Remove test cases that rely upon key and denial of existence
management operations triggered by dynamic updates.
The autosign system test needed a bit more care than just removing
because the test cases are dependent on each other, so there are some
additional tweaks such as setting the NSEC3PARAM via rndc signing,
and renaming zone input files. In the process, some additional
debug output files have been added, and a 'ret' fail case overwrite
was fixed.
Create a zone that triggers DNAME owner name checks in a zone that
is only reachable using a dual stack server. The answer contains
a name that is higher in the tree than the query name.
e.g.
foo.v4only.net. CNAME v4only.net.
v4only.net. A 10.0.0.1
ns4 is serving the test zone (ipv4-only)
ns6 is the root server for this test (dual stacked)
ns7 is acting as the dual stack server (dual stacked)
ns9 is the server under test (ipv6-only)
checkbashisms warns about possible reliance on HOSTNAME environmental
variable which Bash sets to the name of the current host, and some
commands may leverage it:
possible bashism in builtin/tests.sh line 199 ($HOST(TYPE|NAME)):
grep "^\"$HOSTNAME\"$" dig.out.ns1.$n > /dev/null || ret=1
possible bashism in builtin/tests.sh line 221 ($HOST(TYPE|NAME)):
grep "^\"$HOSTNAME\"$" dig.out.ns2.$n > /dev/null || ret=1
possible bashism in builtin/tests.sh line 228 ($HOST(TYPE|NAME)):
grep "^; NSID: .* (\"$HOSTNAME\")$" dig.out.ns2.$n > /dev/null || ret=1
We don't use the variable this way but rename it to HOST_NAME to silence
the tool.
"next_key_event_threshold" is assigned with
"next_key_event_threshold+i", but "i" is empty (never set, nor used
afterwards).
posh, the Policy-compliant Ordinary SHell, failed on this assignment
with:
tests.sh:253: : unexpected `end of expression'
checkbashisms gets confused by the rndc command being on two lines:
possible bashism in bin/tests/system/nzd2nzf/tests.sh line 37 (type):
rndccmd 10.53.0.1 addzone "added.example { type primary; file \"added.db\";
checkbashisms reports Bash-style ("==") string comparisons inside test/[
command:
possible bashism in bin/tests/system/checkconf/tests.sh line 105 (should be 'b = a'):
if [ $? == 0 ]; then echo_i "failed"; ret=1; fi
possible bashism in bin/tests/system/keyfromlabel/tests.sh line 62 (should be 'b = a'):
test $ret == 0 || continue
possible bashism in bin/tests/system/keyfromlabel/tests.sh line 79 (should be 'b = a'):
test $ret == 0 || continue
The checkbashisms script reports errors like this one:
script util/check-line-length.sh does not appear to have a #! interpreter line;
you may get strange results
It was possible to set operating system limits (RLIMIT_DATA,
RLIMIT_STACK, RLIMIT_CORE and RLIMIT_NOFILE) from named.conf. It's
better to leave these untouched as setting these is responsibility of
the operating system and/or supervisor.
Deprecate the configuration options and remove them in future BIND 9
release.
The retry 3 times when checking signatures did not make sense because
at this point the input file does not change.
Raise the number of retries when checking the apex DNSKEY response to
reduce the number of intermittent failures due to unexpected delays.
If 'set -x' is in effect file.prev gets populated with debugging output.
To prevent this open descriptor 3 and redirect stderr from the awk
command to descriptor 3. Debugging output will stay directed to stderr.
The changes in the code have the side effect that the CDNSKEY and CDS
records in the secure version of the zone are not reusable and thus
are thrashed from the zone. Remove the apex checks for this use case.
We only care about that the zone is not immediately goes bogus, but
a user really should use the built-in "insecure" policy when unsigning
a zone.
Add one more case that tests reconfiguring a zone to turn off
inline-signing. It should still be a valid DNSSEC zone and the NSEC3
parameters should not change.
Add another test to ensure that you cannot update the zone with a
NSEC3 record.
We no longer accept copying DNSSEC records from the raw zone to
the secure zone, so update the kasp system test that relies on this
accordingly.
Also add more debugging and store the dnssec-verify results in a file.
Add a kasp system test that reconfigures a dnssec-policy zone from
maintaining DNSSEC records directly to the zone to using inline-signing.
Add a similar test case to the nsec3 system test, testing the same
thing but now with NSEC3 in use.
the dupsigs test is prone to failing on slow CI machines
because the first test can occur before the zone is fully
signed.
instead of just waiting ten seconds arbitrarily, we now
check every second, and allow up to 30 seconds before giving
up.
Checks that malformed _dns SVCB records are rejected unless
check-svcb is set to no, in which case they are accepted. Both
missing ALPN and missing DOHPATH are checked for.
Add a new upforwd system test that checks if update forwarding still
works if the first primary is badly configured.
We cannot reuse the 'example.' zone for this test because that
checks if update forwarding works for DoT. What transport is used
in the new test is of no relevance.
Update the system test to use different known good file names for
the different zones that are being tested.
Use the ALGORITHM_SET option to use randomly selected default algorithm
in this test. Make sure the test works by using variables instead of
hard-coding values.
Use the get_algorithms.py script to detect supported algorithms and
select random algorithms to use for the tests.
Make sure to load common.conf.sh after KEYGEN env var is exported.
Multiple algorithm sets can be defined in this script. These can be
selected via the ALGORITHM_SET environment variable. For compatibility
reasons, "stable" set contains the currently used algorithms, since our
system tests need some changes before being compatible with randomly
selected algorithms.
The script operation is similar to the get_ports.py - environment
variables are created and then printed out as `export NAME=VALUE`
commands, to be interpreted by shell. Once we support pytest runner for
system tests, this should be a fixture instead.
Certain variables have to be exported in order for the system tests to
work. It makes little sense to export the variables in one place/script
while they're defined in another place.
Since it makes no harm, export all the variables to make the behaviour
more predictable and consistent. Previously, some variables were
exported as environment variables, while others were just shell
variables which could be used once the configuration was sourced from
another script. However, they wouldn't be exposed to spawned processes.
For simplicity sake (and for the upcoming effort to run system tests
with pytest), export all variables that are used. TESTS, PARALLEL_UNIX
and SUBDIRS variables are automake-specific, aren't used anywhere else
and thus not exported.
The only variable really needed for the script to work is the path to
the $KEYGEN binary. Allow setting this via an environment variable to
avoid loading conf.sh (and causing a chicken-egg problem). Also make
testcrypto.sh executable to allow its use from conf.sh.
Add a test case that if the first primary fails, the fallback of a
second primary on plain DNS works. This is mainly to test that the port
configuration inheritance works correctly.
Add a couple of tests that verify the serve-stale behavior when
stale-answer-client-timeout is set to 0 and a (stale) CNAME record is
queried.
Related #3517
The test triggers a prefetch, but fails to check if it acutally
happened, which prevented it from catching a bug when the record's
TTL value matches the configured prefetch eligibility value.
Check that prefetch happened by comparing the TTL values.
For tests where the TCP connection might get interrupted abruptly,
replace the nc with curl as the data sent from server to client might
get lost because of abrupt TCP connection. This happens when the TCP
connection gets closed during sending the large request to the server.
As we already require curl for other system tests, replace the nc usage
in the statschannel test with curl that actually understands the
HTTP/1.1 protocol, so the same connection is reused for sending the
consequtive requests, but without client-side "pipelining".
For the record, the server doesn't support parallel processing of the
pipelined request, so it's a bit misnomer here, because what we are
actually testing is that we process all requests received in a single
TCP read callback.
The 5 seconds requirement to finish the 'pipelined with truncated
stream' was causing spurious failures in the CI because the job runners
might be very busy and sending 128k of data might simply take some time.
Remove the time requirement altogether, there's actually no reason why
the test SHOULD or even MUST finish under 5 seconds.
Correctly source conf.sh in dupsigs test scripts (fix issue introduced
by 093af1c00a).
Update dupsigs test for dnssec-dnskey-kskonly default. Since v9.17.20,
the dnssec-dnskey-kskonly is set to yes. Update the test to not expect
the additional RRSIG with ZSK for DNSKEY.
Speed up the test from 20 minutes to 2.5 minutes and make it part of the
default test suite executed in CI.
- decrease number of records to sign from 2000 to 500
- decrease the signing interval by a factor of 6
- shorten the final part of the test after last signing (since nothing
new happens there)
Finally, clarify misleading comments about (in)sufficient time for zone
re-signing. The time used in the test is in fact sufficient for the
re-signing to happen. If it wasn't, the previous ZSK would end up being
deleted while its signatures would still be present, which is a
situation where duplicate signatures can still happen.
Ensure the port numbers are dynamically filled in with copy_setports.
Clarify test fail condition.
Make the stress test part of the default test suite since it doesn't
seem to run too long or interfere with other tests any more (the
original note claiming so is more than 20 years old).
Related !6883
Properly template the port number in config files with copy_setports.
The test takes two minutes on my machine which doesn't seem like a
proper justification to exclude it from the test suite, especially
considering we run these tests in parallel nowadays. The resource usage
doesn't seems significantly increased so it shouldn't interfere with
other system tests.
There also exists a precedent for longer running system tests that are
already part of the default system test suite (e.g. serve-stale takes
almost three minutes on the same machine).
When a target server is unreachable, the varying network conditions may
cause different ICMP message (or no message). The host unreachable
message was discovered when attempting to run the test locally while
connected to a VPN network which handles all traffic.
Extend the dig output check with "host unreachable" message to avoid a
false negative test result in certain network environments.
Add a test ensuring that the amount of work fctx_getaddresses() performs
for any encountered delegation is limited: delegate example.net to a set
of 1,000 name servers in the redirect.com zone, the names of which all
resolve to IP addresses that nothing listens on, and query for a name in
the example.net domain, checking the number of times the findname()
function gets executed in the process; fail if that count is excessively
large.
Since the size of the referral response sent by ans3 is about 20 kB, it
cannot be sent back over UDP (EMSGSIZE) on some operating systems in
their default configuration (e.g. FreeBSD - see the
net.inet.udp.maxdgram sysctl). To enable reliable reproduction of
CVE-2022-2795 (retry patterns vary across BIND 9 versions) and avoid
false positives at the same time (thread scheduling - and therefore the
number of fetch context restarts - vary across operating systems and
across test runs), extend bin/tests/system/resolver/ans3/ans.pl so that
it also listens on TCP and make "ns1" in the "resolver" system test
always use TCP when communicating with "ans3".
Also add a test (foo.bar.sub.tld1/TXT) that ensures the new limitations
imposed on the resolution process by the mitigation for CVE-2022-2795 do
not prevent valid, glueless delegation chains from working properly.
add a test to compare the Content-Length of successive compressed
messages on a single HTTP connection that should contain the same
data; fail if the size grows by more than 100 bytes from one query
to the next.
