- use isc_buffer functions when appropriate, rather than converting
to and from isc_region unnecessarily
- use the zlib total_out value instead of calculating it
- use c99 struct initialization
(cherry picked from commit 4b7248545e)
dns_request_create() was a front-end to dns_request_createvia() that
was only used by test binaries. dns_request_createvia() has been
renamed to dns_request_create(), and the test programs that formerly
used dns_request_create() have been updated to use the new parameters.
(cherry picked from commit ebf7b31aa3)
An assertion failure would be triggered when the TCP connection
is canceled during sending the data back to the client.
Don't require the state to be `RECV` on non successful read to
gracefully handle canceled TCP connection during the SEND state of the
HTTPD channel.
(cherry picked from commit 6562227cc8)
the "random-device" option was made non-functional in 9.13, but was
not marked as obsolete at that time. this is now fixed; configuring
"random-device" will trigger a warning.
Don't attempt to resolve DNS responses for intermediate results. This
may create multiple refreshes and can cause a crash.
One scenario is where for the query there is a CNAME and canonical
answer in cache that are both stale. This will trigger a refresh of
the RRsets because we encountered stale data and we prioritized it over
the lookup. It will trigger a refresh of both RRsets. When we start
recursing, it will detect a recursion loop because the recursion
parameters will eventually be the same. In 'dns_resolver_destroyfetch'
the sanity check fails, one of the callers did not get its event back
before trying to destroy the fetch.
Move the call to 'query_refresh_rrset' to 'ns_query_done', so that it
is only called once per client request.
Another scenario is where for the query there is a stale CNAME in the
cache that points to a record that is also in cache but not stale. This
will trigger a refresh of the RRset (because we encountered stale data
and we prioritized it over the lookup).
We mark RRsets that we add to the message with
DNS_RDATASETATTR_STALE_ADDED to prevent adding a duplicate RRset when
a stale lookup and a normal lookup conflict with each other. However,
the other non-stale RRset when following a CNAME chain will be added to
the message without setting that attribute, because it is not stale.
This is a variant of the bug in #2594. The fix covered the same crash
but for stale-answer-client-timeout > 0.
Fix this by clearing all RRsets from the message before refreshing.
This requires the refresh to happen after the query is send back to
the client.
(cherry picked from commit d939d2ecde)
When used with OpenSSL v3.0.0+, the `openssldh_compare()`,
`openssldh_paramcompare()`, and `openssldh_todns()` functions
fail to cleanup the used memory on some error paths.
Use `DST_RET` instead of `return`, when there is memory to be
released before returning from the functions.
(cherry picked from commit 73d6bbff4e)
when the compression buffer was reused for multiple statistics
requests, responses could grow beyond the correct size. this was
because the buffer was not cleared before reuse; compressed data
was still written to the beginning of the buffer, but then the size
of used region was increased by the amount written, rather than set
to the amount written. this caused responses to grow larger and
larger, potentially reading past the end of the allocated buffer.
(cherry picked from commit 47e9fa981e)
Limit the amount of database lookups that can be triggered in
fctx_getaddresses() (i.e. when determining the name server addresses to
query next) by setting a hard limit on the number of NS RRs processed
for any delegation encountered. Without any limit in place, named can
be forced to perform large amounts of database lookups per each query
received, which severely impacts resolver performance.
The limit used (20) is an arbitrary value that is considered to be big
enough for any sane DNS delegation.
(cherry picked from commit 3a44097fd6)
It is possible to bypass Response Rate Limiting (RRL)
`responses-per-second` limitation using specially crafted wildcard
names, because the current implementation, when encountering a found
DNS name generated from a wildcard record, just strips the leftmost
label of the name before making a key for the bucket.
While that technique helps with limiting random requests like
<random>.example.com (because all those requests will be accounted
as belonging to a bucket constructed from "example.com" name), it does
not help with random names like subdomain.<random>.example.com.
The best solution would have been to strip not just the leftmost
label, but as many labels as necessary until reaching the suffix part
of the wildcard record from which the found name is generated, however,
we do not have that information readily available in the context of RRL
processing code.
Fix the issue by interpreting all valid wildcard domain names as
the zone's origin name concatenated to the "*" name, so they all will
be put into the same bucket.
(cherry picked from commit baa9698c9d)
set the magic number in a newly-created interface object
before appending it to mgr->interfaces in order to prevent
a possible assertion.
(cherry picked from commit 8c01662048)
Having implicit inline-signing set for dnssec-policy when there is no
update policy is confusing, so lets make this explicit.
(cherry picked from commit 5ca02fe6e7e591d1fb85936ea4dda720c3d741ef)
This should make sure that the memory context is not destroyed
before the memory pool, which is using the context.
(cherry picked from commit e97c3eea95)
The dnstap query_message field was in some cases being filled in
with response messages, along with the response_message field.
The query_message field should only be used when logging requests,
and the response_message field only when logging responses.
(cherry picked from commit 3ccfff8ab6)
There is one case in 'dns_nsec3_activex()' where it returns but forgets
to detach the db node. Add the missing 'dns_db_detachnode()' call.
This case only triggers if 'sig-signing-type' (privatetype) is set to 0
(which by default is not), or if the function is called with 'complete'
is set to 'true' (which at this moment do not exist).
(cherry picked from commit 0cf6c18ccb2205a1fc81431f908c8310f6136bbb)
When doing a dnssec-policy reconfiguration from a zone with NSEC only
keys to a zone that uses NSEC3, figure out to wait with building the
NSEC3 chain.
Previously, BIND 9 would attempt to sign such a zone, but failed to
do so because the NSEC3 chain conflicted with existing DNSKEY records
in the zone that were not compatible with NSEC3.
There exists logic for detecting such a case in the functions
dnskey_sane() (in lib/dns/zone.c) and check_dnssec() (in
lib/ns/update.c). Both functions look very similar so refactor them
to use the same code and call the new function (called
dns_zone_check_dnskey_nsec3()).
Also update the dns_nsec_nseconly() function to take an additional
parameter 'diff' that, if provided, will be checked whether an
offending NSEC only DNSKEY will be deleted from the zone. If so,
this key will not be considered when checking the zone for NSEC only
DNSKEYs. This is needed to allow a transition from an NSEC zone with
NSEC only DNSKEYs to an NSEC3 zone.
(cherry picked from commit 09a81dc84ce0fee37442f03cdbd63c2398215376)
When the HTTP request has a body part after the HTTP headers, it is
not getting processed and is being prepended to the next request's data,
which results in an error when trying to parse it.
Improve the httpd.c:process_request() function with the following
additions:
1. Require that HTTP POST requests must have Content-Length header.
2. When Content-Length header is set, extract its value, and make sure
that it is valid and that the whole request's body is received before
processing the request.
3. Discard the request's body by consuming Content-Length worth of data
in the buffer.
(cherry picked from commit c2bbdc8a648c9630b2c9cea5227ad5c309c2ade5)
Add a new `const char **fvalue` parameter to the httpd.c:have_header()
function which, when set, will point to the found header's value.
(cherry picked from commit 376e698dc21f4117d6461101c4cfbaef2b724592)
When dumping an ADB address entry associated with a name,
the name bucket lock was held, but the entry bucket lock was
not; this could cause data races when other threads were updating
address entry info. (These races are probably not operationally
harmful, but they triggered TSAN error reports.)
When checking if we should enable serve-stale, add an early out case
when the result is an error signalling a duplicate query or a query
that would be dropped.
(cherry picked from commit 059a4c2f4d9d3cff371842f43208d021509314fa)
In some circumstances generic TLS code could have resumed data reading
unexpectedly on the TCP layer code. Due to this, the behaviour of
isc_nm_pauseread() and isc_nm_resumeread() might have been
unexpected. This commit fixes that.
The bug does not seems to have real consequences in the existing code
due to the way the code is used. However, the bug could have lead to
unexpected behaviour and, at any rate, makes the TLS code behave
differently from the TCP code, with which it attempts to be as
compatible as possible.
(cherry picked from commit ec0647d546204a0e09aeaf0e2aabb37f1fb67dd0)
When initially hitting the `fetches-per-zone` value, a log message
is being generated for the event of dropping the first fetch, then
any further log events occur only when another fetch is being dropped
and 60 seconds have been passed since the last logged message.
That logic isn't ideal because when the counter of the outstanding
fetches reaches zero, the structure holding the counters' values will
get deleted, and the information about the dropped fetches accumulated
during the last minute will not be logged.
Improve the fcount_logspill() function to makie sure that the final
values are getting logged before the counter object gets destroyed.
(cherry picked from commit 039871ceb767088205563965f7aae622a3f77082)
Sometimes tls_do_bio() might be called when there is no new data to
process (most notably, when resuming reads), in such a case internal
TLS session state will remain untouched and old value in 'errno' will
alter the result of SSL_get_error() call, possibly making it to return
SSL_ERROR_SYSCALL. This value will be treated as an error, and will
lead to closing the connection, which is not what expected.
Fedora 33 doesn't support RSASHA1 in future mode. There is no easy
check for this other than by attempting to perform a verification
using known good signatures. We don't attempt to sign with RSASHA1
as that would not work in FIPS mode. RSASHA1 is verify only.
The test vectors were generated using OpenSSL 3.0 and
util/gen-rsa-sha-vectors.c. Rerunning will generate a new set of
test vectors as the private key is not preserved.
e.g.
cc util/gen-rsa-sha-vectors.c -I /opt/local/include \
-L /opt/local/lib -lcrypto
(cherry picked from commit cd3f00874f63a50954cebb78edac8f580a27c0de)
The command 'rndc dumpdb -expired' will include expired RRsets in the
output, but only for the RBTDB_VIRTUAL time (of 5 minutes). This means
that if there is a cache cleaning problem and contents are not cleaned
up, the rndc command has little diagnostic value. Fix this by including
all RRsets in the dumpdb output if the '-expired' flag is set.
(cherry picked from commit 930ba2c914a0abc07fd087d663a7bfb57850d4ca)
The BUFSIZ value varies between platforms, it could be 8K on Linux and
512 bytes on mingw. Make sure the buffers are always big enough for the
output data to prevent truncation of the output by appropriately
enlarging or sizing the buffers.
(cherry picked from commit b19d932262e84608174cb89eeed32ae0212f8a87)
When a thread calls dns_dispatch_connect() on an unconnected TCP socket
it sets `tcpstate` from `DNS_DISPATCHSTATE_NONE` to `_CONNECTING`.
Previously, it then INSISTed that there were no pending connections
before calling isc_nm_tcpdnsconnect().
If a second thread called dns_dispatch_connect() during that window
of time, it could add a pending connection to the list, and trigger
an assertion failure.
This commit removes the INSIST since the condition is actually
harmless.
(cherry picked from commit 25ddec8a0a8e0549b69f4e601028f3323d3c1886)
The STATID_CONNECT and STATID_CONNECTFAIL statistics were used
incorrectly. The STATID_CONNECT was incremented twice (once in
the *_connect_direct() and once in the callback) and STATID_CONNECTFAIL
would not be incremented at all if the failure happened in the callback.
Closes: #3452
(cherry picked from commit 59e1703b50dc4a5c52e3d6ae13bdd873a677b03f)
On FreeBSD (and perhaps other *BSD) systems, the TCP connect() call (via
uv_tcp_connect()) can fail with transient UV_EADDRINUSE error. The UDP
code already handles this by trying three times (is a charm) before
giving up. Add a code for the TCP, TCPDNS and TLSDNS layers to also try
three times before giving up by calling uv_tcp_connect() from the
callback two more time on UV_EADDRINUSE error.
Additionally, stop the timer only if we succeed or on hard error via
isc__nm_failed_connect_cb().
(cherry picked from commit b21f507c0ac5b5d2d2c27fd2d71e27e8605dd5fc)
free_namelist could be passed names with associated rdatasets
when handling errors. These need to be disassociated before
calling dns_message_puttemprdataset.
(cherry picked from commit 745d5edc3a8ca6f232b2d700ae076c2caee2bfc5)
Commit 7b2ea97e46 introduced a logic bug
in resume_dslookup(): that function now only conditionally checks
whether DS chasing can still make progress. Specifically, that check is
only performed when the previous resume_dslookup() call invokes
dns_resolver_createfetch() with the 'nameservers' argument set to
something else than NULL, which may not always be the case. Failing to
perform that check may trigger assertion failures as a result of
dns_resolver_createfetch() attempting to resolve an invalid name.
Example scenario that leads to such outcome:
1. A validating resolver is configured to forward all queries to
another resolver. The latter returns broken DS responses that
trigger DS chasing.
2. rctx_chaseds() calls dns_resolver_createfetch() with the
'nameservers' argument set to NULL.
3. The fetch fails, so resume_dslookup() is called. Due to
fevent->result being set to e.g. DNS_R_SERVFAIL, the default branch
is taken in the switch statement.
4. Since 'nameservers' was set to NULL for the fetch which caused the
resume_dslookup() callback to be invoked
(fctx->nsfetch->private->nameservers), resume_dslookup() chops off
one label off fctx->nsname and calls dns_resolver_createfetch()
again, for a name containing one label less than before.
5. Steps 3-4 are repeated (i.e. all attempts to find the name servers
authoritative for the DS RRset being chased fail) until fctx->nsname
becomes stripped down the the root name.
6. Since resume_dslookup() does not check whether DS chasing can still
make progress, it strips off a label off the root name and continues
its attempts at finding the name servers authoritative for the DS
RRset being chased, passing an invalid name to
dns_resolver_createfetch().
Fix by ensuring resume_dslookup() always checks whether DS chasing can
still make progress when a name server fetch fails. Update code
comments to ensure the purpose of the relevant dns_name_equal() check is
clear.
(cherry picked from commit 1a79aeab44)
messages indicating the reason for a fallback to AXFR (i.e, because
the requested serial number is not present in the journal, or because
the size of the IXFR response would exceeed "max-ixfr-ratio") are now
logged at level info instead of debug(4).
(cherry picked from commit df1d81cf96)
Before this change the TLS code would ignore the accept callback result,
and would not try to gracefully close the connection. This had not been
noticed, as it is not really required for DoH. Now the code tries to
shut down the TLS connection gracefully when accepting it is not
successful.
(cherry picked from commit ffcb54211e)
Otherwise the code path will lead to a call to SSL_get_error()
returning SSL_ERROR_SSL, which in turn might lead to closing
connection to early in an unexpected way, as it is clearly not what is
intended.
The issue was found when working on loppmgr branch and appears to
be timing related as well. Might be responsible for some unexpected
transmission failures e.g. on zone transfers.
(cherry picked from commit 8585b92f98)
In some operations - most prominently when establishing connection -
it might be beneficial to bail out earlier when the network manager
is stopping.
The issue is backported from loopmgr branch, where such a change is
not only beneficial, but required.
(cherry picked from commit fc74b15e67)
In some cases - in particular, in case of errors, NULL might be passed
to a connection callback instead of a handle that could have led to
an abort. This commit ensures that such a situation will not occur.
The issue was found when working on the loopmgr branch.
(cherry picked from commit ac4fb34f18)
This commit ensures that the underlying TCP socket of a TLS connection
gets closed earlier whenever there are no pending operations on it.
In the loop-manager branch, in some circumstances the connection
could have remained opened for far too long for no reason. This
commit ensures that will not happen.
(cherry picked from commit 88524e26ec)
This commit adds a proper implementation of
isc_nmhandle_setwritetimeout() for TLS connections. Now it passes the
value to the underlying TCP handle.
(cherry picked from commit 237ce05b89)
