopefully removing the need for custom timestamp parsing in scripts.
Remove the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Remove the use of source ports for parental-agents.
Also remove the deprecated options use-{v4,v6}-udp-ports and
avoid-{v4,v6}udp-ports.
This limits the maximum number of received incremental zone
transfer differences for a secondary server. Upon reaching the
confgiured limit, the secondary aborts IXFR and initiates a full
zone transfer (AXFR).
Add a new configuration option to enable Offline KSK key management.
Offline KSK cannot work with CSK because it splits how keys with the
KSK and ZSK role operate. Therefore, one key cannot have both roles.
Add a configuration check to ensure this.
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
Since the minimal OpenSSL version is now OpenSSL 1.1.1, remove all kind
of OpenSSL shims and checks for functions that are now always present in
the OpenSSL libraries.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Aydın Mercan <aydin@isc.org>
In order to protect from a malicious DNS client that sends many
queries with a SIG(0)-signed message, add a quota of simultaneously
running SIG(0) checks.
This protection can only help when named is using more than one worker
threads. For example, if named is running with the '-n 4' option, and
'sig0checks-quota 2;' is used, then named will make sure to not use
more than 2 workers for the SIG(0) signature checks in parallel, thus
leaving the other workers to serve the remaining clients which do not
use SIG(0)-signed messages.
That limitation is going to change when SIG(0) signature checks are
offloaded to "slow" threads in a future commit.
The 'sig0checks-quota-exempt' ACL option can be used to exempt certain
clients from the quota requirements using their IP or network addresses.
The 'sig0checks-quota-maxwait-ms' option is used to define a maximum
amount of time for named to wait for a quota to appear. If during that
time no new quota becomes available, named will answer to the client
with DNS_R_REFUSED.
Be stricter in durations that are accepted. Basically we accept ISO 8601
formats, but fail to detect garbage after the integers in such strings.
For example, 'P7.5D' will be treated as 7 days. Pass 'endptr' to
'strtoll' and check if the endptr is at the correct suffix.
the RRL test included a test case that tried to start named with
a broken configuration. the same error could be found with
named-checkconf, so it should have been tested in the checkconf
system test.
Add checks into the 'checkconf' system test to make sure that the
'dnssec-validation yes' option fails without configured trusted
anchors, and succeeds with configured non-empty, as well as empty
trusted anchors.
the 'low', 'high' and 'discount' parameters to 'fetch-quota-param'
are meant to be ratios with values between zero and one, but higher
values can be assigned. this could potentially lead to an assertion
in maybe_adjust_quota().
The name "uri" was considered to be too generic and could potentially
clash with a future URI configuration option. Renamed to "pkcs11-uri".
Note that this option name was also preferred over "pkcs11uri", the
dash is considered to be the more clearer form.
The check for printing zone list failed because of these additional
lines in the output:
good.conf:22: dnssec-policy: key algorithm 13 has predefined length; \
ignoring length value 256
I am not sure why this failure hasn't happened before already.
Similar to key-directory, check for zones in different views and
different key and signing policies. Zones must be using different key
directories to store key files on disk.
Now that a key directory can be linked with a dnssec-policy key, the
'keydirexist' checking needs to be reshuffled.
Add tests for bad configuration examples, named-checkconf should catch
those. Also add test cases for a mix of key-directory and key-store
directory.
Similar to key-directory, check if the key-store directory exists and
if it is an actual directory.
This commit fixes an accidental test bug in checkconf where if
the "warn key-dir" test failed, the result was ignored.
Add checkconf check to ensure that the used key-store in the keys
section exists. Error if that is not the case. We also don't allow
the special keyword 'key-directory' as that is internally used to
signal that the zone's key-directory should be used.
Add new configuration for setting key stores. The new 'key-store'
statement allows users to configure key store backends. These can be
of type 'file' (that works the same as 'key-directory') or of type
'pkcs11'. In the latter case, keys should be stored in a HSM that is
accessible through a PKCS#11 interface.
Keys configured within 'dnssec-policy' can now also use the 'key-store'
option to set a specific key store.
Update the checkconf test to accomodate for the new configuration.
The system tests need to be updated because non-zero iterations are no
longer accepted.
The autosign system test changes its iterations from 1 to 0 in one
test case. This requires the hash to be updated.
The checkconf system test needs to change the iterations in the good
configuration files to 0, and in the bad ones to 1 (any non-zero value
would suffice, but we test the corner case here). Also, the expected
failure message is change, so needs to be adjusted.
The nsec3 system test also needs iteration configuration adjustments.
In addition, the test script no longer needs the ITERATIONS environment
variable.
In the process of updating the system tests, I noticed an error
in the dnssec-policy "nsec3-other", where the salt length in one
configuration file is different than in the other (they need to be
the same). Furthermore, the 'rndc signing -nsec3param' test case
is operated on the zone 'nsec-change.kasp', so is moved so that the
tests on the same zone are grouped together.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The Unix Domain Sockets support in BIND 9 has been completely disabled
since BIND 9.18 and it has been a fatal error since then. Cleanup the
code and the documentation that suggest that Unix Domain Sockets are
supported.
The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature.
Remove the feature to simplify the code.
these options concentrate zone maintenance actions into
bursts for the benefit of servers with intermittent connections.
that's no longer something we really need to optimize.
