Reusing TCP connections with dns_dispatch_gettcp() used linear linked
list to lookup existing outgoing TCP connections that could be reused.
Replace the linked list with per-loop cds_lfht hashtable to speedup the
lookups. We use cds_lfht because it allows non-unique node insertion
that we need to check for dispatches in different connection states.
Instead of high number of dispatches (4 * named_g_udpdisp)[1], make the
dispatches bound to threads and make dns_dispatchset_t create a dispatch
for each thread (event loop).
This required couple of other changes:
1. The dns_dispatch_createudp() must be called on loop, so the isc_tid()
is already initialized - changes to nsupdate and mdig were required.
2. The dns_requestmgr had only a single dispatch per v4 and v6. Instead
of using single dispatch, use dns_dispatchset_t for each protocol -
this is same as dns_resolver.
Add a configuration option, resolver-use-dns64, which when true
will cause named to map IPv4 address to IPv6 addresses using the
view's DNS64 mapping rules when making iterative queries.
There are libraries which are reported in printversion(), but not
reported in setup(). Synchronize the functions, so that the log
file could have the same information as reported by the 'named -V'
command execution.
The autoconf and named -V now prints used version of jemalloc. This
doesn't work with system supplied jemalloc, so in it prints `system`
instead in the autoconf and nothing in named -V output.
instead of allowing a NULL nametree in dns_nametree_covered(),
require nametree to exist, and ensure that the nametrees defined
for view and resolver objects are always created.
name trees can now hold either boolean values or bit fields. the
type is selected when the name tree is created.
the behavior of dns_nametree_add() differs slightly beteween the types:
in a boolean tree adding an existing name will return ISC_R_EXISTS,
but in a bitfield tree it simply sets the specified bit in the bitfield
and returns ISC_R_SUCCESS.
replace the use of RBTs for deny-answer-aliases, the exclude
lists for deny-answer-aliases and deny-answer-addresses, and
dnssec-must-be-secure, with name trees.
This adds support for User Statically Defined Tracing (USDT). On
Linux, this uses the header from SystemTap and dtrace utility, but the
support is universal as long as dtrace is available.
Also add the required infrastructure to add probes to libisc, libdns and
libns libraries, where most of the probes will be.
The dns_dispatchmgr object was only set in the dns_view object making it
prone to use-after-free in the dns_xfrin unit when shutting down named.
Remove dns_view_setdispatchmgr() and optionally pass the dispatchmgr
directly to dns_view_create() when it is attached and not just assigned,
so the dns_dispatchmgr doesn't cease to exist too early.
The dns_view_getdnsdispatchmgr() is now protected by the RCU lock, the
dispatchmgr reference is incremented, so the caller needs to detach from
it, and the function can return NULL in case the dns_view has been
already shut down.
Instead of an RBT for the forwarders table, use a QP trie.
We now use reference counting for dns_forwarders_t. When a forwarders
object is retrieved by dns_fwdtable_find(), it must now be explicitly
detached by the caller afterward.
QP tries require stored objects to include their names, so the
the forwarders object now has that. This obviates the need to
pass back a separate 'foundname' value from dns_fwdtable_find().
replace the red-black tree used by the negative trust anchor table
with a QP trie.
because of this change, dns_ntatable_init() can no longer fail, and
neither can dns_view_initntatable(). these functions have both been
changed to type void.
Allow larger TTL values in zones that go insecure. This is necessary
because otherwise the zone will not be loaded due to the max-zone-ttl
of P1D that is part of the current insecure policy.
In the keymgr.c code, default back to P1D if the max-zone-ttl is set
to zero.
Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
The isc_stats_create() can no longer return anything else than
ISC_R_SUCCESS. Refactor isc_stats_create() and its variants in libdns,
libns and named to just return void.
1. Change the _new, _add and _copy functions to return the new object
instead of returning 'void' (or always ISC_R_SUCCESS)
2. Cleanup the isc_ht_find() + isc_ht_add() usage - the code is always
locked with catzs->lock (mutex), so when isc_ht_find() returns
ISC_R_NOTFOUND, the isc_ht_add() must always succeed.
3. Instead of returning direct iterator for the catalog zone entries,
add dns_catz_zone_for_each_entry2() function that calls callback
for each catalog zone entry and passes two extra arguments to the
callback. This will allow changing the internal storage for the
catalog zone entries.
4. Cleanup the naming - dns_catz_<fn>_<obj> -> dns_catz_<obj>_<fn>, as an
example dns_catz_new_zone() gets renamed to dns_catz_zone_new().
These two configuration options worked in conjunction with 'auto-dnssec'
to determine KSK usage, and thus are now obsoleted.
However, in the code we keep KSK processing so that when a zone is
reconfigured from using 'dnssec-policy' immediately to 'none' (without
going through 'insecure'), the zone is not immediately made bogus.
Add one more test case for going straight to none, now with a dynamic
zone (no inline-signing).
Some 'rndc signing' commands can still be used in conjunction with
'dnssec-policy' because it shows the progress of signing and
private type records can be cleaned up. Allow these commands to be
executed.
However, setting NSEC3 parameters is incompatible with dnssec-policy.
BIND's rdataset structure is a view of some DNS records. It is
polymorphic, so the details of how the records are stored can vary.
For instance, the records can be held in an rdatalist, or in an
rdataslab in the rbtdb.
The dns_rdataset structure previously had a number of fields called
`private1` up to `private7`, which were used by the various rdataset
implementations. It was not at all clear what these fields were for,
without reading the code and working it out from context.
This change makes the rdataset inheritance hierarchy more clear. The
polymorphic part of a `struct dns_rdataset` is now a union of structs,
each of which is named for the class of implementation using it. The
fields of these structs replace the old `privateN` fields. (Note: the
term "inheritance hierarchy" refers to the fact that the builtin and
SDLZ implementations are based on and inherit from the rdatalist
implementation, which in turn inherits from the generic rdataset.
Most of this change is mechanical, but there are a few extras.
In keynode.c there were a number of REQUIRE()ments that were not
necessary: they had already been checked by the rdataset method
dispatch code. On the other hand, In ncache.c there was a public
function which needed to REQUIRE() that an rdataset was valid.
I have removed lots of "reset iterator state" comments, because it
should now be clear from `target->iter = NULL` where before
`target->private5 = NULL` could have been doing anything.
Initialization is a bit neater in a few places, using C structure
literals where appropriate.
The pointer arithmetic for translating between an rdataslab header and
its raw contents is now fractionally safer.
The ability to read legacy HMAC-MD5 K* keyfile pairs using algorithm
number 157 was accidentally lost when the algorithm numbers were
consolidated into a single block, in commit
09f7e0607a.
The assumption was that these algorithm numbers were only known
internally, but they were also used in key files. But since HMAC-MD5
got renumbered from 157 to 160, legacy HMAC-MD5 key files no longer
work.
Move HMAC-MD5 back to 157 and GSSAPI back to 160. Add exception for
GSSAPI to list_hmac_algorithms.
view->adb may be referenced while the view is shutting down as the
zone uses a weak reference to the view and examines view->adb but
dns_view_detach call dns_adb_detach to clear view->adb.
since it is not necessary to find partial matches when looking
up names in a TSIG keyring, we can use a hash table instead of
an RBT to store them.
the tsigkey object now stores the key name as a dns_fixedname
rather than allocating memory for it.
the `name` parameter to dns_tsigkeyring_add() has been removed;
it was unneeded since the tsigkey object already contains a copy
of the name.
the opportunistic cleanup_ring() function has been removed;
it was only slowing down lookups.
the prior practice of passing a dns_name containing the
expanded name of an algorithm to dns_tsigkey_create() and
dns_tsigkey_createfromkey() is unnecessarily cumbersome;
we can now pass the algorithm number instead.
use the ISC_REFCOUNT attach/detach implementation in dns/tsig.c
so that detailed tracing can be used during refactoring.
dns_tsig_keyring_t has been renamed dns_tsigkeyring_t so the type
and the attach/detach function names will match.
- style cleanups.
- simplify the function parameters to dns_tsigkey_create():
+ remove 'restored' and 'generated', they're only ever set to false.
+ remove 'creator' because it's only ever set to NULL.
+ remove 'inception' and 'expiry' because they're only ever set to
(0, 0) or (now, now), and either way, this means "never expire".
+ remove 'ring' because we can just use dns_tsigkeyring_add() instead.
- rename dns_keyring_restore() to dns_tsigkeyring_restore() to match the
rest of the functions operating on dns_tsigkeyring objects.
it was possible to add a TSIG key to more than one TSIG
keyring at a time, and this was in fact happening with the
session key, which was generated once and then added to the
keyrings for each view as it was configured.
this has been corrected and a REQUIRE added to dns_tsigkeyring_add()
to prevent it from happening again.
The 'named_g_server->interfacemgr' pointer is saved in the zone
structure using dns_zone_setisself(), as a void* argument to be
passed to the isself() callback, so there is no attach/detach,
and when shutting down, the interface manager can be destroyed
by the shutdown_server(), running in exclusive mode, and causing
isself() to crash when trying to use the pointer.
Instead of keeping the interface manager pointer in the zone
structure, just check and use the 'named_g_server->interfacemgr'
itself, as it was implemented originally in the
3aca8e5bf3 commit. Later, in the
8eb88aafee commit, the code was
changed to pass the interface manager pointer using the additional
void* argument, but the commit message doesn't mention if there
was any practical reason for that.
Additionally, don't pass the interfacemgr pointer to the
ns_interfacemgr_getaclenv() function before it is checked
against NULL.
'-T transferinsecs' makes named interpret the max-transfer-time-out,
max-transfer-idle-out, max-transfer-time-in and max-transfer-idle-in
configuration options as seconds instead of minutes.
'-T transferslowly' makes named to sleep for one second for every
xfrout message.
'-T transferstuck' makes named to sleep for one minute for every
xfrout message.
When shutting down TCP sockets, the read callback calling logic was
flawed, it would call either one less callback or one extra. Fix the
logic in the way:
1. When isc_nm_read() has been called but isc_nm_read_stop() hasn't on
the handle, the read callback will be called with ISC_R_CANCELED to
cancel active reading from the socket/handle.
2. When isc_nm_read() has been called and isc_nm_read_stop() has been
called on the on the handle, the read callback will be called with
ISC_R_SHUTTINGDOWN to signal that the dormant (not-reading) socket
is being shut down.
3. The .reading and .recv_read flags are little bit tricky. The
.reading flag indicates if the outer layer is reading the data (that
would be uv_tcp_t for TCP and isc_nmsocket_t (TCP) for TLSStream),
the .recv_read flag indicates whether somebody is interested in the
data read from the socket.
Usually, you would expect that the .reading should be false when
.recv_read is false, but it gets even more tricky with TLSStream as
the TLS protocol might need to read from the socket even when sending
data.
Fix the usage of the .recv_read and .reading flags in the TLSStream
to their true meaning - which mostly consist of using .recv_read
everywhere and then wrapping isc_nm_read() and isc_nm_read_stop()
with the .reading flag.
4. The TLS failed read helper has been modified to resemble the TCP code
as much as possible, clearing and re-setting the .recv_read flag in
the TCP timeout code has been fixed and .recv_read is now cleared
when isc_nm_read_stop() has been called on the streaming socket.
5. The use of Network Manager in the named_controlconf, isccc_ccmsg, and
isc_httpd units have been greatly simplified due to the improved design.
6. More unit tests for TCP and TLS testing the shutdown conditions have
been added.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Artem Boldariev <artem@isc.org>
isc_loopmgr_pause can't be called before isc_loopmgr_run is
called as the thread ids are not yet valid. If there is a
fatal error before isc_loopmgr_run is run then don't call
isc_loopmgr_pause.
