There are leftovers from the previous refactoring effort, which left
some function declarations and comments in the header file unchanged.
Finish the renaming.
(cherry picked from commit 580ef2e18f)
Instead of holding the catzs->lock the whole time we process the catz
update, only hold it for hash table lookup and then release it. This
should unblock any other threads that might be processing updates to
catzs triggered by extra incoming transfer.
(cherry picked from commit b1cd4a066a)
Offload catalog zone processing so that the network manager threads
are not interrupted by a large catalog zone update.
Introduce a new 'updaterunning' state alongside with 'updatepending',
like it is done in the RPZ module.
Note that the dns__catz_update_cb() function currently holds the
catzs->lock during the whole process, which is far from being optimal,
but the issue is going to be addressed separately.
(cherry picked from commit 0b96c9234f)
This change should make sure that catalog zone update processing
doesn't happen when the catalog zone is being shut down. This
should help avoid races when offloading the catalog zone updates
in the follow-up commit.
(cherry picked from commit 246b7084d6)
* Change 'dns_catz_new_zones()' function's prototype (the order of the
arguments) to synchronize it with the similar function in rpz.c.
* Rename 'refs' to 'references' in preparation of ISC_REFCOUNT_*
macros usage for reference tracking.
* Unify dns_catz_zone_t naming to catz, and dns_catz_zones_t naming to
catzs, following the logic of similar changes in rpz.c.
* Use C compound literals for structure initialization.
* Synchronize the "new zone version came too soon" log message with the
one in rpz.c.
* Use more of 'sizeof(*ptr)' style instead of the 'sizeof(type_t)' style
expressions when allocating or freeing memory for 'ptr'.
(cherry picked from commit 8cb79fec9d)
The dns_rpz_zones structure was using .refs and .irefs for strong and
weak reference counting. Rewrite the unit to use just a single
reference counting + shutdown sequence (dns_rpz_destroy_rpzs) that must
be called by the creator of the dns_rpz_zones_t object. Remove the
reference counting from the dns_rpz_zone structure as it is not needed
because the zone objects are fully embedded into the dns_rpz_zones
structure and dns_rpz_zones_t object must never be destroyed before all
dns_rpz_zone_t objects.
The dns_rps_zones_t reference counting uses the new ISC_REFCOUNT_TRACE
capability - enable by defining DNS_RPZ_TRACE in the dns/rpz.h header.
Additionally, add magic numbers to the dns_rpz_zone and dns_rpz_zones
structures.
(cherry picked from commit 77659e7392)
Previously, the RPZ updates ran quantized on the main nm_worker loops.
As the quantum was set to 1024, this might lead to service
interruptions when large RPZ update was processed.
Change the RPZ update process to run as the offloaded work. The update
and cleanup loops were refactored to do as little locking of the
maintenance lock as possible for the shortest periods of time and the db
iterator is being paused for every iteration, so we don't hold the rbtdb
tree lock for prolonged periods of time.
(cherry picked from commit f106d0ed2b)
Previously dns_rpz_add() were passed dns_rpz_zones_t and index to .zones
array. Because we actually attach to dns_rpz_zone_t, we should be using
the local pointer instead of passing the index and "finding" the
dns_rpz_zone_t again.
Additionally, dns_rpz_add() and dns_rpz_delete() were used only inside
rpz.c, so make them static.
(cherry picked from commit b6e885c97f)
Do a general cleanup of lib/dns/rpz.c style:
* Removed deprecated and unused functions
* Unified dns_rpz_zone_t naming to rpz
* Unified dns_rpz_zones_t naming to rpzs
* Add and use rpz_attach() and rpz_attach_rpzs() functions
* Shuffled variables to be more local (cppcheck cleanup)
(cherry picked from commit 840179a247)
isc_bind9 was a global bool used to indicate whether the library
was being used internally by BIND or by an external caller. external
use is no longer supported, but the variable was retained for use
by dyndb, which needed it only when being built without libtool.
building without libtool is *also* no longer supported, so the variable
can go away.
(cherry picked from commit 935879ed11)
Instead of using an extra rarely-used paramater to dns_clientinfo_init()
to set ECS information for a client, this commit adds a function
dns_clientinfo_setecs() which can be called only when ECS is needed.
(cherry picked from commit ff3fdaa424)
Include isc_rwlocktype_t type definition in zt.h
See merge request isc-projects/bind9!7376
(cherry picked from commit d7bcdf8bd6)
395d6fca Include isc_rwlocktype_t type definition in zt.h
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
(cherry picked from commit 916ea26ead)
With 'stale-answer-enable yes;' and 'stale-answer-client-timeout off;',
consider the following situation:
A CNAME record and its target record are in the cache, then the CNAME
record expires, but the target record is still valid.
When a new query for the CNAME record arrives, and the query fails,
the stale record is used, and then the query "restarts" to follow
the CNAME target. The problem is that the query's multiple stale
options (like DNS_DBFIND_STALEOK) are not reset, so 'query_lookup()'
treats the restarted query as a lookup following a failed lookup,
and returns a SERVFAIL answer when there is no stale data found in the
cache, even if there is valid non-stale data there available.
With this change, query_lookup() now considers non-stale data in the
cache in the first place, and returns it if it is available.
(cherry picked from commit 91a1a8efc5)
The dispatches are not thread-bound, and used freely between various
threads (see the dns_resolver and dns_request units for details).
This refactoring make sure that all non-const dns_dispatch_t and
dns_dispentry_t members are accessed under a lock, and both object now
track their internal state (NONE, CONNECTING, CONNECTED, CANCELED)
instead of guessing the state from the state of various struct members.
During the refactoring, the artificial limit DNS_DISPATCH_SOCKSQUOTA on
UDP sockets per dispatch was removed as the limiting needs to happen and
happens on in dns_resolver and limiting the number of UDP sockets
artificially in dispatch could lead to unpredictable behaviour in case
one dispatch has the limit exhausted by others are idle.
The TCP artificial limit of DNS_DISPATCH_MAXREQUESTS makes even less
sense as the TCP connections are only reused in the dns_request API
that's not a heavy user of the outgoing connections.
As a side note, the fact that UDP and TCP dispatch pretends to be same
thing, but in fact the connected UDP is handled from dns_dispentry_t and
dns_dispatch_t acts as a broker, but connected TCP is handled from
dns_dispatch_t and dns_dispatchmgr_t acts as a broker doesn't really
help the clarity of this unit.
This refactoring kept to API almost same - only dns_dispatch_cancel()
and dns_dispatch_done() were merged into dns_dispatch_done() as we need
to cancel active netmgr handles in any case to not leave dangling
connections around. The functions handling UDP and TCP have been mostly
split to their matching counterparts and the dns_dispatch_<function>
functions are now thing wrappers that call <udp|tcp>_dispatch_<function>
based on the socket type.
More debugging-level logging was added to the unit to accomodate for
this fact.
(cherry picked from commit 6f317f27ea)
'DNS_DB_STALEOK' returns stale rdatasets as well as current rdatasets.
'DNS_DB_EXPIREDOK' returns expired rdatasets as well as current
rdatasets. This option is currently only set when DNS_DB_STALEOK is
also set.
(cherry picked from commit 85048ddeee)
Add an options parameter to control what rdatasets are returned when
iteratating over the node. Specific modes will be added later.
(cherry picked from commit 7695c36a5d)
dns_db_updatenotify_unregister needed to be called earlier to ensure
that listener->onupdate_arg always points to a valid object. The
existing lazy cleanup in rbtdb_free did not ensure that.
(cherry picked from commit 35839e91d8)
Duplicate dns_db_updatenotify_register registrations need to be
suppressed to ensure that dns_db_updatenotify_unregister is successful.
(cherry picked from commit f13e71e551)
The aim is to do less work per byte:
* Check the bounds for each label, instead of checking the
bounds for each character.
* Instead of copying one character at a time from the wire to
the name, copy entire runs of sequential labels using memmove()
to make the most of its fast loop.
* To remember where the name ends, we only need to set the end
marker when we see a compression pointer or when we reach the
root label. There is no need to check if we jumped back and
conditionally update the counter for every character.
* To parse a compression pointer, we no longer take a diversion
around the outer loop in between reading the upper byte of the
pointer and the lower byte.
* The parser state machine is now implicit in the instruction
pointer, instead of being an explicit variable. Similarly,
when we reach the root label we break directly out of the loop
instead of setting a second state machine variable.
* DNS_NAME_DOWNCASE is never used with dns_name_fromwire() so
that option is no longer supported.
I have removed this comment which dated from January 1999 when
dns_name_fromwire() was first introduced:
/*
* Note: The following code is not optimized for speed, but
* rather for correctness. Speed will be addressed in the future.
*/
No functional change, apart from removing support for the unused
DNS_NAME_DOWNCASE option. The new code is about 2x faster than the
old code: best case 11x faster, worst case 1.4x faster.
There were a number of places where the zone table should have been
locked, but wasn't, when dns_zt_apply was called.
Added a isc_rwlocktype_t type parameter to dns_zt_apply and adjusted
all calls to using it. Removed locks in callers.
(cherry picked from commit f053d5b414)
The HMACs and GSSAPI are just using unallocated values.
Moving them around shouldn't cause issues.
Only the dnssec system test knew the internal number in use for hmacmd5.
(cherry picked from commit 09f7e0607a)
When fuzzing it is useful for all signing operations to happen
at a specific time for reproducability. Add two variables to
the message structure (fuzzing and fuzztime) to specify if a
fixed time should be used and the value of that time.
(cherry picked from commit 3e85d8c3d6)
dns_request_create() was a front-end to dns_request_createvia() that
was only used by test binaries. dns_request_createvia() has been
renamed to dns_request_create(), and the test programs that formerly
used dns_request_create() have been updated to use the new parameters.
(cherry picked from commit ebf7b31aa3)
It is possible to bypass Response Rate Limiting (RRL)
`responses-per-second` limitation using specially crafted wildcard
names, because the current implementation, when encountering a found
DNS name generated from a wildcard record, just strips the leftmost
label of the name before making a key for the bucket.
While that technique helps with limiting random requests like
<random>.example.com (because all those requests will be accounted
as belonging to a bucket constructed from "example.com" name), it does
not help with random names like subdomain.<random>.example.com.
The best solution would have been to strip not just the leftmost
label, but as many labels as necessary until reaching the suffix part
of the wildcard record from which the found name is generated, however,
we do not have that information readily available in the context of RRL
processing code.
Fix the issue by interpreting all valid wildcard domain names as
the zone's origin name concatenated to the "*" name, so they all will
be put into the same bucket.
(cherry picked from commit baa9698c9d)
When doing a dnssec-policy reconfiguration from a zone with NSEC only
keys to a zone that uses NSEC3, figure out to wait with building the
NSEC3 chain.
Previously, BIND 9 would attempt to sign such a zone, but failed to
do so because the NSEC3 chain conflicted with existing DNSKEY records
in the zone that were not compatible with NSEC3.
There exists logic for detecting such a case in the functions
dnskey_sane() (in lib/dns/zone.c) and check_dnssec() (in
lib/ns/update.c). Both functions look very similar so refactor them
to use the same code and call the new function (called
dns_zone_check_dnskey_nsec3()).
Also update the dns_nsec_nseconly() function to take an additional
parameter 'diff' that, if provided, will be checked whether an
offending NSEC only DNSKEY will be deleted from the zone. If so,
this key will not be considered when checking the zone for NSEC only
DNSKEYs. This is needed to allow a transition from an NSEC zone with
NSEC only DNSKEYs to an NSEC3 zone.
(cherry picked from commit 09a81dc84ce0fee37442f03cdbd63c2398215376)
We do this by adding callbacks for when a node is added or deleted
from the keytable. dns_keytable_add and dns_keytable_delete where
extended to take a callback. dns_keytable_deletekey does not remove
the node so it was not extended.
(cherry picked from commit a5b57ed293)
When namespace is grafted on, the DNSSEC proofs for non existance
need to come from that namespace and not a higher namespace. We
add 3 function dns_view_sfd_add, dns_view_sfd_del and dns_view_sfd_find
to add, remove and find the namespace that should be used when
checking NSEC records.
dns_view_sfd_add adds a name to a tree, creating the tree if needed.
If the name already existed in the tree the reference count is
increased otherwise it is initalised to 1.
dns_view_sfd_del removes a reference to a name in the tree, if the
count goes to 0 the node is removed.
dns_view_sfd_find returns the namespace to be used to entered name.
If there isn't an enclosing name in the tree, or the tree does not
yet exist, the root name is returned.
Access to the tree is controlled by a read/write lock.
(cherry picked from commit 3619cad141)
Update the defaultconf with the built-in policies. These will now be
printed with "named -C".
Change the defines in kasp.h to be strings, so they can be concatenated
in the defaultconf. This means when creating a kasp structure, we no
longer initialize the defaults (this is fine because only kaspconf.c
uses dns_kasp_create() and it inherits from the default policy).
In kaspconf.c, the default values now need to be parsed from string.
Introduce some variables so we don't need to do get_duration multiple
times on the same configuration option.
Finally, clang-format-14 decided to do some random formatting changes.
(cherry picked from commit 5ff414e986)
The conversion of `DNS_R_PARTIALMATCH` into `DNS_R_NOTFOUND` is done
in the `dns_rbt_deletename()` function so there is no need to do that
in `dns_fwdtable_delete()`.
Add a possible return value of `ISC_R_NOSPACE` into the header file's
function description comment.
(cherry picked from commit 887aa7a290)
When processing a catalog zone member zone make sure that there is no
configured pre-existing forward zone with that name.
Refactor the `dns_fwdtable_find()` function to not alter the
`DNS_R_PARTIALMATCH` result (coming from `dns_rbt_findname()`) into
`DNS_R_SUCCESS`, so that now the caller can differentiate partial
and exact matches. Patch the calling sites to expect and process
the new return value.
(cherry picked from commit 2aff264fb1)
Add a new parameter to the dst_key structure, mark a key modified if
dst_key_(un)set[bool,num,state,time] is called. Only write out key
files during a keymgr run if the metadata has changed.
(cherry picked from commit 1da91b3ab4)
In order to modify the .localhost and .localnets members of the
dns_aclenv, all other processing on the netmgr loops needed to be
stopped using the task exclusive mode. Add the isc_rwlock to the
dns_aclenv, so any modifications to the .localhost and .localnets can be
done under the write lock.
(cherry picked from commit 8138a595d9)
Catalog zones change of ownership is special mechanism to facilitate
controlled migration of a member zone from one catalog to another.
It is implemented using catalog zones property named "coo" and is
documented in DNS catalog zones draft version 5 document.
Implement the feature using a new hash table in the catalog zone
structure, which holds the added "coo" properties for the catalog zone
(containing the target catalog zone's name), and the key for the hash
table being the member zone's name for which the "coo" property is being
created.
Change some log messages to have consistent zone name quoting types.
Update the ARM with change of ownership documentation and usage
examples.
Add tests which check newly the added features.
(cherry picked from commit bb837db4ee)
Update the function that synchronizes the CDS and CDNSKEY DELETE
records. It now allows for the possibility that the CDS DELETE record
is published and the CDNSKEY DELETE record is not, and vice versa.
Also update the code in zone.c how 'dns_dnssec_syncdelete()' is called.
With KASP, we still maintain the DELETE records our self. Otherwise,
we publish the CDS and CDNSKEY DELETE record only if they are added
to the zone. We do still check if these records can be signed by a KSK.
This change will allow users to add a CDS and/or CDNSKEY DELETE record
manually, without BIND removing them on the next zone sign.
Note that this commit removes the check whether the key is a KSK, this
check is redundant because this check is also made in
'dst_key_is_signing()' when the role is set to DST_BOOL_KSK.
(cherry picked from commit 3d05c99abb)
Previously, the RPZ updates ran quantized on the main nm_worker loops.
As the quantum was set to 1024, this might lead to service
interruptions when large RPZ update was processed.
Change the RPZ update process to run as the offloaded work. The update
and cleanup loops were refactored to do as little locking of the
maintenance lock as possible for the shortest periods of time and the db
iterator is being paused for every iteration, so we don't hold the rbtdb
tree lock for prolonged periods of time.
(cherry picked from commit f106d0ed2b)
Previously dns_rpz_add() were passed dns_rpz_zones_t and index to .zones
array. Because we actually attach to dns_rpz_zone_t, we should be using
the local pointer instead of passing the index and "finding" the
dns_rpz_zone_t again.
Additionally, dns_rpz_add() and dns_rpz_delete() were used only inside
rpz.c, so make them static.
(cherry picked from commit b6e885c97f)
Do a general cleanup of lib/dns/rpz.c style:
* Removed deprecated and unused functions
* Unified dns_rpz_zone_t naming to rpz
* Unified dns_rpz_zones_t naming to rpzs
* Add and use rpz_attach() and rpz_attach_rpzs() functions
* Shuffled variables to be more local (cppcheck cleanup)
(cherry picked from commit 840179a247)
Previously, the function(s) in the commit subject could fail for various
reasons - mostly allocation failures, or other functions returning
different return code than ISC_R_SUCCESS. Now, the aforementioned
function(s) cannot ever fail and they would always return ISC_R_SUCCESS.
Change the function(s) to return void and remove the extra checks in
the code that uses them.
(cherry picked from commit d128656d2e)
the addition of support for ECS client information in DLZ
modules omitted some necessary changes to build modules
in contrib.
(cherry picked from commit d3fed6f400)
