removed references in code comments, doc/dev documentation, etc, to
isc_task, isc_timer_reset(), and isc_timertype_inactive. also removed a
coccinelle patch related to isc_timer_reset() that was no longer needed.
move all dns_sdb code into bin/named/builtin.c, which is the
only place from which it's called.
(note this is temporary: later we'll refactor builtin so that it's a
standalone dns_db implementation on its own instead of using SDB
as a wrapper.)
move database attach/detach functions to db.c, instead of
requiring them to be implemented for every database type.
instead, they must implement a 'destroy' function that is
called when references go to zero.
this enables us to use ISC_REFCOUNT_IMPL for databases,
with detailed tracing enabled by setting DNS_DB_TRACE to 1.
SDB is currently (and foreseeably) only used by the named
builtin databases, so it only needs as much of its API as
those databases use.
- removed three flags defined for the SDB API that were always
set the same by builtin databases.
- there were two different types of lookup functions defined for
SDB, using slightly different function signatures. since backward
compatibility is no longer a concern, we can eliminate the 'lookup'
entry point and rename 'lookup2' to 'lookup'.
- removed the 'allnodes' entry point and all database iterator
implementation code
- removed dns_sdb_putnamedrr() and dns_sdb_putnamedrdata() since
they were never used.
some dns_db functions would have crashed if the DB implementation failed
to implement them, requiring the implementations to add functions that
did nothing but return ISC_R_NOTIMPLEMENTED or some obvious default
value. we can just have the dns_db wrapper functions themselves return
those values, and clean up the implementations accordingly.
make the private isc__rdatalist_* functions public dns_rdatalist
functions so that all the rdatalist primitives can be used by
callers to libdns. (this will be needed later for moving SDB and
SDLZ out of libdns.)
as every validator function is loop-synchronized, it should no longer be
necessary to use a validator lock.
calling dns_validator_send(), dns_validator_cancel() or
dns_validator_destroy() from a thread other than the one on which the
validator is running will now cause an assertion failure; this should be
fine since the validator and resolver are tightly coupled, and the fetch
contexts and validators run in the same loops.
refactor validator so that the validation status object (previously
called dns_valstatus_t, which was derived from dns_validatorevent_t), is
now part of the dns_validator object. when calling validator callbacks,
the validator itself is now sent as the argument.
(note: this necessitates caution in the callback functions that are
internal to validator.c validators spawn other validators, and it can be
confusing at times whether we need to be looking at val, val->subvalidator,
or val->parent.)
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
change functions using isc_taskmgr_beginexclusive() to use
isc_loopmgr_pause() instead.
also, removed an unnecessary use of exclusive mode in
named_server_tcptimeouts().
most functions that were implemented as task events because they needed
to be running in a task to use exclusive mode have now been changed
into loop callbacks instead. (the exception is catz, which is being
changed in a separate commit because it's a particularly complex change.)
callback events from dns_resolver_createfetch() are now posted
using isc_async_run.
other modules which called the resolver and maintained task/taskmgr
objects for this purpose have been cleaned up.
The callbacks from dns_abd_createfind() are now posted using
isc_async_run() instead of isc_task_send(). ADB event types
have been replaced with a new dns_adbstatus_t type which is
included as find->status.
(The ADB still uses a task for dns_resolver_createfetch().)
dns_request_create() and _createraw() now take a 'loop' parameter
and run the callback event on the specified loop.
as the task manager is no longer used, it has been removed from
the dns_requestmgr structure. the dns_resolver_taskmgr() function
is also no longer used and has been removed.
- removed documentation of -S option from named man page
- removed documentation of reserved-sockets from ARM
- simplified documentation of dnssec-secure-to-insecure - it
now just says it's obsolete rather than describing what it
doesn't do anymore
- marked three formerly obsolete options as ancient:
parent-registration-delay, reserved-sockets, and
suppress-initial-notify
isc_bind9 was a global bool used to indicate whether the library
was being used internally by BIND or by an external caller. external
use is no longer supported, but the variable was retained for use
by dyndb, which needed it only when being built without libtool.
building without libtool is *also* no longer supported, so the variable
can go away.
Instead of using an extra rarely-used paramater to dns_clientinfo_init()
to set ECS information for a client, this commit adds a function
dns_clientinfo_setecs() which can be called only when ECS is needed.
* rbt node chains were sized to allow for bitstring labels, so they
had 256 levels; but in the absence of bistrings, 128 is enough.
* dns_byaddr_createptrname() had a redundant options argument,
and a very outdated doc comment.
* A number of comments referred to bitstring labels in a way that is
no longer helpful. (A few informative comments remain.)
Previously, the zone loading and dumping was effectively serialized by
the dns_io_t mechanism. In theory, more IO operations could be run in
parallel, but the zone manager .iolimit was set to 1 and never increased
as dns_zonemgr_setiolimit() was never ever called.
As the dns_master asynchronous load and dump was already offloaded to
non-worker threads with isc_work mechanism, drop the whole dns_io_t
and just rely on the isc_work to do the load and dump scheduling.
Instead of dumping the signed zone contents node by node during the
signing, dump the entire zone at the end. This was already done for the
raw zone format, but it shows that the IO is better utilized when the
zone dump is done in one single write rather than in small chunks.
A side effect of dumping node by node was that all names were printed
relative to the zone origin rather than being grouped under different
$ORIGINs as would normally be the case when dumping a zone. Also, state
was not maintained from one node to the next regarding whether the CLASS
has already been printed, so it was always included with the first
record of each node.
Since dnssec-signzone uses the dns_master_style_explicittl text format
style, and is the only application that does so, we can revise that
style and add a new DNS_STYLEFLAG_CLASS_PERNAME flag to get the output
back to what it was before this change.
Add support for loading and validating the 'tls' parameter from
the forwarders' configuration.
This prepares ground for adding support to forward queries to
DoT-enabled upstream servers.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
With 'stale-answer-enable yes;' and 'stale-answer-client-timeout off;',
consider the following situation:
A CNAME record and its target record are in the cache, then the CNAME
record expires, but the target record is still valid.
When a new query for the CNAME record arrives, and the query fails,
the stale record is used, and then the query "restarts" to follow
the CNAME target. The problem is that the query's multiple stale
options (like DNS_DBFIND_STALEOK) are not reset, so 'query_lookup()'
treats the restarted query as a lookup following a failed lookup,
and returns a SERVFAIL answer when there is no stale data found in the
cache, even if there is valid non-stale data there available.
With this change, query_lookup() now considers non-stale data in the
cache in the first place, and returns it if it is available.
Remove parsing the configuration options 'alt-transfer-source',
'alt-transfer-source-v6', and 'use-alt-transfer-source', and remove
the corresponding code that implements the feature.
The dns_remote_t structure is intended to replace the variables in
the structure that deals with remote server communication to primaries,
parental agents, forwarders, etc.
The dispatches are not thread-bound, and used freely between various
threads (see the dns_resolver and dns_request units for details).
This refactoring make sure that all non-const dns_dispatch_t and
dns_dispentry_t members are accessed under a lock, and both object now
track their internal state (NONE, CONNECTING, CONNECTED, CANCELED)
instead of guessing the state from the state of various struct members.
During the refactoring, the artificial limit DNS_DISPATCH_SOCKSQUOTA on
UDP sockets per dispatch was removed as the limiting needs to happen and
happens on in dns_resolver and limiting the number of UDP sockets
artificially in dispatch could lead to unpredictable behaviour in case
one dispatch has the limit exhausted by others are idle.
The TCP artificial limit of DNS_DISPATCH_MAXREQUESTS makes even less
sense as the TCP connections are only reused in the dns_request API
that's not a heavy user of the outgoing connections.
As a side note, the fact that UDP and TCP dispatch pretends to be same
thing, but in fact the connected UDP is handled from dns_dispentry_t and
dns_dispatch_t acts as a broker, but connected TCP is handled from
dns_dispatch_t and dns_dispatchmgr_t acts as a broker doesn't really
help the clarity of this unit.
This refactoring kept to API almost same - only dns_dispatch_cancel()
and dns_dispatch_done() were merged into dns_dispatch_done() as we need
to cancel active netmgr handles in any case to not leave dangling
connections around. The functions handling UDP and TCP have been mostly
split to their matching counterparts and the dns_dispatch_<function>
functions are now thing wrappers that call <udp|tcp>_dispatch_<function>
based on the socket type.
More debugging-level logging was added to the unit to accomodate for
this fact.
The dns_adb_getcookie() doesn't use the 'adb' parameter, remove it.
Refactor the dns_adb_getcookie() function to just return the size of
the cookie when the caller passes 'NULL' as the 'cookie' argument.
'DNS_DB_STALEOK' returns stale rdatasets as well as current rdatasets.
'DNS_DB_EXPIREDOK' returns expired rdatasets as well as current
rdatasets. This option is currently only set when DNS_DB_STALEOK is
also set.
dns_db_updatenotify_unregister needed to be called earlier to ensure
that listener->onupdate_arg always points to a valid object. The
existing lazy cleanup in rbtdb_free did not ensure that.
This is second in the series of fixing the usage of hashtables in the
dns_adb and the dns_resolver units.
Currently, the fetch buckets (used to hold the fetch context) and zone
buckets (used to hold per-domain counters) would never get cleaned from
the memory. Combined with the fact that the hashtable now grows as
needed (instead of using hashtable as buckets), the memory usage in the
resolver can just grow and it never drops down.
In this commit, the usage of hashtables (hashmaps) has been completely
rewritten, so there are no "buckets" and all the matching conditions are
directly mapped into the hashtable key:
1. For per-domain counter hashtable, this is simple as the lowercase
domain name is used directly as a counter.
2. For fetch context hashtable, this requires copying some extra flags
back and forth in the key.
As we don't hold the "buckets" forever, the cleaning mechanism has been
rewritten as well:
1. For per-domain counter hashtable, this is again much simpler, as we
only need to check whether the usage counter is still zero under the
lock and bail-out on cleaning if the counter is in use.
2. For fetch context hashtable, this is more complicated as the fetch
context cannot be reused after it has been finished. The algorithm
is different, the fetch context is always removed from the
hashtable, but if we find the fetch context that has been marked
as finished in the lookup function, we help with the cleaning from
the hashtable and try again.
Couple of additional changes have been implemented in this refactoring
as those were needed for correct functionality and could not be split
into individual commits (or would not make sense as seperate commits):
1. The dns_resolver_createfetch() has an option to create "unshared"
fetch. The "unshared" fetch will never get matched, so there's
little point in storing the "unshared" fetch in the hashtable.
Therefore the "unshared" fetches are now detached from the
hashtable and live just on their own.
2. Replace the custom reference counting with ISC_REFCOUNT_DECL/IMPL
macros for better tracing.
3. fctx_done_detach() is idempotent, it makes the "final" detach (the
one matching the create function) only once. But that also means
that it has to be called before the detach that kept the fetch
context alive in the callback. A new macro fctx_done_unref() has
been added to allow this code flow:
fctx_done_unref(fctx, result);
fctx_detach(&fctx);
Doing this the other way around could cause fctx to get destroyed in
the fctx_unref() first and fctx_done_detach() would cause UAF.
4. The resume_qmin() and resume_dslookup() callbacks have been
refactored for more readability and simpler code paths. The
validated() callback has also received some of the simplifications,
but it should be refactored in the future as it is bit of spaghetti
now.
The mechanism for associating a worker task to a database now
uses loops rather than tasks.
For this reason, the parameters to dns_cache_create() have been
updated to take a loop manager rather than a task manager.
