Add a new big zone, run a zone transfer in slow mode, and check
whether the zone transfer gets canceled because 100000 bytes are
not transferred in 5 seconds (as it's running in slow mode).
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
Add test cases which check that when a XoT primary server is
unreachable or is already marked as unreachble then the next
primary server in the list is used.
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
This commit adds support for timestamps in iso8601 format with timezone
when logging. This is exposed through the iso8601-tzinfo printtime
suboption.
It also makes the new logging format the default for -g output,
hopefully removing the need for custom timestamp parsing in scripts.
Remove the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Remove the use of source ports for parental-agents.
Also remove the deprecated options use-{v4,v6}-udp-ports and
avoid-{v4,v6}udp-ports.
Configure a maximum of 3 allowed differences and add 5 new records.
Check that named detected that the differences exceed the allowed
limit and successfully retries with AXFR.
Use a big zone and the slow transfer mode. Initiate a retransfer, wait
several seconds, then initiate a retransfer using a '-force' argument,
which should cancel the previous transfer and start a new one.
Changed the default value for 'allow-transfer' to 'none'; zone
transfers now require explicit authorization.
Updated all system tests to specify an allow-transfer ACL when needed.
Revised the ARM to specify that the default is 'none'.
This file was missing explicit dnssec-validation. Seems like it was
missed in our previous efforts, probably because of the different
filename / extension. Rename it to end with *.in to reflect that it is a
template file used by copy_setports.
The lock-file configuration (both from configuration file and -X
argument to named) has better alternatives nowadays. Modern process
supervisor should be used to ensure that a single named process is
running on a given configuration.
Alternatively, it's possible to wrap the named with flock(1).
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
We test EDNS requests returning FORMERR where named is expected
to retry without EDNS.
We test EDNS requests returning NOTIMP where named is expected
to fail the transfer as the remote end is not protocol compliant.
The server is expected to retry the transfer using SOA and if
the returned serial is greater than the current serial AXFR.
Check the log that IXFR is request.
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
This allow for the EDNS options EXPIRE and NSID to be sent when
when making requests. The existing controls controlling whether
EDNS is used and whether EXPIRE or NSID are sent are honoured.
Adjust the expected byte counts in the xfer system test to reflect
the EDNS overhead. Adjust the dig call to match named's behavior
(don't set +expire as we are talking to a secondary).
The changes were mostly done with sed:
find . -name '*.sh' | xargs sed -i 's/`\([^`]*\)`/$(\1)/g'
There have been a few manual changes where the regex wasn't sufficient
(e.g. backslashes inside the `...`) or wrong (`...` referring to docs or
in comments).
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
There is no 'ret' in this test, and it is obvious that 'ret=1'
should be 'tmp=1' for the check to work correctly, if the string
is not found in the log file.
the dns_xfrin module was still using the network manager directly to
manage TCP connections and send and receive messages. this commit
changes it to use the dispatch manager instead.
check in the log files of receiving servers that the originating
ports for notify and SOA query messages were set correctly from
configured notify-source and transfer-source options.
Use the configured 'source' and 'source-v6' when initiating a zone
transfer, sending a notify, or when checking for the DS. Remove the
special code for using alternate transfer sources.
Update some system tests to use the new configuration and make sure
the tests still work.
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
Add a test case that if the first primary fails, the fallback of a
second primary on plain DNS works. This is mainly to test that the port
configuration inheritance works correctly.
There was a bug in the checking of the "blackhole" ACL in
dns_request_create*(), causing an address to be treated as included
in the ACL if it was explicitly *excluded*. Thus, leaving "blackhole"
unset had no effect, but setting it to "none" would cause any
destination addresses to be rejected for dns_request purposes. This
would cause zone transfer requests and SOA queries to fail, among
other things.
The bug has been fixed, and "blackhole { none; };" was added to the
xfer system test as a regression test.
- Removed all code that only runs under CYGWIN, and made all
code that doesn't run under CYGWIN non-optional.
- Removed the $TP variable which was used to add optional
trailing dots to filenames; they're no longer optional.
- Removed references to pssuspend and dos2unix.
- No need to use environment variables for diff and kill.
- Removed uses of "tr -d '\r'"; this was a workaround for
a cygwin regex bug that is no longer needed.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
* The location of the digest type field has changed to where the
reserved field was.
* The reserved field is now called scheme and is where the digest
type field was.
* Digest type 2 has been defined (SHA256).
On FreeBSD, the stack is destroyed more aggressively than on Linux and
that revealed a bug where we were allocating the 16-bit len for the
TCPDNS message on the stack and the buffer got garbled before the
uv_write() sendback was executed. Now, the len is part of the uvreq, so
we can safely pass it to the uv_write() as the req gets destroyed after
the sendcb is executed.
Due to the platform differences, on non-Linux platforms, the xfer and
ixfr tests fails and zero test gets stuck.
This commit will get reverted when we add support for netmgr
multi-threading.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
