When performing QNAME minimization, named now sends an NS
query for the original QNAME, to prevent the parent zone from
receiving the QTYPE.
For example, when looking up example.com/A, we now send NS queries
for both com and example.com before sending the A query to the
servers for example.com. Previously, an A query for example.com
would have been sent to the servers for com.
Several system tests needed to be adjusted for the new query pattern:
- Some queries in the serve-stale test were sent to the wrong server.
- The synthfromdnssec test could fail due to timing issues; this
has been addressed by adding a 1-second delay.
- The cookie test could fail due to the a change in the count of
TSIG records received in the "check that missing COOKIE with a
valid TSIG signed response does not trigger TCP fallback" test case.
- The GL #4652 regression test case in the chain system test depends
on a particular query order, which no longer occurs when QNAME
minimization is active. We now disable qname-minimization
for that test.
Now that fctx_try is being called when adb returns DNS_ADB_NOMOREADDRESSES
we don't need these priming queries for the dual-stack-servers test
to succeed.
This re-do a previously existing EDE 22 system test as well as add
another one making sure the timed out flow detection works also on UDP
when the resolver is contacting the authoritative server. (the existing
test was using TCP to contact the authoritative servers).
Since the read timeout now works, the resolver time outs from the
dispatch level instead of from the "hung fetch" timer, and so the
EDE value in 'fctx_expired()' is not being set. Remove the expected
EDE value from the test.
Instead of running the whole resolver/ns4 server with -T noaa flag,
use it only for the part where it is actually needed. The -T noaa
could interfere with other parts of the test because the answers don't
have the authoritative-answer bit set, and we could have false
positives (or false negatives) in the test because the authoritative
server doesn't follow the DNS protocol for all the tests in the resolver
system test.
when the attach-cache option is used in the options block
with an arbitrary name, it causes all views to use the same
cache. however, previously, this could cause the cache to be
deleted and a new cache created every time the server was
reconfigured. this did *not* occur when attach-cache was
used at the view level to refer back to another view's cache.
in this commit we correct the problem by checking for
pre-existing caches during reconfiguration, and moving
them from the old server cache list to the new cache list
before cleaning up and freeing the old cache list.
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
Remove the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Remove the use of source ports for parental-agents.
Also remove the deprecated options use-{v4,v6}-udp-ports and
avoid-{v4,v6}udp-ports.
With max-recursion-queries set to 50 the resolver system test was
unstable in the "checking query resolution for a domain with a valid
glueless delegation chain" check as ns1 replied with SERVFAIL.
the number of steps that can be followed in a CNAME chain
before terminating the lookup has been reduced from 16 to 11.
(this is a hard-coded value, but will be made configurable later.)
Variable assignment when calling subroutines might not be portable.
Notably, it doesn't work with FreeBSD shell, where the value of HOME
would be ignored in this case.
Since the commands are already executed in a subshell, export the HOME
variable to ensure it is properly handled in all shells.
This is a regresssion test for GL #4621 where the NODATA responses
are SOA records that match the QNAME rather than the zone name. In
particular for NS queries.
Stop the cname_and_other_data processing if we already know that the
result is true. Also, we know that CNAME will be placed in the priority
headers, so we can stop looking for CNAME if we haven't found CNAME and
we are past the priority headers.
Explicitly use an empty 'trust-anchors' statement in the system
tests where it was used implicitly before.
In resolver/ns5/named.conf.in use the trust anchor in 'trusted.conf',
which was supposed to be used there.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
'HOME=value command' should only change HOME for command but on
some platforms this occasionally sets HOME for the rest of the
test. Explicitly isolate the enviroment change using a sub shell.
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Create a zone that triggers DNAME owner name checks in a zone that
is only reachable using a dual stack server. The answer contains
a name that is higher in the tree than the query name.
e.g.
foo.v4only.net. CNAME v4only.net.
v4only.net. A 10.0.0.1
ns4 is serving the test zone (ipv4-only)
ns6 is the root server for this test (dual stacked)
ns7 is acting as the dual stack server (dual stacked)
ns9 is the server under test (ipv6-only)
The test triggers a prefetch, but fails to check if it acutally
happened, which prevented it from catching a bug when the record's
TTL value matches the configured prefetch eligibility value.
Check that prefetch happened by comparing the TTL values.
Add a test ensuring that the amount of work fctx_getaddresses() performs
for any encountered delegation is limited: delegate example.net to a set
of 1,000 name servers in the redirect.com zone, the names of which all
resolve to IP addresses that nothing listens on, and query for a name in
the example.net domain, checking the number of times the findname()
function gets executed in the process; fail if that count is excessively
large.
Since the size of the referral response sent by ans3 is about 20 kB, it
cannot be sent back over UDP (EMSGSIZE) on some operating systems in
their default configuration (e.g. FreeBSD - see the
net.inet.udp.maxdgram sysctl). To enable reliable reproduction of
CVE-2022-2795 (retry patterns vary across BIND 9 versions) and avoid
false positives at the same time (thread scheduling - and therefore the
number of fetch context restarts - vary across operating systems and
across test runs), extend bin/tests/system/resolver/ans3/ans.pl so that
it also listens on TCP and make "ns1" in the "resolver" system test
always use TCP when communicating with "ans3".
Also add a test (foo.bar.sub.tld1/TXT) that ensures the new limitations
imposed on the resolution process by the mitigation for CVE-2022-2795 do
not prevent valid, glueless delegation chains from working properly.
the 'resolve' binary was added for testing dns_client as part of
the export library. the export libraries are no longer supported,
and tests using 'delv' provide the same coverage, so 'resolve' can
be removed now.
previously, when an iterative query returned FORMERR, resolution
would be stopped under the assumption that other servers for
the same domain would likely have the same capabilities. this
assumption is not correct; some domains have been reported for
which some but not all servers will return FORMERR to a given
query; retrying allows recursion to succeed.
a test case in the 'resolver' system test was reliant on
logged output that would only be present when query tracing
was enabled, as in developer builds. that test case is now
disabled when query tracing is not available. Thanks to
Anton Castelli.
- Removed all code that only runs under CYGWIN, and made all
code that doesn't run under CYGWIN non-optional.
- Removed the $TP variable which was used to add optional
trailing dots to filenames; they're no longer optional.
- Removed references to pssuspend and dos2unix.
- No need to use environment variables for diff and kill.
- Removed uses of "tr -d '\r'"; this was a workaround for
a cygwin regex bug that is no longer needed.
1. 10 seconds is an unfortunate pick because that reintroduces the
problem described in commit 5307bf64 (for an earlier check).
Change the +tries=3 +timeout=10 to +tries=2 +time=15, so that we
minimize the risk of dig missing any responses sent by the server in
the first 15 seconds while also increasing our chances of the
response arriving in time on machines under heavy load and allowing
it a single retry in case things go awry.
2. The comment about TCP above was misleading: as painfully proven by
GitLab CI, using TCP is no guarantee of receiving a response in a
timely manner. It may help a bit, but it is certainly not a 100%
reliable solution.
Change the dig invocation to just use UDP like in the two prior
tests for consistency (and revise that comment accordingly).
