When the tests were added, the files were generated without FIPS
compatibility in mind. That made the tests fail on recent OpenSSL
versions in FIPS mode.
So, the files were regenerated on a FIPS compliant system using the
following stanza:
$ openssl dhparam -out <file> 3072
Apparently, the old files are not valid for FIPS starting with OpneSSL
3.1.X release series as "FIPS 140-3 compliance changes" are mentioned
in the changelog:
https://openssl-library.org/news/openssl-3.1-notes/
Some distributions (notably, debian bookworm) have deprecated the
`python` interpreter in favor of `python3`. Since our scripts are
python3 anyway, use the proper numbered version in shebang to make
scripts easily executable.
Add two new masterformat tests - the 'huge' zone fits within the ns1
limit and loads on the primary ns1 server, but must not transfer to the
ns2 secondary, and the 'uber' zone should not even load on the primary
ns1 server.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
Explicitly use an empty 'trust-anchors' statement in the system
tests where it was used implicitly before.
In resolver/ns5/named.conf.in use the trust anchor in 'trusted.conf',
which was supposed to be used there.
This commit extends the 'doth' system tests with additional secondary
NS instance that reuses the same 'tls' entry for connecting the the
primary to download zones. This configurations were known to crash
secondaries in some cases.
This file is executed outside of pytest with pure python, which doesn't
do any AssertionError message rewriting like pytest. Ensure the assert
messages in this file provide a useful debug message.
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
Dumping of the freshly transferred zone file can take some time.
Retry 5 times before failing.
The log excerpt below shows such a case, when dumping lasted more than
two seconds.
06-Mar-2023 09:32:09.973 zone example6/IN: Transfer started.
06-Mar-2023 09:32:10.301 zone example6/IN: zone transfer finished: success
06-Mar-2023 09:32:10.301 zone_dump: zone example6/IN: enter
06-Mar-2023 09:32:11.789 client @0x7fe9ab435d68 10.53.0.10#44113 (example6): AXFR request
06-Mar-2023 09:32:11.801 client @0x7fe9ab435d68 10.53.0.10#44113 (example6): transfer of 'example6/IN': AXFR ended: 5 messages, 2676 records, 55815 bytes, 0.011 secs (5074090 bytes/sec) (serial 1397051952)
06-Mar-2023 09:32:12.409 zone_gotwritehandle: zone example6/IN: enter
06-Mar-2023 09:32:12.421 dump_done: zone example6/IN: enter
06-Mar-2023 09:32:12.421 zone_journal_compact: zone example6/IN: target journal size 53044
There can be comments in dig output for a zone transfer only in case
of an error, so we should print those errors not when wait_for_tls_xfer
succeeds, but when it fails.
Also, there is no point in printing those comments when a failure was
indeed expected.
While some of these tests are for DoT which doesn't require nghttp2,
the server configs won't allow the server to start without nghttp2
support during compile time.
It might be possible to split these tests into DoT and DoH and only
require nghttp2 for DoH tests, but since almost all of our CI jobs are
compiled with nghttp2, we wouldn't gain a lot of coverage, so it's
probably not worth the effort.
Sometimes doth test could intermittently fail shortly after start due
to inability to complete a zone transfer in time. As it turned out, it
could happen due to transfers-in/out limits. Initially the defaults
were fine, but over time, especially when adding Strict/Mutual TLS, we
added more than 10 zones so it became possible to hit the limits.
This commit takes care of that by bumping the limits.
This commit reduces the size of HTTP listener quota from 300 (default)
to 100 so that it would make hitting any global limits in case of
running multiple tests in parallel in multiple containers unlikely.
This way the need in opening many file descriptors of different
kinds (e.g. client side connections and pipes) gets significantly
reduced while the required code paths are still verified.
The comments in CA.cfg file serve as a good tutorial for setting up
a simple PKI for a system test. There is a typo in one of the presented
commands, which results in openssl not exiting with an error message
instead of generating a certificate.
Fix the typo.
Before the commit some checks in the system test would try to verify
that different HTTP methods can be used and are functional. However,
until recently, it was not possible to tell from the output which
method was in fact used, so it turned out that +http-plain-get option
is broken.
This commit add the additional checks to prevent that from happening
in the future.
PyLint 2.13.7 reports the following error:
bin/tests/system/doth/conftest.py:34:28: E0601: Using variable 'stderr' before assignment (used-before-assignment)
The reason the current code has not caused problems before is that
invoking gnutls-cli with just the --logfile=/dev/null argument causes it
to always return with a non-zero exit code, either due to the option not
being supported or due to the hostname argument not being provided. In
other words, the 'except' branch has always been taken. PyLint is
obviously right on a syntactical level, though.
Instead of relying on a less than obvious code flow (where the 'except'
branch is always taken), rework the flagged code by employing
subprocess.run(..., check=False) instead of subprocess.check_output(),
making exception handling redundant.
While this issue was investigated, it was also noticed that
subprocess.check_output() was incorrectly used as a context manager:
Popen objects are context managers, but subprocess.check_output() and
subprocess.run() are not. Fix by dropping the relevant 'with'
statement.
This commit extends the 'doth' system test with a set of Strict/Mutual
TLS related checks.
This commit also makes each doth NS instance use its own TLS
certificate that includes FQDN, IPv4, and IPv6 addresses, issued using
a common Certificate Authority, instead of ad-hoc certs.
Extend servers initialisation timeout to 60 seconds to improve the
tests stability in the CI as certain configurations could fail to
initialise on time under load.
Ensure all "import dns.*" statements are always placed after
pytest.importorskip('dns') calls, in order to allow the latter to
fulfill their purpose. Explicitly import all dnspython modules used by
each dnspython-based test to avoid relying on nested imports. Replace
function-scoped imports with global imports to reduce code duplication.
Most Python-based system tests need to know which ports were assigned to
a given test by bin/tests/system/get_ports.sh. This is currently
handled by inspecting the values of various environment variables (set
by bin/tests/system/run.sh) and passing the port numbers to Python
scripts via pytest fixtures. However, this glue code has so far been
copy-pasted into each system test using it, rather than reused.
Since pytest also looks for conftest.py files in parent directories,
move commonly used fixtures to bin/tests/system/conftest.py. Set the
scope of all the moved fixtures to "session" as their return values are
only based on environment variables, so there is no point in recreating
them for every test requesting them. Adjust test code accordingly.
Sometimes the serving a query or two might fail in the test due to the
listeners not being reinitialised on time. This commit makes the test
suite to wait for reconfiguration message in the log file to detect
the time when the reconfiguration request completed.
gnutls-cli is tricky to script around as it immediately closes the
server connection when its standard input is closed. This prevents
simple shell-based I/O redirection from being used for capturing the DNS
response sent over a TLS connection and the workarounds for this issue
employ non-standard utilities like "timeout".
Instead of resorting to clever shell hacks, reimplement the relevant
check in Python. Exit immediately upon receiving a valid DNS response
or when gnutls-cli exits in order to decrease the test's run time.
Employ dnspython to avoid the need for storing DNS queries in binary
files and to improve test readability. Capture more diagnostic output
to facilitate troubleshooting. Use a pytest fixture instead of an
Autoconf macro to keep test requirements localized.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
This commit removes unused listen-on statements from the ns3 instance
in order to reduce the startup time. That should help with occasional
system test initialisation hiccups in the CI which happen because the
required instances cannot initialise in time.
Due to the fact that the primary nameserver creates a lot of TLS
contexts, its reconfiguration could take too much time on the CI,
leading to spurious test failures, while in reality it works just
fine.
This commit adds a separate instance for this test which does not use
ephemeral keys (these are costly to generate) and creates minimal
amount of TLS contexts.
