There are times where you want named-checkconf to check whether the
dnssec-policies should be constrained by the cryptographic algorithms
supported by the operation system or to just accept all possible
algorithms. This provides a mechanism to make that selection.
These options and zone type were created to address the
SiteFinder controversy, in which certain TLD's redirected queries
rather than returning NXDOMAIN. since TLD's are now DNSSEC-signed,
this is no longer likely to be a problem.
The deprecation message for 'type delegation-only' is issued from
the configuration checker rather than the parser. therefore,
isccfg_check_namedconf() has been modified to take a 'nodeprecate'
parameter to suppress the warning when named-checkconf is used with
the command-line option to ignore warnings on deprecated options (-i).
A 'tls' statement can be specified both for individual addresses
and for the whole list (as a default value when an individual
address doesn't have its own 'tls' set), just as it was done
before for the 'port' value.
Create a new function 'print_rawqstring()' to print a string residing
in a 'isc_textregion_t' type parameter.
Create a new function 'copy_string()' to copy a string from a
'cfg_obj_t' object into a 'isc_textregion_t'.
Deprecate the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Also deprecate use-{v4,v6}-udp-ports and avoid-{v4,v6}udp-ports.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
The isccfg_duration_fromtext() function is truncating large numbers
to 32 bits instead of capping or rejecting them, i.e. 64424509445,
which is 0xf00000005, gets parsed as 32-bit value 5 (0x00000005).
Fail parsing a duration if any of its components is bigger than
32 bits. Using those kind of big numbers has no practical use case
for a duration.
The isccfg_duration_toseconds() function can overflow the 32 bit
seconds variable when calculating the duration from its component
parts.
To avoid that, use 64-bit calculation and return UINT32_MAX if the
calculated value is bigger than UINT32_MAX. Again, a number this big
has no practical use case anyway.
The buffer for the generated duration string is limited to 64 bytes,
which, in theory, is smaller than the longest possible generated
duration string.
Use 80 bytes instead, calculated by the '7 x (10 + 1) + 3' formula,
where '7' is the count of the duration's parts (year, month, etc.), '10'
is their maximum length when printed as a decimal number, '1' is their
indicator character (Y, M, etc.), and 3 is two more indicators (P and T)
and the terminating NUL character.
Most of the settings (durations) are already inheriting from the default
because they use the constants from lib/dns/kasp.h. We need them as
constants so we can use them in named-checkconf to verify the policy
parameters.
The NSEC(3) parameters and keys should come from the actual default
policy. Change the call to cfg_kasp_fromconfig() to include the default
kasp. We also no longer need to corner case where config is NULL we load
the built-in policy: the built-in policies are now loaded when config is
set to named_g_config.
Finally, add a debug log (it is useful to see which policies are being
loaded).
Update the defaultconf with the built-in policies. These will now be
printed with "named -C".
Change the defines in kasp.h to be strings, so they can be concatenated
in the defaultconf. This means when creating a kasp structure, we no
longer initialize the defaults (this is fine because only kaspconf.c
uses dns_kasp_create() and it inherits from the default policy).
In kaspconf.c, the default values now need to be parsed from string.
Introduce some variables so we don't need to do get_duration multiple
times on the same configuration option.
Finally, clang-format-14 decided to do some random formatting changes.
"masters" and "default-masters" are now flagged so they will
not be included in the named.conf man page, despite being
accepted as valid options by the parser for backward
compatibiility.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Unify the header guard style and replace the inconsistent include guards
with #pragma once.
The #pragma once is widely and very well supported in all compilers that
BIND 9 supports, and #pragma once was already in use in several new or
refactored headers.
Using simpler method will also allow us to automate header guard checks
as this is simpler to programatically check.
For reference, here are the reasons for the change taken from
Wikipedia[1]:
> In the C and C++ programming languages, #pragma once is a non-standard
> but widely supported preprocessor directive designed to cause the
> current source file to be included only once in a single compilation.
>
> Thus, #pragma once serves the same purpose as include guards, but with
> several advantages, including: less code, avoidance of name clashes,
> and sometimes improvement in compilation speed. On the other hand,
> #pragma once is not necessarily available in all compilers and its
> implementation is tricky and might not always be reliable.
1. https://en.wikipedia.org/wiki/Pragma_once
The 'new default' option was introduced in 2002 to signal that a
default option had changed its default value, in this specific case
the value for 'auth-nxdomain'. However, this default has been unchanged
for 18 years now, and logging that the default has changed does not
have significant value nowadays.
This is also a good example that the clause flag 'new default' is
broken: it is easy to get out of date.
It is also easy to forget, because we have changed the default value
for 'max-stale-ttl' and haven't been flagging it with 'new default'
Also, if the operator cares for a specific value it should set it
explicitly. Using the default is telling the software: use whatever
you think is best, and this may change over time. Default value
changes should be mentioned in the release note, but do not require
further special treatment.
The clause flags 'not implented' and 'not implemented yet' are the
same as 'obsoleted' when it comes to behavior. These options will
now be treated similar as obsoleted (the idea being that if an
option is implemented it should be functional).
The new options for DoT are new options and rather than flagging them
obsolete, they should have been flagged as experimental, signalling
that these options are subject to change in the future.
Configure "none" as a builtin policy. Change the 'cfg_kasp_fromconfig'
api so that the 'name' will determine what policy needs to be
configured.
When transitioning a zone from secure to insecure, there will be
cases when a zone with no DNSSEC policy (dnssec-policy none) should
be using KASP. When there are key state files available, this is an
indication that the zone once was DNSSEC signed but is reconfigured
to become insecure.
If we would not run the keymgr, named would abruptly remove the
DNSSEC records from the zone, making the zone bogus. Therefore,
change the code such that a zone will use kasp if there is a valid
dnssec-policy configured, or if there are state files available.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
There was a missing indirection for the pluginlist_cb_t *callback in the
declaration of the cfg_pluginlist_foreach function. Reported by MSVC as:
lib\isccfg\parser.c(4057): warning C4028: formal parameter 4 different from declaration
The keyword 'unlimited' can be used instead of PT0S which means the
same but is more comprehensible for users.
Also fix some redundant "none" parameters in the kasp test.
This commit introduces the initial `dnssec-policy` configuration
statement. It has an initial set of options to deal with signature
and key maintenance.
Add some checks to ensure that dnssec-policy is configured at the
right locations, and that policies referenced to in zone statements
actually exist.
Add some checks that when a user adds the new `dnssec-policy`
configuration, it will no longer contain existing DNSSEC
configuration options. Specifically: `inline-signing`,
`auto-dnssec`, `dnssec-dnskey-kskonly`, `dnssec-secure-to-insecure`,
`update-check-ksk`, `dnssec-update-mode`, `dnskey-sig-validity`,
and `sig-validity-interval`.
Test a good kasp configuration, and some bad configurations.
The ttlval configuration types are replaced by duration configuration
types. The duration is an ISO 8601 duration that is going to be used
for DNSSEC key timings such as key lifetimes, signature resign
intervals and refresh periods, etc. But it is also still allowed to
use the BIND ttlval ways of configuring intervals (number plus
optional unit).
A duration is stored as an array of 7 different time parts.
A duration can either be expressed in weeks, or in a combination of
the other datetime indicators.
Add several unit tests to ensure the correct value is parsed given
different string values.
- this required modification to the code that generates grammar text for
the documentation, because the "dnssec-lookaside" option spanned more
than one line in doc/misc/options, so grepping out only the lines
marked "// obsolete" didn't remove the whole option. this commit adds
an option to cfg_test to print named.conf clauses only if they don't
have the obsolete, ancient, test-only, or not-yet-implemented flags
set.
Adds a new option to named-checkconf, -i. If set, named-checkconf
will not warn you about deprecated options. This allows people
to use named-checkconf in automated deployment precoesses where an
operator only cares if their conf is valid, even if it is not optimal.
This was added as a request as part of introducing a policy on
removing named.conf options.
- options that were flagged as obsolete or not implemented in 9.0.0
are now flagged as "ancient", and are a fatal error
- the ARM has been updated to remove these, along with other
obsolete descriptions of BIND 8 behavior
- the log message for obsolete options explicitly recommends removal
Add a new libisccfg function, cfg_pluginlist_foreach(), which allows an
arbitrary callback to be invoked for every "plugin" stanza present in a
configuration object. Use this function for both loading plugins and
checking their configuration in order to reduce duplication of
configuration processing code present in bin/named/server.c and
lib/bind9/check.c.
- make some cfg-parsing functions global so they can be run
from filter-aaaa.so
- add filter-aaaa options to the hook module's parser
- mark filter-aaaa options in named.conf as obsolete, remove
from named and checkconf, and update the filter-aaaa test not to
use checkconf anymore
- remove filter-aaaa-related struct members from dns_view
