The RFC7828 specifies the keepalive interval to be 16-bit, specified in
units of 100 milliseconds and the configuration options tcp-*-timeouts
are following the suit. The units of 100 milliseconds are very
unintuitive and while we can't change the configuration and presentation
format, we should not follow this weird unit in the API.
This commit changes the isc_nm_(get|set)timeouts() functions to work
with milliseconds and convert the values to milliseconds before passing
them to the function, not just internally.
- style, cleanup, and removal of unnecessary code.
- combined isc_nm_http_add_endpoint() and isc_nm_http_add_doh_endpoint()
into one function, renamed isc_http_endpoint().
- moved isc_nm_http_connect_send_request() into doh_test.c as a helper
function; remove it from the public API.
- renamed isc_http2 and isc_nm_http2 types and functions to just isc_http
and isc_nm_http, for consistency with other existing names.
- shortened a number of long names.
- the caller is now responsible for determining the peer address.
in isc_nm_httpconnect(); this eliminates the need to parse the URI
and the dependency on an external resolver.
- the caller is also now responsible for creating the SSL client context,
for consistency with isc_nm_tlsdnsconnect().
- added setter functions for HTTP/2 ALPN. instead of setting up ALPN in
isc_tlsctx_createclient(), we now have a function
isc_tlsctx_enable_http2client_alpn() that can be run from
isc_nm_httpconnect().
- refactored isc_nm_httprequest() into separate read and send functions.
isc_nm_send() or isc_nm_read() is called on an http socket, it will
be stored until a corresponding isc_nm_read() or _send() arrives; when
we have both halves of the pair the HTTP request will be initiated.
- isc_nm_httprequest() is renamed isc__nm_http_request() for use as an
internal helper function by the DoH unit test. (eventually doh_test
should be rewritten to use read and send, and this function should
be removed.)
- added implementations of isc__nm_tls_settimeout() and
isc__nm_http_settimeout().
- increased NGHTTP2 header block length for client connections to 128K.
- use isc_mem_t for internal memory allocations inside nghttp2, to
help track memory leaks.
- send "Cache-Control" header in requests and responses. (note:
currently we try to bypass HTTP caching proxies, but ideally we should
interact with them: https://tools.ietf.org/html/rfc8484#section-5.1)
Removed redundant 'listener != NULL' check.
1191cleanup:
CID 304936 (#1 of 1): Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking listener suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
1192 if (listener != NULL) {
1193 isc_refcount_decrement(&listener->refs);
1194 listener->exiting = true;
1195 free_listener(listener);
1196 }
Add a new option 'purge-keys' to 'dnssec-policy' that will purge key
files for deleted keys. The option determines how long key files
should be retained prior to removing the corresponding files from
disk.
If set to 0, the option is disabled and 'named' will not remove key
files from disk.
The two memory debugging features: ISC_MEM_DEFAULTFILL
(ISC_MEMFLAG_FILL) and ISC_MEM_TRACKLINES were always enabled in all
builds and the former was only disabled in `named`.
This commits disables those two features in non-developer build to make
the memory allocator significantly faster.
On 24-core machine, the tests would crash because we would run out of
the hazard pointers. We now adjust the number of hazard pointers to be
in the <128,256> interval based on the number of available cores.
Note: This is just a band-aid and needs a proper fix.
The internal memory allocator had an extra code to keep a list of blocks
for small size allocation. This would help to reduce the interactions
with the system malloc as the memory would be already allocated from the
system, but there's an extra cost associated with that - all the
allocations/deallocations must be locked, effectively eliminating any
optimizations in the system allocator targeted at multi-threaded
applications. While the isc_mem API is still using locks pretty heavily,
this is a first step into reducing the memory allocation/deallocation
contention.
updated the parser to allow the "port", "tls" and "http"
paramters to "listen-on" and "listen-on-v6" to be specified in any
order. previously the parser would throw an error if any other order
was used than port, tls, http.
unencrypted DoH connections may be used in some operational
environments where encryption is handled by a reverse proxy,
but it's going to be relatively rare, so we shouldn't make it
easy to do by mistake. this commit changes the syntax for
listen-on and listen-on-v6 so that if "http" is specified, "tls"
must also be specified; for unencrypted listeners, "tls none"
can be used.
This commit fix a leak which was happening every time an inline-signed
zone was added to the configuration, followed by a rndc reconfig.
During the reconfig process, the secure version of every inline-signed
zone was "moved" to a new view upon a reconfig and it "took the raw
version along", but only once the secure version was freed (at shutdown)
was prev_view for the raw version detached from, causing the old view to
be released as well.
This caused dangling references to be kept for the previous view, thus
keeping all resources used by that view in memory.
If an invalid key name (e.g. "a..b") in a primaries list in named.conf
is specified the wrong size is passed to isc_mem_put resulting in the
returned memory being put on the wrong freed list.
*** CID 316784: Incorrect expression (SIZEOF_MISMATCH)
/bin/named/config.c: 636 in named_config_getname()
630 isc_buffer_constinit(&b, objstr, strlen(objstr));
631 isc_buffer_add(&b, strlen(objstr));
632 dns_fixedname_init(&fname);
633 result = dns_name_fromtext(dns_fixedname_name(&fname), &b, dns_rootname,
634 0, NULL);
635 if (result != ISC_R_SUCCESS) {
CID 316784: Incorrect expression (SIZEOF_MISMATCH)
Passing argument "*namep" of type "dns_name_t *" and argument "8UL /* sizeof (*namep) */" to function "isc__mem_put" is suspicious.
636 isc_mem_put(mctx, *namep, sizeof(*namep));
637 *namep = NULL;
638 return (result);
639 }
640 dns_name_dup(dns_fixedname_name(&fname), mctx, *namep);
641
removed the isc_cfg_http_t and isc_cfg_tls_t structures
and the functions that loaded and accessed them; this can
be done using normal config parser functions.
This commit completes the support for DNS-over-HTTP(S) built on top of
nghttp2 and plugs it into the BIND. Support for both GET and POST
requests is present, as required by RFC8484.
Both encrypted (via TLS) and unencrypted HTTP/2 connections are
supported. The latter are mostly there for debugging/troubleshooting
purposes and for the means of encryption offloading to third-party
software (as might be desirable in some environments to simplify TLS
certificates management).
This commit adds stub parser support and tests for:
- an "http" global option for HTTP/2 endpoint configuration.
- command line options to set http or https port numbers by
specifying -p http=PORT or -p https=PORT. (NOTE: this change
only affects syntax; specifying HTTP and HTTPS ports on the
command line currently has no effect.)
- named.conf options "http-port" and "https-port"
- HTTPSPORT environment variable for use when running tests.
Add support for a "tls" key/value pair for zone primaries, referencing
either a "tls" configuration statement or "ephemeral". If set to use
TLS, zones will send SOA and AXFR/IXFR queries over a TLS channel.
This commit allows to specify "disabled" or "off" in
stale-answer-client-timeout statement. The logic to support this
behavior will be added in the subsequent commits.
This commit also ensures an upper bound to stale-answer-client-timeout
which equals to one second less than 'resolver-query-timeout'.
The general logic behind the addition of this new feature works as
folows:
When a client query arrives, the basic path (query.c / ns_query_recurse)
was to create a fetch, waiting for completion in fetch_callback.
With the introduction of stale-answer-client-timeout, a new event of
type DNS_EVENT_TRYSTALE may invoke fetch_callback, whenever stale
answers are enabled and the fetch took longer than
stale-answer-client-timeout to complete.
When an event of type DNS_EVENT_TRYSTALE triggers fetch_callback, we
must ensure that the folowing happens:
1. Setup a new query context with the sole purpose of looking up for
stale RRset only data, for that matters a new flag was added
'DNS_DBFIND_STALEONLY' used in database lookups.
. If a stale RRset is found, mark the original client query as
answered (with a new query attribute named NS_QUERYATTR_ANSWERED),
so when the fetch completion event is received later, we avoid
answering the client twice.
. If a stale RRset is not found, cleanup and wait for the normal
fetch completion event.
2. In ns_query_done, we must change this part:
/*
* If we're recursing then just return; the query will
* resume when recursion ends.
*/
if (RECURSING(qctx->client)) {
return (qctx->result);
}
To this:
if (RECURSING(qctx->client) && !QUERY_STALEONLY(qctx->client)) {
return (qctx->result);
}
Otherwise we would not proceed to answer the client if it happened
that a stale answer was found when looking up for stale only data.
When an event of type DNS_EVENT_FETCHDONE triggers fetch_callback, we
proceed as before, resuming query, updating stats, etc, but a few
exceptions had to be added, most important of which are two:
1. Before answering the client (ns_client_send), check if the query
wasn't already answered before.
2. Before detaching a client, e.g.
isc_nmhandle_detach(&client->reqhandle), ensure that this is the
fetch completion event, and not the one triggered due to
stale-answer-client-timeout, so a correct call would be:
if (!QUERY_STALEONLY(client)) {
isc_nmhandle_detach(&client->reqhandle);
}
Other than these notes, comments were added in code in attempt to make
these updates easier to follow.
These options were ancient or made obsolete a long time ago, it is
safe to remove them.
Also stop printing ancient options, they should be treated the same as
unknown options.
Removed options: lwres, geoip-use-ecs, sit-secret, use-ixfr,
acache-cleaning-interval, acache-enable, additional-from-auth,
additional-from-cache, allow-v6-synthesis, dnssec-enable,
max-acache-size, nosit-udp-size, queryport-pool-ports,
queryport-pool-updateinterval, request-sit, use-queryport-pool, and
support-ixfr.
Coverity Scan identified the following issue in bin/named/zoneconf.c:
*** CID 314969: Control flow issues (DEADCODE)
/bin/named/zoneconf.c: 2212 in named_zone_inlinesigning()
if (!inline_signing && !zone_is_dynamic &&
cfg_map_get(zoptions, "dnssec-policy", &signing) == ISC_R_SUCCESS &&
signing != NULL)
{
if (strcmp(cfg_obj_asstring(signing), "none") != 0) {
inline_signing = true;
>>> CID 314969: Control flow issues (DEADCODE)
>>> Execution cannot reach the expression ""no"" inside this statement: "dns_zone_log(zone, 1, "inli...".
dns_zone_log(
zone, ISC_LOG_DEBUG(1), "inline-signing: %s",
inline_signing
? "implicitly through dnssec-policy"
: "no");
} else {
...
}
}
This is because we first set 'inline_signing = true' and then check
its value in 'dns_zone_log'.
Configure "none" as a builtin policy. Change the 'cfg_kasp_fromconfig'
api so that the 'name' will determine what policy needs to be
configured.
When transitioning a zone from secure to insecure, there will be
cases when a zone with no DNSSEC policy (dnssec-policy none) should
be using KASP. When there are key state files available, this is an
indication that the zone once was DNSSEC signed but is reconfigured
to become insecure.
If we would not run the keymgr, named would abruptly remove the
DNSSEC records from the zone, making the zone bogus. Therefore,
change the code such that a zone will use kasp if there is a valid
dnssec-policy configured, or if there are state files available.
The DNS Flag Day 2020 reduced all the EDNS buffer sizes to 1232. In
this commit, we revert the default value for nocookie-udp-size back to
4096 because the option is too obscure and most people don't realize
that they also need to change this configuration option in addition to
max-udp-size.
This is a part of the works that intends to make the netmgr stable,
testable, maintainable and tested. It contains a numerous changes to
the netmgr code and unfortunately, it was not possible to split this
into smaller chunks as the work here needs to be committed as a complete
works.
NOTE: There's a quite a lot of duplicated code between udp.c, tcp.c and
tcpdns.c and it should be a subject to refactoring in the future.
The changes that are included in this commit are listed here
(extensively, but not exclusively):
* The netmgr_test unit test was split into individual tests (udp_test,
tcp_test, tcpdns_test and newly added tcp_quota_test)
* The udp_test and tcp_test has been extended to allow programatic
failures from the libuv API. Unfortunately, we can't use cmocka
mock() and will_return(), so we emulate the behaviour with #define and
including the netmgr/{udp,tcp}.c source file directly.
* The netievents that we put on the nm queue have variable number of
members, out of these the isc_nmsocket_t and isc_nmhandle_t always
needs to be attached before enqueueing the netievent_<foo> and
detached after we have called the isc_nm_async_<foo> to ensure that
the socket (handle) doesn't disappear between scheduling the event and
actually executing the event.
* Cancelling the in-flight TCP connection using libuv requires to call
uv_close() on the original uv_tcp_t handle which just breaks too many
assumptions we have in the netmgr code. Instead of using uv_timer for
TCP connection timeouts, we use platform specific socket option.
* Fix the synchronization between {nm,async}_{listentcp,tcpconnect}
When isc_nm_listentcp() or isc_nm_tcpconnect() is called it was
waiting for socket to either end up with error (that path was fine) or
to be listening or connected using condition variable and mutex.
Several things could happen:
0. everything is ok
1. the waiting thread would miss the SIGNAL() - because the enqueued
event would be processed faster than we could start WAIT()ing.
In case the operation would end up with error, it would be ok, as
the error variable would be unchanged.
2. the waiting thread miss the sock->{connected,listening} = `true`
would be set to `false` in the tcp_{listen,connect}close_cb() as
the connection would be so short lived that the socket would be
closed before we could even start WAIT()ing
* The tcpdns has been converted to using libuv directly. Previously,
the tcpdns protocol used tcp protocol from netmgr, this proved to be
very complicated to understand, fix and make changes to. The new
tcpdns protocol is modeled in a similar way how tcp netmgr protocol.
Closes: #2194, #2283, #2318, #2266, #2034, #1920
* The tcp and tcpdns is now not using isc_uv_import/isc_uv_export to
pass accepted TCP sockets between netthreads, but instead (similar to
UDP) uses per netthread uv_loop listener. This greatly reduces the
complexity as the socket is always run in the associated nm and uv
loops, and we are also not touching the libuv internals.
There's an unfortunate side effect though, the new code requires
support for load-balanced sockets from the operating system for both
UDP and TCP (see #2137). If the operating system doesn't support the
load balanced sockets (either SO_REUSEPORT on Linux or SO_REUSEPORT_LB
on FreeBSD 12+), the number of netthreads is limited to 1.
* The netmgr has now two debugging #ifdefs:
1. Already existing NETMGR_TRACE prints any dangling nmsockets and
nmhandles before triggering assertion failure. This options would
reduce performance when enabled, but in theory, it could be enabled
on low-performance systems.
2. New NETMGR_TRACE_VERBOSE option has been added that enables
extensive netmgr logging that allows the software engineer to
precisely track any attach/detach operations on the nmsockets and
nmhandles. This is not suitable for any kind of production
machine, only for debugging.
* The tlsdns netmgr protocol has been split from the tcpdns and it still
uses the old method of stacking the netmgr boxes on top of each other.
We will have to refactor the tlsdns netmgr protocol to use the same
approach - build the stack using only libuv and openssl.
* Limit but not assert the tcp buffer size in tcp_alloc_cb
Closes: #2061
Since the queries sent towards root and TLD servers are now included in
the count (as a result of the fix for CVE-2020-8616),
"max-recursion-queries" has a higher chance of being exceeded by
non-attack queries. Increase its default value from 75 to 100.
When generating a new salt, compare it with the previous NSEC3
paremeters to ensure the new parameters are different from the
previous ones.
This moves the salt generation call from 'bin/named/*.s' to
'lib/dns/zone.c'. When setting new NSEC3 parameters, you can set a new
function parameter 'resalt' to enforce a new salt to be generated. A
new salt will also be generated if 'salt' is set to NULL.
Logging salt with zone context can now be done with 'dnssec_log',
removing the need for 'dns_nsec3_log_salt'.
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
The 'rndc signing' command allows you to manipulate the private
records that are used to store signing state. Don't use these with
'dnssec-policy' as such manipulations may violate the policy (if you
want to change the NSEC3 parameters, change the policy and reconfig).
When doing 'rndc reconfig', named may complain about a zone not being
reusable because it has a raw version of the zone, and the new
configuration has not set 'inline-signing'. However, 'inline-signing'
may be implicitly true if a 'dnssec-policy' is used for the zone, and
the zone is not dynamic.
Improve the check in 'named_zone_reusable'. Create a new function for
checking 'inline-signing' configuration that matches existing code in
'bin/named/server.c'.
Implement support for NSEC3 in dnssec-policy. Store the configuration
in kasp objects. When configuring a zone, call 'dns_zone_setnsec3param'
to queue an nsec3param event. This will ensure that any previous
chains will be removed and a chain according to the dnssec-policy is
created.
Add tests for dnssec-policy zones that uses the new 'nsec3param'
option, as well as changing to new values, changing to NSEC, and
changing from NSEC.
