The -n (nametype) option for keys defaults to ZONE for DNSKEY
type keys, and HOST for KEY type keys. There is currently no
practical reason to use any other name type; we can simplify
things by removing the option.
This check in the nsupdate system test expects the opaque
representation of the "dohpath" Service Parameter Key. Use
the +svcparamkeycompat dig option to enable it.
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
When the tests were added, the files were generated without FIPS
compatibility in mind. That made the tests fail on recent OpenSSL
versions in FIPS mode.
So, the files were regenerated on a FIPS compliant system using the
following stanza:
$ openssl dhparam -out <file> 3072
Apparently, the old files are not valid for FIPS starting with OpneSSL
3.1.X release series as "FIPS 140-3 compliance changes" are mentioned
in the changelog:
https://openssl-library.org/news/openssl-3.1-notes/
Explicitly use an empty 'trust-anchors' statement in the system
tests where it was used implicitly before.
In resolver/ns5/named.conf.in use the trust anchor in 'trusted.conf',
which was supposed to be used there.
Some tests don't have a mock root server configured, because they don't
need one. However, these tests might still leak queries to actual name
servers. Add a shared root hints file which can serve as a blackhole for
these queries.
The "exceeded time limit waiting for literal 'too many DNS UPDATEs
queued' in ns1/named.run" is prone to fail due to a timing issue.
Despite out efforts to stabilize it, the check still often fails on
FreeBSD in our CI. Allow the test to be re-run on this platform.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
tsig-keygen generates key files that are different to those that
where generated by dnssec-keygen. Check that nsupdate can still
read those old format files.
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
* nsupdate should take 12 seconds (one try and three retries with
3 second timeout for each), UDP mode
* nsupdate -u 4 -r 1 should take 8 seconds (one try and one retry with
4 second timeout for each), UDP mode
* nsupdate -u 0 -t 8 -r 1 should also take 8 seconds, UDP mode
* nsupdate -u 4 -t 30 -r 1 should also take 8 seconds, as -u takes
precedence over -t, UDP mode
* nsupdate -t 8 -v should also take 8 seconds, TCP mode
Include MD5 feature detection in featuretest tool and use it in some
places. When RHEL distribution or Fedora ELN is in FIPS mode, then MD5
algorithm is unavailable completely and even hmac-md5 algorithm usage
will always fail. Work that around by checking MD5 works and if not,
skipping its usage.
Those changes were dragged as downstream patch bind-9.11-fips-tests.patch
in Fedora and RHEL.
the nsupdate system test was intermittently failing due to the update
quota not being exceeded when it should have been. this is most likely
a timing issue: the client is sending updates too slowly, or the server
is processing them too quickly, for the quota to fill. this commit
attempts to make that the failure less likely by increasing the number
of update transactions from 10 to 20.
The validity default days value of 1 was used for debugging and
left as such accidentally.
Use 10950 days, as used elsewhere (for example, in doth test CA).
This does not affect anything, the value will be effective when
generating new test certificates in the future.
verify that updates are refused when the client is disallowed by
allow-query, and update forwarding is refused when the client is
is disallowed by update-forwarding.
verify that "too many DNS UPDATEs" appears in the log file when too
many simultaneous updates are processing.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
Remove test cases that rely upon key and denial of existence
management operations triggered by dynamic updates.
The autosign system test needed a bit more care than just removing
because the test cases are dependent on each other, so there are some
additional tweaks such as setting the NSEC3PARAM via rndc signing,
and renaming zone input files. In the process, some additional
debug output files have been added, and a 'ret' fail case overwrite
was fixed.
