The "glue-cache" option was marked as deprecated by commit
5ae33351f2 (first released in BIND 9.17.6,
back in October 2020), so now obsolete that option, removing all code
and documentation related to it.
Note: this causes the glue cache feature to be permanently enabled, not
disabled.
After some back and forth, it was decidede to match the configuration
option with unbound ("so-reuseport"), PowerDNS ("reuseport") and/or
nginx ("reuseport").
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
Commit 4ca74eee49 update the zone grammar
such that the zone statement is printed with the valid options per
zone type.
This commit is a follow-up, putting back the ZONE heading and adding
a note that these zone statements may also be put inside the view
statement.
It is tricky to actually print the zone statements inside
the view statement, and so we decided that we would add a note to say
that this is possible.
Building BIND 9 with older version of BIND 9 installed would result in
build failure. Fix the last two remaining cases where <prog>_CFLAGS was
being used leading to wrong order of the build flags on the command line.
the "zone" clause can be documented using, for instance,
`cfg_test --zonegrammar primary", which prints only
options that are valid in primary zones. this was not
the method being used when generating the named.conf
man page; instead, "zone" was documented with all possible
options, and no zone types at all.
this commit removes "zone" from the generic documentation
and adds include statements in named.conf.rst so that
correct zone grammars will be included in the man page.
"masters" and "default-masters" are now flagged so they will
not be included in the named.conf man page, despite being
accepted as valid options by the parser for backward
compatibiility.
The keep-response-order option has been introduced when TCP pipelining
has been introduced to BIND 9 as a failsafe for possibly non-compliant
clients.
Declare the keep-response-order obsolete as all DNS clients should
either support out-of-order processing or don't send more DNS queries
until the DNS response for the previous one has been received.
Replace the hard-coded paths for various BIND 9 files (configuration,
pid, etc.) in the man pages and ARM with compile-time values using the
sphinx-build replace system.
This is more complicated, because the restructured text specification
doesn't allow |substitions| inside ``code-blocks``, so for each specific
file we had to create own substition which is sub-optimal, but it is
only way how to do this without adding Sphinx extension.
Formerly parental-agents grammar was an exception and it did not
auto-generate itself from source code. From now on it is generated using
the same mechanism as other grammars.
For consistency with rest of the system, I've also renamed the grammar
file and the link anchors from "parentals" to "parental-agents".
Technically this is fixup for commit
0311705d4b.
Related: !5234
The missing `::` in the .rst files caused grammar section in docs to
render empty.
The `::` was accidentally removed in an unrelated commit
58bd26b6cf which was supposed to update
only copyright headers.
Fixes: #3120
As far as I can tell, it is some leftover from the times when Sphinx
docs were introduced (commit 9fb6d11abb).
It seems like it is not referenced from anywhere.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
It's unclear if we are going to keep it or not, so let's mark it as
deprecated for a good measure. It's easier to un-deprecate it than the
other way around.
A number of DNS implementation produce NSEC records with bad type
maps that don't contain types that exist at the name leading to
NODATA responses being synthesize instead of the records in the
zone. NSEC records with these bad type maps often have the NSEC
NSEC field set to '\000.QNAME'. We look for the first label of
this pattern.
e.g.
example.com NSEC \000.example.com SOA NS NSEC RRSIG
example.com RRRSIG NSEC ...
example.com SOA ...
example.com RRRSIG SOA ...
example.com NS ...
example.com RRRSIG NS ...
example.com A ...
example.com RRRSIG A ...
A is missing from the type map.
This introduces a temporary option 'reject-000-label' to control
this behaviour.
'server <prefix> { broken-nsec yes; };' can now be used to stop
NSEC records from negative responses from servers in the given
prefix being cached and hence available to synth-from-dnssec.
This commit extends ACL syntax handling code with 'port' and
'transport' options. Currently, the extended syntax is available only
for allow-transfer options.
This commit disables the unused 'tls' clause options. For these some
backing code exists, but their values are not really used anywhere,
nor there are sufficient syntax tests for them.
These options are only disabled temporarily, until TLS certificate
verification gets implemented.
The new rules compare the target name in PTR and SRV records against
the machine name embedded in the kerberos principal. This can be
used to further restrict what PTR and SRV records can be added or
deleted via dynamic updates if desired.
Replace some "master/slave" terminology in the code with the preferred
"primary/secondary" keywords. This also changes user output such as
log messages, and fixes a typo ("seconary") in cfg_test.c.
There are still some references to "master" and "slave" for various
reasons:
- The old syntax can still be used as a synonym.
- The master syntax is kept when it refers to master files and formats.
- This commit replaces mainly keywords that are local. If "master" or
"slave" is used in for example a structure that is all over the
place, it is considered out of scope for the moment.
The documentation and feature-test were using '--with-idn' but the
configure script doesn't recognize this option. The correct option to
enable IDN support is '--with-libidn2'.
This commit adds the ability to enable or disable stateless TLS
session resumption tickets (see RFC5077). Having this ability is
twofold.
Firstly, these tickets are encrypted by the server, and the algorithm
might be weaker than the algorithm negotiated during the TLS session
establishment (it is in general the case for TLSv1.2, but the generic
principle applies to TLSv1.3 as well, despite it having better ciphers
for session tickets). Thus, they might compromise Perfect Forward
Secrecy.
Secondly, disabling it might be necessary if the same TLS key/cert
pair is supposed to be used by multiple servers to achieve, e.g., load
balancing because the session ticket by default gets generated in
runtime, while to achieve successful session resumption ability, in
this case, would have required using a shared key.
The proper alternative to having the ability to disable stateless TLS
session resumption tickets is to implement a proper session tickets
key rollover mechanism so that key rotation might be performed
often (e.g. once an hour) to not compromise forward secrecy while
retaining the associated performance benefits. That is much more work,
though. On the other hand, having the ability to disable session
tickets allows having a deployable configuration right now in the
cases when either forward secrecy is wanted or sharing the TLS
key/cert pair between multiple servers is needed (or both).
This commit adds support for enforcing the preference of server
ciphers over the client ones. This way, the server attains control
over the ciphers priority and, thus, can choose more strong cyphers
when a client prioritises less strong ciphers over the more strong
ones, which is beneficial when trying to achieve Perfect Forward
Secrecy.
This commit adds support for setting TLS cipher list string in the
format specified in the OpenSSL
documentation (https://www.openssl.org/docs/man1.1.1/man1/ciphers.html).
The syntax of the cipher list is verified so that specifying the wrong
string will prevent the configuration from being loaded.
This commit adds support for loading DH-parameters (Diffie-Hellman
parameters) via the new "dhparam-file" option within "tls" clause. In
particular, Diffie-Hellman parameters are needed to enable the range
of forward-secrecy enabled cyphers for TLSv1.2, which are getting
silently disabled otherwise.
This commit adds the ability to specify allowed TLS protocols versions
within the "tls" clause. If an unsupported TLS protocol version is
specified in a file, the configuration file will not pass
verification.
Also, this commit adds strict checks for "tls" clauses verification,
in particular:
- it ensures that loading configuration files containing duplicated
"tls" clauses is not allowed;
- it ensures that loading configuration files containing "tls" clauses
missing "cert-file" or "key-file" is not allowed;
- it ensures that loading configuration files containing "tls" clauses
named as "ephemeral" or "none" is not allowed.
"cache-file" was already documented as intended for testing
purposes only and not to be used, so we can remove it without
waiting. this commit marks the option as "ancient", and
removes all the documentation and implementing code, including
dns_cache_setfilename() and dns_cache_dump().
it also removes the documentation for the '-x cachefile`
parameter to named, which had already been removed, but the man
page was not updated at the time.
This commit adds a new configuration option to set the receive and send
buffer sizes on the TCP and UDP netmgr sockets. The default is `0`
which doesn't set any value and just uses the value set by the operating
system.
There's no magic value here - set it too small and the performance will
drop, set it too large, the buffers can fill-up with queries that have
already timeouted on the client side and nobody is interested for the
answer and this would just make the server clog up even more by making
it produce useless work.
The `netstat -su` can be used on POSIX systems to monitor the receive
and send buffer errors.
Add a new option 'purge-keys' to 'dnssec-policy' that will purge key
files for deleted keys. The option determines how long key files
should be retained prior to removing the corresponding files from
disk.
If set to 0, the option is disabled and 'named' will not remove key
files from disk.
This commit adds stub parser support and tests for:
- an "http" global option for HTTP/2 endpoint configuration.
- command line options to set http or https port numbers by
specifying -p http=PORT or -p https=PORT. (NOTE: this change
only affects syntax; specifying HTTP and HTTPS ports on the
command line currently has no effect.)
- named.conf options "http-port" and "https-port"
- HTTPSPORT environment variable for use when running tests.
Add support for a "tls" key/value pair for zone primaries, referencing
either a "tls" configuration statement or "ephemeral". If set to use
TLS, zones will send SOA and AXFR/IXFR queries over a TLS channel.
The 'filter-aaaa', 'filter-aaaa-on-v4', and 'filter-aaaa-on-v6' options
are replaced by the filter-aaaa plugin. This plugin was introduced in
9.13.5 and so it is safe to remove the named.conf options.
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
Parse the configuration of tls objects into SSL_CTX* objects. Listen on
DoT if 'tls' option is setup in listen-on directive. Use DoT/DoH ports
for DoT/DoH.
This commit adds stub parser support and tests for:
- "tls" statement, specifying key and cert.
- an optional "tls" keyvalue in listen-on statements for DoT
configuration.
Documentation for these options has also been added to the ARM, but
needs further work.
No issues with the glue cache feature have been reported since its
introduction in BIND 9.12. As the rationale for introducing the
"glue-cache" option was to have a safety switch readily available in
case the glue cache turns out to cause problems, it is time to deprecate
the option. Glue cache will be permanently enabled in a future release,
at which point the "glue-cache" option will be made obsolete.
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
it is now an error to have two primaries lists with the same
name. this is true regardless of whether the "primaries" or
"masters" keywords were used to define them.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
The files in doc/misc requires all the BIND 9 libraries to be built
before the documentation can be built. One of the extra automake
features is maintainer mode that allows to conditionally build and clean
files that require special tools. Make use of the automake maintainer
mode to not rebuild the files in doc/misc under normal circumstances.
The doc/misc/options is used to generate a file describing all
configuration options. Currently, the file contents could differ
based on ./configure option which is kind of suboptimal.
We already removed the "// not configured" from the options.active, and
this time we remove generation of the string altogether.
Make various adjustments necessary to enable "make dist" to build a BIND
source tarball whose contents are complete enough to build binaries, run
unit & system tests, and generate documentation on Unix systems.
Known outstanding issues:
- "make distcheck" does not work yet.
- Tests do not work for out-of-tree source-tarball-based builds.
- Source tarballs are not complete enough for building on Windows.
All of the above will be addressed in due course.
The ARM and the manpages have been converted into Sphinx documentation
format.
Sphinx uses reStructuredText as its markup language, and many of its
strengths come from the power and straightforwardness of
reStructuredText and its parsing and translating suite, the Docutils.
Change 5332 renamed "dnssec-keys" configuration statement to the
more descriptive "trust-anchors". Not all occurrences in the
documentation had been updated.
The keyword 'unlimited' can be used instead of PT0S which means the
same but is more comprehensible for users.
Also fix some redundant "none" parameters in the kasp test.
When doing rollover in a timely manner we need to have access to the
relevant kasp configured durations.
Most of these are simple get functions, but 'dns_kasp_signdelay'
will calculate the maximum time that is needed with this policy to
resign the complete zone (taking into account the refresh interval
and signature validity).
Introduce parent-propagation-delay, parent-registration-delay,
parent-ds-ttl, zone-max-ttl, zone-propagation-delay.
This commit introduces the initial `dnssec-policy` configuration
statement. It has an initial set of options to deal with signature
and key maintenance.
Add some checks to ensure that dnssec-policy is configured at the
right locations, and that policies referenced to in zone statements
actually exist.
Add some checks that when a user adds the new `dnssec-policy`
configuration, it will no longer contain existing DNSSEC
configuration options. Specifically: `inline-signing`,
`auto-dnssec`, `dnssec-dnskey-kskonly`, `dnssec-secure-to-insecure`,
`update-check-ksk`, `dnssec-update-mode`, `dnskey-sig-validity`,
and `sig-validity-interval`.
Test a good kasp configuration, and some bad configurations.
- this required modification to the code that generates grammar text for
the documentation, because the "dnssec-lookaside" option spanned more
than one line in doc/misc/options, so grepping out only the lines
marked "// obsolete" didn't remove the whole option. this commit adds
an option to cfg_test to print named.conf clauses only if they don't
have the obsolete, ancient, test-only, or not-yet-implemented flags
set.
This commit changes the BIND cookie algorithms to match
draft-sury-toorop-dnsop-server-cookies-00. Namely, it changes the Client Cookie
algorithm to use SipHash 2-4, adds the new Server Cookie algorithm using SipHash
2-4, and changes the default for the Server Cookie algorithm to be siphash24.
Add siphash24 cookie algorithm, and make it keep legacy aes as
The 'managed-keys' (and 'trusted-keys') options have been deprecated
by 'dnssec-keys'. Some documentation references to 'managed-keys'
had not yet been marked or noted as such.
- change references to trusted-keys to dnssec-keys with static-key
- rebuild doc/misc/options and other generated grammar doc
- add a "see MANAGED-KEYS" note when building named.conf.docbook
removed the SDB databases in contrib/sdb as they hadn't been
maintained in some time, and were no longer able to link to named
without modification. also:
- cleaned up contrib/README, which still referred to contrib
subdirectores that were removed already, and linked to an obsolete URL.
- removed references to sdb in doc/misc/roadmap and doc/misc/sdb.
- options that were flagged as obsolete or not implemented in 9.0.0
are now flagged as "ancient", and are a fatal error
- the ARM has been updated to remove these, along with other
obsolete descriptions of BIND 8 behavior
- the log message for obsolete options explicitly recommends removal
- added a 'hookdata' array to qctx to store pointers to up to
16 blobs of data which are allocated by modules as needed.
each module is assigned an ID number as it's loaded, and this
is the index into the hook data array. this is to be used for
holding persistent state between calls to a hook module for a
specific query.
- instead of using qctx->filter_aaaa, we now use qctx->hookdata.
(this was the last piece of filter-aaaa specific code outside the
module.)
- added hook points for qctx initialization and destruction. we get
a filter-aaaa data pointer from the mempool when initializing and
store it in the qctx->hookdata table; return to to the mempool
when destroying the qctx.
- link the view to the qctx so that detaching the client doesn't cause
hooks to fail
- added a qctx_destroy() function which must be called after qctx_init;
this calls the QCTX_DESTROY hook and detaches the view
- general cleanup and comments
Contrary to what the documentation states, the "server-addresses"
static-stub zone option does not accept custom port numbers. Fix the
configuration type used by the "server-addresses" option to ensure
documentation matches source code. Remove a check_zoneconf() test which
is unnecessary with this fix in place.
- added new 'validate-except' option, which configures an NTA with
expiry of 0xffffffff. NTAs with that value in the expiry field do not
expire, are are not written out when saving the NTA table and are not
dumped by rndc secroots
4873. [doc] Grammars for named.conf included in the ARM are now
automatically generated by the configuration parser
itself. As a side effect of the work needed to
separate zone type grammars from each other, this
also makes checking of zone statements in
named-checkconf more correct and consistent.
[RT #36957]
