Reproduce the assertion by configuring a 'named' resolver with
'recursive-clients 10;' configuration option and running 20
queries is parallel.
Also tweak the 'ans2/ans.pl' to simulate a 50ms network latency
when qname starts with "latency". This makes sure that queries
running in parallel don't get served immediately, thus allowing
the configured recursive clients quota limitation to be activated.
(cherry picked from commit 4b52b0b4a9)
The faulty "DLZ" configuration triggers a reconfiguration failure
in such a place where view reverting code is covered.
(cherry picked from commit 95f4bac002)
bin/tests/system/get_algorithms.py:225:4: R1720: Unnecessary "else" after "raise", remove the "else" and de-indent the code inside it (no-else-raise)
(cherry picked from commit 8064ac6bec)
Include MD5 feature detection in featuretest tool and use it in some
places. When RHEL distribution or Fedora ELN is in FIPS mode, then MD5
algorithm is unavailable completely and even hmac-md5 algorithm usage
will always fail. Work that around by checking MD5 works and if not,
skipping its usage.
Those changes were dragged as downstream patch bind-9.11-fips-tests.patch
in Fedora and RHEL.
(cherry picked from commit 6ad794a8cd)
Tests using diff to compare outputs of dig +short shall ignore lines
starting with ";". In dig +short output, such lines should only be
present for errors such as network issues. Since we utilize dig's
default timeout/retry mechanisms, these transitory issues should be
ignored and only the final output should be considered during the diff
comparison.
(cherry picked from commit bd1ef66f83)
This adds an island of trust that is reachable from the root
where the trust anchors are added to island.conf.
This add an island of trust that is not reachable from the root
where the trust anchors are added to private.conf.
(cherry picked from commit 41bdb5b9fe)
Occasionally, the allotted 10 seconds for the "running" line to appear
in log after named is started proved insufficient in CI, especially
during increased load. Give named up to 60 seconds to start up to
mitigate this issue.
(cherry picked from commit b8bb4233e8)
isc_bind9 was a global bool used to indicate whether the library
was being used internally by BIND or by an external caller. external
use is no longer supported, but the variable was retained for use
by dyndb, which needed it only when being built without libtool.
building without libtool is *also* no longer supported, so the variable
can go away.
(cherry picked from commit 935879ed11)
Send the test message from ns3 to ns2 instead of ns2 to ns3 as ns2
is started first and therefore the test doesn't have to wait on the
resend of the the NOTIFY message to be successful.
(cherry picked from commit e7e1f59a3a)
the nsupdate system test was intermittently failing due to the update
quota not being exceeded when it should have been. this is most likely
a timing issue: the client is sending updates too slowly, or the server
is processing them too quickly, for the quota to fill. this commit
attempts to make that the failure less likely by increasing the number
of update transactions from 10 to 20.
(cherry picked from commit 06b1faf068)
Following deleting the root trust anchor and reconfiguring the
server it takes some time to for trust anchor to appear in 'rndc
managed-keys status' output. Retry several times.
(cherry picked from commit 71dbd09796)
check in the log files of receiving servers that the originating
ports for notify and SOA query messages were set correctly from
configured notify-source and transfer-source options.
(cherry picked from commit 9cffd5c431)
Add 'port' token to deprecated.conf. Also add options
'use-v4-udp-ports', 'use-v6-udp-ports', 'avoid-v4-udp-ports',
and 'avoid-v6-udp-ports'.
All of these should trigger warnings (except when deprecation warnings
are being ignored).
(cherry picked from commit 531914e660)
Deprecate the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Also deprecate use-{v4,v6}-udp-ports and avoid-{v4,v6}udp-ports.
(cherry picked from commit 470ccbc8ed)
Set the DS state after issuing 'rndc dnssec -checkds'. If the DS
was published, it should go in RUMOURED state, regardless whether it
is already safe to do so according to the state machine.
Leaving it in HIDDEN (or if it was magically already in OMNIPRESENT or
UNRETENTIVE) would allow for easy shoot in the foot situations.
Similar, if the DS was withdrawn, the state should be set to
UNRETENTIVE. Leaving it in OMNIPRESENT (or RUMOURED/HIDDEN)
would also allow for easy shoot in the foot situations.
(cherry picked from commit ee42f66fbe)
Add a test case for a server that uses a resolver as an parental-agent.
We need two root servers, ns1 and ns10, one that delegates to the
'checkds' tld with the DS published (ns2), and one that delegates to
the 'checkds' tld with the DS removed (ns5). Both root zones are
being setup in the 'ns1/setup.sh' script.
We also need two resolvers, ns3 and ns8, that use different root hints
(one uses ns1 address as a hint, the other uses ns10).
Then add the checks to test_checkds.py is similar to the existing tests.
Update 'types' because for zones that have the DS withdrawn (or to be
withdrawn), the CDS and CDNSKEY records should not be published and
thus should not be in the NSEC bitmap.
(cherry picked from commit 0b9a9f9955)
The condition was accidentally reversed during refactoring in
9730ac4c56 . It would result in skipped
tests on builds with proper support and false negatives on builds
without proper feature support.
Credit for reporting the issue and the fix goes to Stanislav Levin.
(cherry picked from commit 473cb530f4)
Instead of using the current working directory to find the ifconfig.sh
script, look for the ifconfig.sh.in template in the directory where the
testsock.pl script is located. This enables the testsock.pl script to be
called from any working directory.
Using the ifconfig.sh.in template is sufficient, since it contains
the necessary information to be extracted: the max= value (which is
hard-coded in the template).
(cherry picked from commit e24d3b21d0)
Move the core dump detection functionality for system test runs into a
separate script. This enables reuse by the pytest runner. The
functionality remains the same.
(cherry picked from commit d9a97200d5)
Avoid creating any temporary files in the current workdir.
Additional/changing files in the bin/tests/system directory are
problematic for pytest/xdist collection phase, which assumes the list of
files doesn't change between the collection phase of the main pytest
thread and the subsequent collection phase of the xdist worker threads.
Since the testcrypto.sh is also called during pytest initialization
through conf.sh.common (to detect feature support), this could
occasionally cause a race condition when the list of files would be
different for the main pytest thread and the xdist worker.
(cherry picked from commit 61330a7863)
verify that updates are refused when the client is disallowed by
allow-query, and update forwarding is refused when the client is
is disallowed by update-forwarding.
verify that "too many DNS UPDATEs" appears in the log file when too
many simultaneous updates are processing.
(cherry picked from commit b91339b80e)
Previously, an incremental hash table resizing was implemented for the
dns_rbt_t hash table implementation. Using that as a base, also
implement the incremental hash table resizing also for isc_ht API
hashtables:
1. During the resize, allocate the new hash table, but keep the old
table unchanged.
2. In each lookup, delete, or iterator operation, check both tables.
3. Perform insertion operations only in the new table.
4. At each insertion also move <r> elements from the old table to
the new table.
5. When all elements are removed from the old table, deallocate it.
To ensure that the old table is completely copied over before the new
table itself needs to be enlarged, it is necessary to increase the
size of the table by a factor of at least (<r> + 1)/<r> during resizing.
In our implementation <r> is equal to 1.
The downside of this approach is that the old table and the new table
could stay in memory for longer when there are no new insertions into
the hash table for prolonged periods of time as the incremental
rehashing happens only during the insertions.
(cherry picked from commit e42cb1f198)
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
(cherry picked from commit 916ea26ead)
Prime the cache with the following records:
shortttl.cname.example. 1 IN CNAME longttl.target.example.
longttl.target.example. 600 IN A 10.53.0.2
Wait for the CNAME record to expire, disable the authoritative server,
and query 'shortttl.cname.example' again, expecting a stale answer.
(cherry picked from commit 537187bf2f)
This bug was masked in the tests because the `catz` test script did an
`rndc addzone` before an `rndc delzone`. The `addzone` autovivified
the NZF config, so `delzone` worked OK.
This commit swaps the order of two sections of the `catz` test script
so that it uses `delzone` before `addzone`, which provokes a crash
when `delzone` requires a non-NULL NZF config.
To fix the crash, we now try to remove the zone from the NZF config
only if it was dynamically added but not by a catalog zone.
(cherry picked from commit 9fa20d6f6c)
The pre-defined test cases use named.$TESTCASE.conf naming convention,
where TESTCASE is a human readable name contaning actual word(s). The
autogenerated test cases' names always start with a number from 1 to 6.
(cherry picked from commit e03daf22ec)
The ans*.pl scripts are part of system tests and should be part of the
repository. The gitignore entires for these files have been removed.
(cherry picked from commit b8616e457f)
bin/tests/system/rrsetorder/dig.out* files match a gitignore expression
present in bin/tests/system/.gitignore. Since these are meant to be
reference files that are compared to the files generated when the
"rrsetorder" system test is run, rename them to avoid listing tracked
files in .gitignore files.
(cherry picked from commit c5708044e7)
The test expects a "connection timed out" message from DiG when it
experiences a timeout, while the current version of DiG prints just
a "timed out" message, like below:
;; communications error to 10.53.0.1#11314: timed out
;; communications error to 10.53.0.1#11314: timed out
;; communications error to 10.53.0.1#11314: timed out
; <<>> DiG 9.19.9-dev <<>> -p 11314 +tries +time +tcp +tries +time @10.53.0.1 dropedns. TXT
; (1 server found)
;; global options: +cmd
;; no servers could be reached
Change the expected string to match the current DiG output.
Use the '-F' switch for "grep" for matching a fixed string.
(cherry picked from commit 35988748f3)
In order to have a common naming convention for system tests, rename the
only outlier "engine_pkcs11" to "enginepkcs11", which was the only
system test using an underscore in its name.
The only allowed word separators for system test names are either dash
or no separator.
(cherry picked from commit 62eea511db)
It is better to use consistent file names to avoid issue with sorting
etc.
Using underscore in filenames as opposed to dash was chosen because it
seems more common in pytest/python to use underscore for filenames.
Also rename the bin/tests/system/timeouts/tests-tcp.py file to
bin/tests/system/timeouts/tests_tcp_timeouts.py to avoid pytest name
collision (there can't be two files named tests_tcp.py).
(cherry picked from commit f6409ee6ac)
This introduces a Python dependency for running system tests. It is
needed in order to:
- write new test control scripts in Python
- gradually rewrite old Perl scripts into Python if needed
- eventually introduce pytest as the new test runner framework
This commit is not intended to be backported to 9.16.
(cherry picked from commit 56416ebd65)
This change has no practical impact, as Perl was already required for
all system tests, this check only makes it more explicit.
(cherry picked from commit 084d72d1d5)
Nothing from conf.sh.common is required to set these values. On the
contrary, a Python interpreter needs to be set in order to randomize the
algorithm set (which happens in conf.sh.common).
(cherry picked from commit 492992dca8)
When testcrypto.sh is used as a standalone script, always use quiet mode
to avoid using undefined commands (such as echo_i) which require
inclusion of the entire conf.sh machinery.
(cherry picked from commit ba35a6df9c)
To count pending queries in the statistics, we need the ns3 to be
misconfigured. Document the fact in the statistics/ns3/root.hints.
(cherry picked from commit 32c2acf6fc)
When the resolver was refactored, the statistics system test had to be
adjusted in c6b4d82557. Unfortunately,
this change had to be done because of an error in the resolver
refactoring where timeout would not retry next server, but keep trying
the same server. As we have now fixed this bug, revert the change to
the test back to the previous state.
(cherry picked from commit b679640950)
[bug] Changes to the RPZ response-policy min-update-interval
and add-soa options now take effect as expected when
named is reconfigured. [GL #3740]
(cherry picked from commit d8a3d328db)
Check that the SOA serial numbers printed when updating a catalog zone
is represented correctly for numbers bigger than 2^31.
(cherry picked from commit de232ab446)
This commit adds a simple check to the 'doth' system test which
ensures that session resumption when Mutual TLS is used works as
expected.
(cherry picked from commit d5d31c6ba1)
Add an options parameter to control what rdatasets are returned when
iteratating over the node. Specific modes will be added later.
(cherry picked from commit 7695c36a5d)
