This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
Previously, we had an ISC_CONSTEXPR macro that was expanded to either
`constexpr` or `static const`, depending on compiler support. To make
the code cleaner, move `constexpr` support detection to Autoconf; if
`constexpr` support is missing from the compiler, define `constexpr` as
`static const` in config.h.
Since BIND 9 headers are not longer public, there's no reason to keep
the ISC_LANG_BEGINDECL and ISC_LANG_ENDDECL macros to support including
them from C++ projects.
- remove obsolete DNS_LOGMODULE_RBT and DNS_LOGMODULE_RBTDB
- correct the misuse of the wrong log modules in dns/rpz.c and
dns/catz.c, and add DNS_LOGMODULE_RPZ and DNS_LOGMODULE_CATZ
to support them.
The DNS_R_MUSTBESECURE lost its meaning with removal of
dnssec-must-be-secure option, so replace the few remaining (and a bit
confusing) use of this result code with DNS_R_NOVALIDSIG.
The code that listens on individual interfaces is now stable and doesn't
require any changes. The code that would bind to IPv6 wildcard address
and then use IPv6 pktinfo structure to get the source address is not
going to be completed, so it's better to just remove the dead cruft.
In 2024, it is reasonable to assume that IPv4 and IPv6 is always
available on a socket() level. We still keep the option to enable or
disable each IP version individually, as the routing might be broken or
undesirable for one of the versions.
The DLZ modules are poorly maintained as we only ensure they can still
be compiled, the DLZ interface is blocking, so anything that blocks the
query to the database blocks the whole server and they should not be
used except in testing. The DLZ interface itself should be scheduled
for removal.
The libisc now includes sizeable chunks of cryptography, but the crypto
log module was missing. Add the new ISC_LOGMODULE_CRYPTO to libisc and
use it in the isc_tls error logging.
Add query counters for DoT, DoH, unencrypted DoH and their proxied
counterparts. The protocols don't increment TCP/UDP counters anymore
since they aren't the same as plain DNS-over-53.
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
This commit adds support for the EDNS Report-Channel option,
which is returned in authoritative responses when EDNS is in use.
"send-report-channel" sets the Agent-Domain value that will be
included in EDNS Report-Channel options. This is configurable at
the options/view level; the value is a DNS name. Setting the
Agent-Domain to the root zone (".") disables the option.
When this value has been set, incoming queries matchng the form
_er.<qtype>.<qname>.<extended-error-code>._er.<agent-domain>/TXT
will be logged to the dns-reporting-agent channel at INFO level.
(Note: error reporting queries will only be accepted if sent via
TCP or with a good server cookie. If neither is present, named
returns BADCOOKIE to complete the DNS COOKIE handshake, or TC=1
to switch the client to TCP.)
Unify libcrypto initialization and explicit digest fetching in a single
place and move relevant code to the isc__crypto namespace instead of
isc__tls.
It will remove the remaining implicit fetching and deduplicate explicit
fetching inside the codebase.
This commit adds support for timestamps in iso8601 format with timezone
when logging. This is exposed through the iso8601-tzinfo printtime
suboption.
It also makes the new logging format the default for -g output,
hopefully removing the need for custom timestamp parsing in scripts.
As the relaxed memory ordering doesn't ensure any memory
synchronization, it is possible that the increment will succeed even
in the case when it should not - there is a race between
atomic_fetch_sub(..., acq_rel) and atomic_fetch_add(..., relaxed).
Only the result is consistent, but the previous value for both calls
could be same when both calls are executed at the same time.
Add an extra thread that can be used to offload operations that would
affect latency, but are not long-running tasks; those are handled by
isc_work API.
Each isc_loop now has matching isc_helper thread that also built on top
of uv_loop. In fact, it matches most of the isc_loop functionality, but
only the `isc_helper_run()` asynchronous call is exposed.
The new
isc_log_createandusechannel() function combines following calls:
isc_log_createchannel()
isc_log_usechannel()
calls into a single call that cannot fail and therefore can be used in
places where we know this cannot fail thus simplifying the error
handling.
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
The isc_log_write1() and isc_log_vwrite1() functions were meant to
de-duplicate the messages sent to the isc_log subsystem. However, they
were never used in an entire code base and the whole mechanism around it
was complicated and very inefficient. Just remove those, there are
better ways to deduplicate syslog messages inside syslog daemons now.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
Instead of juggling different logging context, use one single logging
context that gets initialized in the libisc constructor and destroyed in
the libisc destructor.
The application is still responsible for creating the logging
configuration before using the isc_log API.
This patch is first in the series in a way that it is transparent for
the users of the isc_log API as the isc_log_create() and
isc_log_destroy() are now thin shims that emulate the previous
functionality, but it isc_log_create() will always return internal
isc__lctx pointer and isc_log_destroy() will actually not destroy the
internal isc__lctx context.
Signed-off-by: Ondřej Surý <ondrej@isc.org>
The contexpr introduced in C23 standard makes perfect sense to be used
instead of preprocessor macros - the symbols are kept, etc. Define
ISC_CONSTEXPR to be `constexpr` for C23 and `static const` for the older
C standards. Use the newly introduced macro for the NS_PER_SEC and
friends time constants.
New version of clang (19) has introduced a stricter checks when mixing
integer (and float types) with enums. In this case, we used enum {}
as C17 doesn't have constexpr yet. Change the time conversion constants
to be static const unsigned int instead of enum values.
Since the enable_fips_mode() now resides inside the isc_tls unit, BIND 9
would fail to compile when FIPS mode was enabled as the DST subsystem
logging functions were missing.
Move the crypto library logging functions from the openssl_link unit to
isc_tls unit and enhance it, so it can now be used from both places
keeping the old dst__openssl_toresult* macros alive.
When putting the 48-bit number into a fixed-size buffer that's exactly 6
bytes, the assertion failure would occur as the 48-bit number is
internally represented as 64-bit number and the code was checking if
there is enough space for `sizeof(val)`. This causes assertion failure
when otherwise valid TSIG signature has a bad timing information.
Specify the size of the argument explicitly, so the 48-bit number
doesn't require 8-byte long buffer.
Add an isc_queue implementation that hides the gory details of cds_wfcq
into more neat API. The same caveats as with cds_wfcq.
TODO: Add documentation to the API.
The detach function declaration in `ISC__REFCOUNT_TRACE_DECL` had an
returned an accidental implicit int. While not allowed since C99, it
became an error by default in GCC 14.
`ISC_REFCOUNT_TRACE_IMPL` and `ISC_REFCOUNT_STATIC_TRACE_IMPL` expanded
into the wrong macros, trying to declare it again with the wrong number
of parameters.
Returning the value allows for better high-water tracking without
running into edge cases like the following:
0. The counter is at value X
1. Increment the value (X+1)
2. The value is decreased multiple times in another threads (X+1-Y)
3. Get the value (X+1-Y)
4. Update-if-greater misses the X+1 value which should have been the
high-water
isc_loop() can now take its place.
This also requires changes to the test harness - instead of running the
setup and teardown outside of th main loop, we now schedule the setup
and teardown to run on the loop (via isc_loop_setup() and
isc_loop_teardown()) - this is needed because the new the isc_loop()
call has to be run on the active event loop, but previously the
isc_loop_current() (and the variants like isc_loop_main()) would work
even outside of the loop because it needed just isc_tid() to work, but
not the full loop (which was mainly true for the main thread).
if we had a method to get the running loop, similar to how
isc_tid() gets the current thread ID, we can simplify loop
and loopmgr initialization.
remove most uses of isc_loop_current() in favor of isc_loop().
in some places where that was the only reason to pass loopmgr,
remove loopmgr from the function parameters.
After removing sockaddr_unix from isc_sockaddr, we can also remove
sockaddr_storage and reduce the isc_sockaddr size from 152 bytes to just
48 bytes needed to hold IPv6 addresses.
