this test adds a record with empty non-terminal nodes above it. this
has also been observed to trigger the crash in NSEC3 zones.
NOTE: the test currently fails, because while there is no crash, the
query results are not as expected. when we add a node below an ENT,
receive_secure_serial() gets DNS_R_PARTIALMATCH, and the signed
zone is never updated. this is not a regression from fixing the
crash bug; it's a separate inline-signing bug.
test that there's no crash when querying for a newly-deleted node.
(incidentally also renamed ns3/named.conf.in to ns3/named1.conf.in,
because named2.conf.in does exist, and they should match.)
If the dnskey-ttl in the dnssec-policy doesn't match the DNSKEY's
ttl then the DNSKEY, CDNSKEY and CDS rrset should be updated by
named to reflect the expressed policy. Check that named does this
by creating a zone with a TTL that does not match the policy's TTL
and check that it is correctly updated.
The system tests need to be updated because non-zero iterations are no
longer accepted.
The autosign system test changes its iterations from 1 to 0 in one
test case. This requires the hash to be updated.
The checkconf system test needs to change the iterations in the good
configuration files to 0, and in the bad ones to 1 (any non-zero value
would suffice, but we test the corner case here). Also, the expected
failure message is change, so needs to be adjusted.
The nsec3 system test also needs iteration configuration adjustments.
In addition, the test script no longer needs the ITERATIONS environment
variable.
In the process of updating the system tests, I noticed an error
in the dnssec-policy "nsec3-other", where the salt length in one
configuration file is different than in the other (they need to be
the same). Furthermore, the 'rndc signing -nsec3param' test case
is operated on the zone 'nsec-change.kasp', so is moved so that the
tests on the same zone are grouped together.
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
If the zone already has existing NSEC/NSEC3 chains then zone_sign
needs to continue to use them. If there are no chains then use
kasp setting otherwise generate an NSEC chain.
Change one of the test cases to use a different digest type (4). The
system tests and kasp script need to be updated to take into account
the new algorithm (instead of the hard coded 2).
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
Add one more case that tests reconfiguring a zone to turn off
inline-signing. It should still be a valid DNSSEC zone and the NSEC3
parameters should not change.
Add another test to ensure that you cannot update the zone with a
NSEC3 record.
Add a kasp system test that reconfigures a dnssec-policy zone from
maintaining DNSSEC records directly to the zone to using inline-signing.
Add a similar test case to the nsec3 system test, testing the same
thing but now with NSEC3 in use.
The wait_for_zone_is_signed function was never called, which could lead
to test failures due to timing issues (where a zone was not fully signed
yet, but the test was trying to verify the zone).
Also add two missing set_nsec3param calls to ensure the ITERATIONS
value is set for these test cases.
Add two scenarios where we change the dnssec-policy from using RSASHA1
to something with NSEC3.
The first case should work, as the DS is still in hidden state and we
can basically do anything with DNSSEC.
The second case should fail, because the DS of the predecessor is
published and we can't immediately remove the predecessor DNSKEY. So
in this case we should keep the NSEC chain for a bit longer.
Add two more scenarios where we change the dnssec-policy from using
NSEC3 to something NSEC only. Both should work because there are no
restrictions on using NSEC when it comes to algorithms, but in the
cases where the DS is published we can't bluntly remove the predecessor.
Extend the nsec3 system test by also checking the DNSKEY RRset for the
expected DNSKEY records. This requires some "kasp system"-style setup
for each test (setting key properties and key states). Also move the
dnssec-verify check inside the check_nsec/check_nsec3 functions because
we will have to do that every time.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Update the nsec3 system tests to use the new default values. Change
the policy for "nsec3-other" so that we still have a test case for
non-zero salt length.
When performing the 'setnsec3param' task, zones that are not loaded will have
their task rescheduled. We should do this only if the zone load is still
pending, this prevents zones that failed to load get stuck in a busy wait and
causing a hang on shutdown.
Add a zone to the configuration file that uses NSEC3 with dnssec-policy
and fails to load. This will cause setnsec3param to go into a busy wait
and will cause a hang on shutdown.
Add a test case where 'named' is restarted and ensure that an already
signed zone does not change its NSEC3 parameters.
The test case first tests the current zone and saves the used salt
value. Then after restart it checks if the salt (and other parameters)
are the same as before the restart.
This test case changes 'set_nsec3param'. This will now reset the salt
value, and when checking for NSEC3PARAM we will store the salt and
use it when testing the NXDOMAIN response. This does mean that for
every test case we now have to call 'set_nsec3param' explicitly (and
can not omit it because it is the same as the previous zone).
Finally, slightly changed some echo output to make debugging friendlier.
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
Implement support for NSEC3 in dnssec-policy. Store the configuration
in kasp objects. When configuring a zone, call 'dns_zone_setnsec3param'
to queue an nsec3param event. This will ensure that any previous
chains will be removed and a chain according to the dnssec-policy is
created.
Add tests for dnssec-policy zones that uses the new 'nsec3param'
option, as well as changing to new values, changing to NSEC, and
changing from NSEC.
