The 'I:checking that lifting the limit will allow everything to get
cached (20)' test was failing due to the TTL of the records being
too short for the elapsed time of the test. Raise the TTL to fix
this and adjust other tests as needed.
When performing QNAME minimization, named now sends an NS
query for the original QNAME, to prevent the parent zone from
receiving the QTYPE.
For example, when looking up example.com/A, we now send NS queries
for both com and example.com before sending the A query to the
servers for example.com. Previously, an A query for example.com
would have been sent to the servers for com.
Several system tests needed to be adjusted for the new query pattern:
- Some queries in the serve-stale test were sent to the wrong server.
- The synthfromdnssec test could fail due to timing issues; this
has been addressed by adding a 1-second delay.
- The cookie test could fail due to the a change in the count of
TSIG records received in the "check that missing COOKIE with a
valid TSIG signed response does not trigger TCP fallback" test case.
- The GL #4652 regression test case in the chain system test depends
on a particular query order, which no longer occurs when QNAME
minimization is active. We now disable qname-minimization
for that test.
Add "+showbadvers" to display the BADVERS response similarly
to "+showbadcookie". Additionally reset the EDNS version to
the requested version in "dig +trace" so that EDNS version
negotiation can be tested at all levels of the trace rather
that just when requesting the root nameservers.
In the case where 'clients-per-query' is larger than
'max-clients-per-query', raise 'max-clients-per-query' so that
'clients-per-query' equals 'max-clients-per-query' and log a warning
that this is what happened.
When generating new key pairs, one test checks if existing keys that
match the time bundle are selected, rather than extra keys being
generated. Part of the test is to check the verbose output, counting
the number of "Selecting" and "Generating" occurences. But if there
is a key collision, the ksr tool will output that the key already
exists and includes the substring "already exists, or might collide
with another key upon revokation. Generating a new key".
So substract by one the generated counter if there is a "collide"
occurrence.
Assigning value "NULL" to "newstr", but that stored value is overwritten
before it can be used.
Setting "newstr" to NULL does not have any effect, so the line can
safely be removed.
when running a system test with the USE_RR environment
variable set to 1, an rr trace is generated for named.
because rr wasn't run using libtool --mode=execute, the
trace would actually be generated for the wrapper script
generated by libtool, not for the actual named binary.
When all the addresses were already iterated over, the
dns_remote_curraddr() function asserts. So before calling it,
dns_zone_getprimaryaddr() now checks the address list using the
dns_remote_done() function. This also means that instead of
returning 'isc_sockaddr_t' it now returns 'isc_result_t' and
writes the primary's address into the provided pointer only when
returning success.
Since algorithm fetching is handled purely in libisc, FIPS mode toggling
can be purely done in within the library instead of provider fetching in
the binary for OpenSSL >=3.0.
Disabling FIPS mode isn't a realistic requirement and isn't done
anywhere in the codebase. Make the FIPS mode toggle enable-only to
reflect the situation.
Now that fctx_try is being called when adb returns DNS_ADB_NOMOREADDRESSES
we don't need these priming queries for the dual-stack-servers test
to succeed.
previously, dns_name_fromtext() took both a target name and an
optional target buffer parameter, which could override the name's
dedicated buffer. this interface is unnecessarily complex.
we now have two functions, dns_name_fromtext() to convert text
into a dns_name that has a dedicated buffer, and dns_name_wirefromtext()
to convert text into uncompressed DNS wire format and append it to a
target buffer.
in cases where it really is necessary to have both, we can use
dns_name_fromtext() to load the dns_name, then dns_name_towire()
to append the wire format to the target buffer.
dns_name_fromtext() stores the converted name in the 'name'
passed to it, and optionally also copies it in wire format to
a buffer 'target'. this makes the interface unnecessarily
complex, and could be simplified by having a different function
for each purpose. as a first step, remove uses of the target
buffer in calls to dns_name_fromtext() where it wasn't actually
needed.
the target buffer passed to dns_name_concatenate() was never
used (except for one place in dig, where it wasn't actually
needed, and has already been removed in a prior commit).
we can safely remove the parameter.
There was just a single use of passing an extra buffer to
dns_name_downcase() which have been replaced by simple call to
isc_ascii_lowercase() and the 'target' argument from dns_name_downcase()
function has been removed.
The offsets were meant to speed-up the repeated dns_name operations, but
it was experimentally proven that there's actually no real-world
benefit. Remove the offsets and labels fields from the dns_name and the
static offsets fields to save 128 bytes from the fixedname in favor of
calculating labels and offsets only when needed.
The DNS header shows if a message has multiple questions or invalid
NOTIFY sections. We can drop these messages early, right after parsing
the question. This matches RFC 9619 for multi-question messages and
Unbound's handling of NOTIFY.
To further add further robustness, we include an additional check for
unknown opcodes, and also drop those messages early.
Add early_sanity_check() function to check for these conditions:
- Messages with more than one question, as required by RFC 9619
- NOTIFY query messages containing answer sections (like Unbound)
- NOTIFY messages containing authority sections (like Unbound)
- Unknown opcodes.
The zone file for example3 (ns1/example3.db) can be modified in the
upforwd test as example3 is updated as part of the test. Whether
the zone is written out or not by the end of the test is timing
dependent. Rename ns1/example3.db to ns1/example3.db.in and copy
it to ns1/example3.db in setup so we don't trigger post test changes
checks.
Instead of relying on unreliable order of execution of the library
constructors and destructors, move them to individual binaries. The
advantage is that the execution time and order will remain constant and
will not depend on the dynamic load dependency solver.
This requires more work, but that was mitigated by a simple requirement,
any executable using libisc and libdns, must include <isc/lib.h> and
<dns/lib.h> respectively (in this particular order). In turn, these two
headers must not be included from within any library as they contain
inlined functions marked with constructor/destructor attributes.
Previously a hard-coded limitation of maximum two key or message
verification checks were introduced when checking the message's
SIG(0) signature. It was done in order to protect against possible
DoS attacks. The logic behind choosing the number two was that more
than one key should only be required only during key rotations, and
in that case two keys are enough. But later it became apparent that
there are other use cases too where even more keys are required, see
issue number #5050 in GitLab.
This change introduces two new configuration options for the views,
sig0key-checks-limit and sig0message-checks-limit, which define how
many keys are allowed to be checked to find a matching key, and how
many message verifications are allowed to take place once a matching
key has been found. The latter protects against expensive cryptographic
operations when there are keys with colliding tags and algorithm
numbers, with default being 2, and the former protects against a bit
less expensive key parsing operations and defaults to 16.
Expose the average transfer rate (in bytes-per-second) during the
last full 'min-transfer-rate-in <bytes> <minutes>' minutes interval.
If no such interval has passed yet, then the overall average rate is
reported instead.
Add a new big zone, run a zone transfer in slow mode, and check
whether the zone transfer gets canceled because 100000 bytes are
not transferred in 5 seconds (as it's running in slow mode).
This new option sets a minimum amount of transfer rate for
an incoming zone transfer that will abort a transfer, which
for some network related reasons run very slowly.
- there are now two functions for getting rdataslab size:
dns_rdataslab_size() is for full slabs and dns_rdataslab_sizeraw()
for raw slabs. there is no longer a need for a reservelen parameter.
- dns_rdataslab_count() also no longer takes a reservelen parameter.
(currently it's never used for raw slabs, so there is no _countraw()
function.)
- dns_rdataslab_rdatasize() has been removed, because
dns_rdataslab_sizeraw() can do the same thing.
- dns_rdataslab_merge() and dns_rdataslab_subtract() both take
slabheader parameters instead of character buffers, and the
reservelen parameter has been removed.
Unless explicitly specified type from host command, do fourth query for
type HTTPS RR. It is expected it will become more common and some
systems already query that record for every name.
This check in the nsupdate system test expects the opaque
representation of the "dohpath" Service Parameter Key. Use
the +svcparamkeycompat dig option to enable it.
The new +[no]svcparamkeycompat option for dig enables the
backward-compatible mode for the Service Parameter Keys'
(SvcParamKeys) representation format. See the previous commit
for more information.
This commit does several changes to isc_symtab:
1. Rewrite the isc_symtab to internally use isc_hashmap instead of
hand-stiched hashtable.
2. Create a new isc_symtab_define_and_return() api, which returns
the already defined symvalue on ISC_R_EXISTS; this allows users
of the API to skip the isc_symtab_lookup()+isc_symtab_define()
calls and directly call isc_symtab_define_and_return().
3. Merge isccc_symtab into isc_symtab - the only missing function
was isccc_symtab_foreach() that was merged into isc_symtab API.
4. Add full set of unit tests for the isc_symtab API.
If a deferred validation on data that was originally queried with
CD=1 fails, we now repeat the query, since the zone data may have
changed in the meantime.
In some cases, the numeric identifier doesn't correspond to the
directory name (i.e. `resolver` server in `shutdown` test, which is
supposed to be 10.53.0.3). These are typically servers that shouldn't be
auto-started by the runner, thus avoiding the typical `*ns<X>` name.
Support these server by allowing a fallback initialization with custom
numeric identifier in case it can't be parsed from the directory name.
The start()/stop() functions can be used in the pytests in the same way
as start_server and stop_server functions were used in shell tests. Note
that the servers obtained through the servers fixture are still started
and stopped by the test runner at the start and end of the test. This
makes these functions mostly useful for restarting the server(s)
mid-test.
Previously, these functions have been provided as fixtures. This was
limiting re-use, because it wasn't possible to call these outside of
tests / other fixtures without passing these utility functions around.
Move them into isctest.run package instead.
The ANS servers were not to written to handle NS queries at the
QNAME resulting in gratuitious protocol errors that will break tests
when NS requests are made for the QNAME.
In #1870, the expiration time of ANCIENT records were printed, but
actually the ancient records are very short lived, and the information
carries a little value.
Instead of printing the expiration of ANCIENT records, print the
expiration time of STALE records.
When the header has been marked as ANCIENT, but the ttl hasn't been
reset (this happens in couple of places), the rdataset TTL would be
set to the header timestamp instead to a reasonable TTL value.
Since this header has been already expired (ANCIENT is set), set the
rdataset TTL to 0 and don't reuse this field to print the expiration
time when dumping the cache. Instead of printing the time, we now
just print 'expired (awaiting cleanup'.
Named was failing to recover when spoofed nameserver address from
a signed zone for a peer zone were returned to a previous CD=1
query. Validate non-glue interior server addresses before using them.
the search for the deepest known zone cut in the cache could
improperly reject a node containing stale data, even if the
NS rdataset wasn't the data that was stale.
this change also improves the efficiency of the search by
stopping it when both NS and RRSIG(NS) have been found.
Changes !9948 introducing the support of extended DNS error code 1 and 2
uses SHA-1 digest for some tests which break FIPS platform. The digest
itself was irrelevant, another digest is used.
Instead of mixing the dns_resolver and dns_validator units directly with
the EDE code, split-out the dns_ede functionality into own separate
compilation unit and hide the implementation details behind abstraction.
Additionally, the EDE codes are directly copied into the ns_client
buffers by passing the EDE context to dns_resolver_createfetch().
This makes the dns_ede implementation simpler to use, although sligtly
more complicated on the inside.
Co-authored-by: Colin Vidal <colin@isc.org>
Co-authored-by: Ondřej Surý <ondrej@isc.org>
When EDE 3 (stale answer) was added the serve-stale tests were checking
for those exclusively, i.e. grepping for no "EDE" in the dig output when
no stale answer was expected.
However, some stale tests disable stale answers and make the
authoritative server unresponsive, effectively triggering a timed out
request thus an EDE 22. Update those tests so they still tests the
absence of EDE 3 error, but also the presence of EDE 22.
This re-do a previously existing EDE 22 system test as well as add
another one making sure the timed out flow detection works also on UDP
when the resolver is contacting the authoritative server. (the existing
test was using TCP to contact the authoritative servers).
The new command is `rndc memprof`. The memory profiling status is also
reported inside `rndc status`. The status also shows whether named can
toggle memory profiling or not and if the server is built with jemalloc.
A DNSSEC validation can fail in the case where multiple DNSKEY are
available for a zone and none of them are supported, but for different
reasons: one has a DS record in the parent zone using an unsupported
digest while the other one uses an unsupported encryption algorithm.
Add a specific test case covering this flow and making sure that two
extended DNS error are provided: code 1 and 2, each of them highlighting
unsupported algorithm and digest.
The servers are setup and torn down once per each test module. All the
logs and server state persists between individual tests within the same
module. The servers fixture representing these servers should be
module-wide as well.
When explicitly set to True, the "verify" argument lets dnspython verify
certificates used for the connection. As most certificates in the system
test will inevitably be self-signed, the "verify" argument defaults to
False.
The "verify" argument is present in dnspython since the version 2.5.0.
ISCCC_R_SYNTAX, ISCCC_R_EXPIRED, and ISCCC_R_CLOCKSKEW have the
same usage and text formats as DNS_R_SYNTAX, DNS_R_EXPIRED and
DNS_R_CLOCKSCREW respectively. this was originally done because
result codes were defined in separate libraries, and some tool
might be linked with libisccc but not libdns. as the result codes
are now defined in only one place, there's no need to retain the
duplicates.
building BIND without crypto support is no longer possible.
consequently this result code is never sent, and therefore we
don't need code in calling functions to handle it.
the isc_mem allocation functions can no longer fail; as a result,
ISC_R_NOMEMORY is now rarely used: only when an external library
such as libjson-c or libfstrm could return NULL. (even in
these cases, arguably we should assert rather than returning
ISC_R_NOMEMORY.)
code and comments that mentioned ISC_R_NOMEMORY have been
cleaned up, and the following functions have been changed to
type void, since (in most cases) the only value they could
return was ISC_R_SUCCESS:
- dns_dns64_create()
- dns_dyndb_create()
- dns_ipkeylist_resize()
- dns_kasp_create()
- dns_kasp_key_create()
- dns_keystore_create()
- dns_order_create()
- dns_order_add()
- dns_peerlist_new()
- dns_tkeyctx_create()
- dns_view_create()
- dns_zone_setorigin()
- dns_zone_setfile()
- dns_zone_setstream()
- dns_zone_getdbtype()
- dns_zone_setjournal()
- dns_zone_setkeydirectory()
- isc_lex_openstream()
- isc_portset_create()
- isc_symtab_create()
(the exception is dns_view_create(), which could have returned
other error codes in the event of a crypto library failure when
calling isc_file_sanitize(), but that should be a RUNTIME_CHECK
anyway.)
There was confusion about whether the interval was calculated from
the validity period provided on the command line (with -s and -e),
or from the signature being replaced.
Add text to clarify that the interval is calculated from the new
validity period.
Track inside the dns_dnsseckey structure whether we have seen the
private key, or if this key only has a public key file.
If the key only has a public key file, or a DNSKEY reference in the
zone, mark the key 'pubkey'. In dnssec-signzone, if the key only
has a public key available, consider the key to be offline. Any
signatures that should be refreshed for which the key is not available,
retain the signature.
So in the code, 'expired' becomes 'refresh', and the new 'expired'
is only used to determine whether we need to keep the signature if
the corresponding key is not available (retaining the signature if
it is not expired).
In the 'keysthatsigned' function, we can remove:
- key->force_publish = false;
- key->force_sign = false;
because they are redundant ('dns_dnsseckey_create' already sets these
values to false).
Add a test case for the scenario below.
There is a case when signing a zone with dnssec-signzone where the
private key file is moved outside the key directory (for offline
ksk purposes), and then the zone is resigned. The signature of the
DNSKEY needs refreshing, but is not expired.
Rather than removing the signature without having a valid replacement,
leave the signature in the zone (despite it needs to be refreshed).
Since the read timeout now works, the resolver time outs from the
dispatch level instead of from the "hung fetch" timer, and so the
EDE value in 'fctx_expired()' is not being set. Remove the expected
EDE value from the test.
The network manager layer has two different timers with their
own timeout values for TCP connections: connect timeout and read
timeout. Separate the connect and the read TCP timeouts in the
dispatch module too.
Instead of running the whole resolver/ns4 server with -T noaa flag,
use it only for the part where it is actually needed. The -T noaa
could interfere with other parts of the test because the answers don't
have the authoritative-answer bit set, and we could have false
positives (or false negatives) in the test because the authoritative
server doesn't follow the DNS protocol for all the tests in the resolver
system test.
this test adds a record with empty non-terminal nodes above it. this
has also been observed to trigger the crash in NSEC3 zones.
NOTE: the test currently fails, because while there is no crash, the
query results are not as expected. when we add a node below an ENT,
receive_secure_serial() gets DNS_R_PARTIALMATCH, and the signed
zone is never updated. this is not a regression from fixing the
crash bug; it's a separate inline-signing bug.
test that there's no crash when querying for a newly-deleted node.
(incidentally also renamed ns3/named.conf.in to ns3/named1.conf.in,
because named2.conf.in does exist, and they should match.)
Commit b121f02eac renamed the top-level
"primaries" block in bin/named/config.c to "remote-servers". This
configuration block lists the primary servers used for an IANA root zone
mirror when no primary servers are explicitly specified for it in the
configuration. However, the relevant part of the named_zone_configure()
function only looks for a top-level "primaries" block and not for any of
its synonyms. As a result, configuring an IANA root zone mirror with
just:
zone "." {
type mirror;
};
now results in a cryptic fatal error on startup:
loading configuration: not found
exiting (due to fatal error)
Fix by using the correct top-level block name in named_zone_configure().
This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
Since BIND 9 headers are not longer public, there's no reason to keep
the ISC_LANG_BEGINDECL and ISC_LANG_ENDDECL macros to support including
them from C++ projects.
DLV is long gone, so we can remove design documentation around DLV,
related command line options (that were already a hard failure),
and some DLV related test remnants.
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
