for testing purposes, we need to be able to specify a library path from
which to load the dnsrps implementation. this can now be done with the
"dnsrps-library" option.
DNSRPS can now be enabled in configure regardless of whether librpz.so
is currently installed on the system.
With a newline before the :suppress_grammar: directive, it wasn't
actually interpreted as a directive, but rather as node content.
Therefore, the directive was ignored and the grammar was incorrectly
printed out.
These options and zone type were created to address the
SiteFinder controversy, in which certain TLD's redirected queries
rather than returning NXDOMAIN. since TLD's are now DNSSEC-signed,
this is no longer likely to be a problem.
The deprecation message for 'type delegation-only' is issued from
the configuration checker rather than the parser. therefore,
isccfg_check_namedconf() has been modified to take a 'nodeprecate'
parameter to suppress the warning when named-checkconf is used with
the command-line option to ignore warnings on deprecated options (-i).
[func] BIND now requires liburcu for lock-free data structures
and concurrent safe memory reclamation. It replaces the
home-grown lock-free linked list and QSBR machinery
added in changes 6108 and 6109. The qp-trie code has
been adjusted to use liburcu.
BIND needs a collection of standard lock-free data structures,
which we can find in liburcu, along with its RCU safe memory
reclamation machinery. We will use liburcu's QSBR variant instead
of the home-grown isc_qsbr.
without diffie-hellman TKEY negotiation, some other code is
now effectively dead or unnecessary, and can be cleaned up:
- the rndc tsig-list and tsig-delete commands.
- a nonoperational command-line option to dnssec-keygen that
was documented as being specific to DH.
- the section of the ARM that discussed TKEY/DH.
- the functions dns_tkey_builddeletequery(), processdeleteresponse(),
and tkey_processgssresponse(), which are unused.
Completely remove the TKEY Mode 2 (Diffie-Hellman Exchanged Keying) from
BIND 9 (from named, named.conf and all the tools). The TKEY usage is
fringe at best and in all known cases, GSSAPI is being used as it should.
The draft-eastlake-dnsop-rfc2930bis-tkey specifies that:
4.2 Diffie-Hellman Exchanged Keying (Deprecated)
The use of this mode (#2) is NOT RECOMMENDED for the following two
reasons but the specification is still included in Appendix A in case
an implementation is needed for compatibility with old TKEY
implementations. See Section 4.6 on ECDH Exchanged Keying.
The mixing function used does not meet current cryptographic
standards because it uses MD5 [RFC6151].
RSA keys must be excessively long to achieve levels of security
required by current standards.
We might optionally implement Elliptic Curve Diffie-Hellman (ECDH) key
exchange mode 6 if the draft ever reaches the RFC status. Meanwhile the
insecure DH mode needs to be removed.
The first working multi-threaded qp-trie was stuck with an unpleasant
trade-off:
* Use `isc_rwlock`, which has acceptable write performance, but
terrible read scalability because the qp-trie made all accesses
through a single lock.
* Use `liburcu`, which has great read scalability, but terrible
write performance, because I was relying on `rcu_synchronize()`
which is rather slow. And `liburcu` is LGPL.
To get the best of both worlds, we need our own scalable read side,
which we now have with `isc_qsbr`. And we need to modify the write
side so that it is not blocked by readers.
Better write performance requires an async cleanup function like
`call_rcu()`, instead of the blocking `rcu_synchronize()`. (There
is no blocking cleanup in `isc_qsbr`, because I have concluded
that it would be an attractive nuisance.)
Until now, all my multithreading qp-trie designs have been based
around two versions, read-only and mutable. This is too few to
work with asynchronous cleanup. The bare minimum (as in epoch
based reclamation) is three, but it makes more sense to support an
arbitrary number. Doing multi-version support "properly" makes
fewer assumptions about how safe memory reclamation works, and it
makes snapshots and rollbacks simpler.
To avoid making the memory management even more complicated, I
have introduced a new kind of "packed reader node" to anchor the
root of a version of the trie. This is simpler because it re-uses
the existing chunk lifetime logic - see the discussion under
"packed reader nodes" in `qp_p.h`.
I have also made the chunk lifetime logic simpler. The idea of a
"generation" is gone; instead, chunks are either mutable or
immutable. And the QSBR phase number is used to indicate when a
chunk can be reclaimed.
Instead of the `shared_base` flag (which was basically a one-bit
reference count, with a two version limit) the base array now has a
refcount, which replaces the confusing ad-hoc lifetime logic with
something more familiar and systematic.
A qp-trie is a kind of radix tree that is particularly well-suited to
DNS servers. I invented the qp-trie in 2015, based on Dan Bernstein's
crit-bit trees and Phil Bagwell's HAMT. https://dotat.at/prog/qp/
This code incorporates some new ideas that I prototyped using
NLnet Labs NSD in 2020 (optimizations for DNS names as keys)
and 2021 (custom allocator and garbage collector).
https://dotat.at/cgi/git/nsd.git
The BIND version of my qp-trie code has a number of improvements
compared to the prototype developed for NSD.
* The main omission in the prototype was the very sketchy outline of
how locking might work. Now the locking has been implemented,
using a reader/writer lock and a mutex. However, it is designed to
benefit from liburcu if that is available.
* The prototype was designed for two-version concurrency, one
version for readers and one for the writer. The new code supports
multiversion concurrency, to provide a basis for BIND's dbversion
machinery, so that updates are not blocked by long-running zone
transfers.
* There are now two kinds of transaction that modify the trie: an
`update` aims to support many very small zones without wasting
memory; a `write` avoids unnecessary allocation to help the
performance of many small changes to the cache.
* There is also a single-threaded interface for situations where
concurrent access is not necessary.
* The API makes better use of types to make it more clear which
operations are permitted when.
* The lookup table used to convert a DNS name to a qp-trie key is
now initialized by a run-time constructor instead of a programmer
using copy-and-paste. Key conversion is more flexible, so the
qp-trie can be used with keys other than DNS names.
* There has been much refactoring and re-arranging things to improve
the terminology and order of presentation in the code, and the
internal documentation has been moved from a comment into a file
of its own.
Some of the required functionality has been stripped out, to be
brought back later after the basics are known to work.
* Garbage collector performance statistics are missing.
* Fancy searches are missing, such as longest match and
nearest match.
* Iteration is missing.
* Search for update is missing, for cases where the caller needs to
know if the value object is mutable or not.
`libirs` used to be a reference implementation of `getaddrinfo` and
related modern resolver APIs. It was stripped down in BIND 9.18
leaving only the `irs_resconf` module, which parses
`/etc/resolv.conf`. I have kept its include path and namespace prefix,
so it remains a little fragment of libirs now embedded in libdns.
This "quiescent state based reclamation" module provides support for
the qp-trie module in dns/qp. It is a replacement for liburcu, written
without reference to the urcu source code, and in fact it works in a
significantly different way.
A few specifics of BIND make this variant of QSBR somewhat simpler:
* We can require that wait-free access to a qp-trie only happens in
an isc_loop callback. The loop provides a natural quiescent state,
after the callbacks are done, when no qp-trie access occurs.
* We can dispense with any API like rcu_synchronize(). In practice,
it takes far too long to wait for a grace period to elapse for each
write to a data structure.
* We use the idea of "phases" (aka epochs or eras) from EBR to
reduce the amount of bookkeeping needed to track memory that is no
longer needed, knowing that the qp-trie does most of that work
already.
I considered hazard pointers for safe memory reclamation. They have
more read-side overhead (updating the hazard pointers) and it wasn't
clear to me how to nicely schedule the cleanup work. Another
alternative, epoch-based reclamation, is designed for fine-grained
lock-free updates, so it needs some rethinking to work well with the
heavily read-biased design of the qp-trie. QSBR has the fastest read
side of the basic SMR algorithms (with no barriers), and fits well
into a libuv loop. More recent hybrid SMR algorithms do not appear to
have enough benefits to justify the extra complexity.
Add a singly-linked stack that supports lock-free prepend and drain (to
empty the list and clean up its elements). Intended for use with QSBR
to collect objects that need safe memory reclamation, or any other user
that works with adding objects to the stack and then draining them in
one go like various work queues.
In <isc/atomic.h>, add an `atomic_ptr()` macro to make type
declarations a little less abominable, and clean up a duplicate
definition of `atomic_compare_exchange_strong_acq_rel()`
removed references in code comments, doc/dev documentation, etc, to
isc_task, isc_timer_reset(), and isc_timertype_inactive. also removed a
coccinelle patch related to isc_timer_reset() that was no longer needed.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
- removed documentation of -S option from named man page
- removed documentation of reserved-sockets from ARM
- simplified documentation of dnssec-secure-to-insecure - it
now just says it's obsolete rather than describing what it
doesn't do anymore
- marked three formerly obsolete options as ancient:
parent-registration-delay, reserved-sockets, and
suppress-initial-notify
We don't need them in the repo, it's sufficient if we pregenerate them
while preparing the tarball. That way we don't have overhead while
modifying them but they are still available for installations without
Sphinx.
I assume that this will make rebases and cherry-picks across branches
easier, with less trial and error churn required in the CI.
It's implemented in the way that we build the manpages only when we
either have pregenerated pages available at the configure time or
sphinx-build is installed and working.
The implementation of UDP recvmmsg in libuv 1.35 and 1.36 is
incomplete and could cause assertion failure under certain
circumstances.
Modify the configure and runtime checks to report a fatal error when
trying to compile or run with the affected versions.
The RHEL (and clones) 7 will reach EOL in June 2024, shortly after BIND
9.20 will be released. Drop the support for building on those
platforms, so we can use features of modern operating systems - newer
compiler that supports at least subset of C23 and OpenSSL 1.1/3.0.
This will simplify some of the code that we are using in BIND 9.
the built-in trust anchors in named and delv are sufficent for
validation. named still needs to be able to load trust anchors from
a bind.keys file for testing purposes, but it doesn't need to be
the default behavior.
we now only load trust anchors from a file if explicitly specified
via the "bindkeys-file" option in named or the "-a" command line
argument to delv. documentation has been cleaned up to remove references
to /etc/bind.keys.
Closes#3850.
