The network manager layer has two different timers with their
own timeout values for TCP connections: connect timeout and read
timeout. Separate the connect and the read TCP timeouts in the
dispatch module too.
this test adds a record with empty non-terminal nodes above it. this
has also been observed to trigger the crash in NSEC3 zones.
NOTE: the test currently fails, because while there is no crash, the
query results are not as expected. when we add a node below an ENT,
receive_secure_serial() gets DNS_R_PARTIALMATCH, and the signed
zone is never updated. this is not a regression from fixing the
crash bug; it's a separate inline-signing bug.
test that there's no crash when querying for a newly-deleted node.
(incidentally also renamed ns3/named.conf.in to ns3/named1.conf.in,
because named2.conf.in does exist, and they should match.)
Commit b121f02eac renamed the top-level
"primaries" block in bin/named/config.c to "remote-servers". This
configuration block lists the primary servers used for an IANA root zone
mirror when no primary servers are explicitly specified for it in the
configuration. However, the relevant part of the named_zone_configure()
function only looks for a top-level "primaries" block and not for any of
its synonyms. As a result, configuring an IANA root zone mirror with
just:
zone "." {
type mirror;
};
now results in a cryptic fatal error on startup:
loading configuration: not found
exiting (due to fatal error)
Fix by using the correct top-level block name in named_zone_configure().
This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
Since BIND 9 headers are not longer public, there's no reason to keep
the ISC_LANG_BEGINDECL and ISC_LANG_ENDDECL macros to support including
them from C++ projects.
DLV is long gone, so we can remove design documentation around DLV,
related command line options (that were already a hard failure),
and some DLV related test remnants.
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
The terminating conditions for the startup notify test would
occasionally get ~20 records or get +10 seconds of records due to
a bad terminating condition. Additionally 20 samples lead to test
failures. Fix the terminating condition to use the correct conditional
(-eq -> -ge) and increase the minimum number of log entries to
average over to 40.
After the rndc reload command finished, we might have queried the
database zone sooner than it was reloaded because rndc reloads zones
asynchronously if no specific zone was provided. We should wait for "all
zones loaded" in the ns1 log to be sure.
this commit removes the deprecated "sortlist" option. the option
is now marked as ancient; it is a fatal error to use it in
named.conf.
the sortlist system test has been removed, and other tests that
referenced the option have been modified.
the enabling functions, dns_message_setsortorder() and
dns_rdataset_towiresorted(), have also been removed.
This checks that "zone has A records but is not served by IPv4
servers" and "zone has AAAA records but is not served by IPv6
servers" are emitted when they should be and not when they shouldn't
be.
named-checkzone will now, as part of the zone's integrity checks,
look to see if there are A or AAAA records being served and if so
check that the nameservers have A or AAAA records respectively.
These are a sometimes overlooked checks that, if not met, can mean
that a service that is supposed to reachable over IPv6 will not be
resolvable when the recursive resolver is IPv6 only. Similarly for
IPv4 servers when there are IPv4 only resolvers.
The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature. There are no
reasons to keep this feature in the production code anymore.
Remove the feature to simplify the code.
when the attach-cache option is used in the options block
with an arbitrary name, it causes all views to use the same
cache. however, previously, this could cause the cache to be
deleted and a new cache created every time the server was
reconfigured. this did *not* occur when attach-cache was
used at the view level to refer back to another view's cache.
in this commit we correct the problem by checking for
pre-existing caches during reconfiguration, and moving
them from the old server cache list to the new cache list
before cleaning up and freeing the old cache list.
If ECDSAP256SHA256_SUPPORTED or ECDSAP384SHA384_SUPPORTED variables were
not present in the environment, os.environ would raise KeyError that is
not being handled in the decorator. Use os.getenv() instead.
Changing the default for max-recursion-queries from 100 to 32 was too
strict in some cases, especially lookups in reverse IPv6 trees started
to fail more frequently. From issue #4921 it looks like 50 is a better
default.
Now that we have 'max-query-count' as a global limit of outgoing queries
per client request, we can increase the default for
'max-recursion-queries' again, as the number of recursive queries is
no longer bound by the multiple of 'max-recursion-queries' and
'max-query-restarts'.
This adds a new test directory specifically for CAMP attacks. This first
test in this test directory follows multiple CNAME chains, restarting
the max-recursion-queries counter, but should bail when the global
maximum quota max-query-count is reached.
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
The ns2/managed1.conf file is created by the setup.sh script. Then, in
the tests.sh script it is moved to ns2/managed.conf. The latter file
name is in mkeys extra_artifacts, but the former one is not. This is a
problem when pytest is started with the --setup-only option as it only
runs the setup.sh script (e.g., in the cross-version-config-tests CI
job) and thus failing the "Unexpected files found" assertion.
the generated grammar for named.conf clauses that may or may not be
enabled at compile time will now print the same comment regardless of
whether or not they are.
previously, the grammar didn't print a comment if an option was enabled,
but printed "not configured" if it was disabled. now, in both cases,
it will say "optional (only available if configured)".
as an incidental fix, clarified the documentation for "named-checkconf -n".
When the tests were added, the files were generated without FIPS
compatibility in mind. That made the tests fail on recent OpenSSL
versions in FIPS mode.
So, the files were regenerated on a FIPS compliant system using the
following stanza:
$ openssl dhparam -out <file> 3072
Apparently, the old files are not valid for FIPS starting with OpneSSL
3.1.X release series as "FIPS 140-3 compliance changes" are mentioned
in the changelog:
https://openssl-library.org/news/openssl-3.1-notes/
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
The nslookup system test checks the count of resolved addresses in
the CNAME tests using a 'grep' match on the hostname, and ignoring
lines containing the 'canonical name' string. In order to protect
the check from intermittent failures like the 'address in use' warning
message, which then automatically resolves after a retry, edit the
'grep' matching string to also ignore the comments (as the mentioned
warning message is a comment which contains the hostname).
Add test cases which check that when a XoT primary server is
unreachable or is already marked as unreachble then the next
primary server in the list is used.
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
Stop using ns_listenlist_default() to set the default listen-on
and listen-on-v6 configuration. Instead, configure these options
using the default values in config.c.
