This change allows fallback from an IXFR failure to AXFR when the
reason is DNS_R_TOOMANYRECORDS. This is because this error condition
could be temporary only in an intermediate version of IXFR
transactions and it's possible that the latest version of the zone
doesn't have that condition. In such a case, the secondary would never
be able to update the zone (even if it could) without this fallback.
This fallback behavior is particularly useful with the recently
introduced max-records-per-type and max-types-per-name options:
the primary may not have these limitations and may temporarily
introduce "too many" records, breaking IXFR. If the primary side
subsequently deletes these records, this fallback will help recover
the zone transfer failure automatically; without it, the secondary
side would first need to increase the limit, which requires more
operational overhead and has its own adverse effect.
This change also fixes a minor glitch that DNS_R_TOOMANYRECORDS wasn't
logged in xfrin_fail.
Changed the default value for 'allow-transfer' to 'none'; zone
transfers now require explicit authorization.
Updated all system tests to specify an allow-transfer ACL when needed.
Revised the ARM to specify that the default is 'none'.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
This allow for the EDNS options EXPIRE and NSID to be sent when
when making requests. The existing controls controlling whether
EDNS is used and whether EXPIRE or NSID are sent are honoured.
Adjust the expected byte counts in the xfer system test to reflect
the EDNS overhead. Adjust the dig call to match named's behavior
(don't set +expire as we are talking to a secondary).
Errors getting transfer statistics from named.run where not detected
as ret was not set to one if there hadn't been a success after looping
for a while.
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Make sure an incoming IXFR containing an SOA record which is not placed
at the apex of the transferred zone does not result in a broken version
of the zone being served by named and/or a subsequent crash.
On FreeBSD, the stack is destroyed more aggressively than on Linux and
that revealed a bug where we were allocating the 16-bit len for the
TCPDNS message on the stack and the buffer got garbled before the
uv_write() sendback was executed. Now, the len is part of the uvreq, so
we can safely pass it to the uv_write() as the req gets destroyed after
the sendcb is executed.
Due to the platform differences, on non-Linux platforms, the xfer and
ixfr tests fails and zero test gets stuck.
This commit will get reverted when we add support for netmgr
multi-threading.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
Since the message confirming outgoing transfer completion is logged
asynchronously, it may happen that transfer statistics may not yet be
logged by the time the dig command triggering a given transfer returns.
This causes false positives for the "ixfr" and "xfer" system tests.
Prevent this from happening by checking outgoing transfer statistics up
to 10 times, in 1-second intervals.
Temporary files created by a given system test should be removed by its
clean.sh script, not its setup.sh script. Remove redundant "rm"
invocations from setup.sh scripts. Move required "rm" invocations from
setup.sh scripts to their corresponding clean.sh scripts.
For all system tests utilizing named instances, call clean.sh from each
test's setup.sh script in a consistent way to make sure running the same
system test multiple times using run.sh does not trigger false positives
caused by stale files created by previous runs.
Ideally we would just call clean.sh from run.sh, but that would break
some quirky system tests like "rpz" or "rpzrecurse" and being consistent
for the time being does not hurt.
Ensure IXFR statistics are calculated correctly by dig and named, both
for incoming and outgoing transfers. Disable EDNS when using dig to
request an IXFR so that the same reference file can be used for testing
statistics calculated by both dig and named (dig uses EDNS by default
when sending transfer requests, which affects the number of bytes
transferred).
Every prereq.sh script must include bin/tests/system/conf.sh, otherwise
if some prerequisite is not met, errors about echo_i not being found
will be printed instead of actual error messages.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.
- removed a few remaing places where output wasn't being passed
through echo_i or cat_i
- added a "digcomp" function to conf.sh.in to send digcomp.pl output
through cat_i and return the correct exit value
- set SYSTESTDIR when calling echo_i from nsX directories, so that
the test name will always be printed correctly
- fixed a test name typo in conf.sh.in
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
