When calculating the RRSIG validity, jitter is now derived from the
config option rather than from the refresh value.
(cherry picked from commit 67f403a423)
The dns_cache_flush() drops the old database and creates a new one, but
it forgets to create the task(s) that runs the node pruning and cleaning
the rbtdb when flushing it next time. This causes the cleaning to skip
cleaning the parent nodes (with .down == NULL) leading to increased
memory usage over time until the database is unable to keep up and just
stays overmem all the time.
Previously, rbtdb->task had quantum of 1 because it was originally used
just for freeing RBTDB contents, which can happen on a "best effort"
basis (does not need to be prioritized). However, when tree pruning was
implemented, it also started sending events to that task, enabling the
latter to become clogged up with a significant event backlog because it
only pruned a single RBTDB node per event.
To prioritize tree pruning (as it is necessary for enforcing the
configured memory use limit for the cache memory context), create a
second task with a virtually unlimited quantum (UINT_MAX) and send the
tree-pruning events to this new task, to ensure that all nodes scheduled
for pruning will be processed before further nodes are queued in a
similar fashion.
This change enables dropping the prunenodes list and restoring the
originally-used logic that allocates and sends a separate event for each
node to prune.
The log message for commit a9af1ac5ae
explained:
In some older BIND 9 branches, the extra queuing overhead eliminated by
this change could be remotely exploited to cause excessive memory use.
Due to architectural shift, this branch is not vulnerable to that issue,
but applying the fix to the latter is nevertheless deemed prudent for
consistency and to make the code future-proof.
However, it turned out that having a single queue for the nodes to be
pruned increased lock contention to a level where cleaning up nodes from
the RBTDB took too long, causing the amount of memory used by the cache
to grow indefinitely over time.
This commit reverts the change to the pruning mechanism introduced by
commit a9af1ac5ae as BIND branches newer
than 9.16 were not affected by the excessive event queueing overhead
issue mentioned in the log message for the above commit.
(cherry picked from commit eed17611d8)
- the DNS_DB_NSEC3ONLY and DNS_DB_NONSEC3 flags are mutually
exclusive; it never made sense to set both at the same time.
to enforce this, it is now a fatal error to do so. the
dbiterator implementation has been cleaned up to remove
code that treated the two as independent: if nonsec3 is
true, we can be certain nsec3only is false, and vice versa.
- previously, iterating a database backwards omitted
NSEC3 records even if DNS_DB_NONSEC3 had not been set. this
has been corrected.
- when an iterator reaches the origin node of the NSEC3 tree, we
need to skip over it and go to the next node in the sequence.
the NSEC3 origin node is there for housekeeping purposes and
never contains data.
- the dbiterator_test unit test has been expanded, several
incorrect expectations have been fixed. (for example, the
expected number of iterations has been reduced by one; we were
previously counting the NSEC3 origin node and we should not
have been doing so.)
(cherry picked from commit e40fd4ed06)
Don't parse the crypto data before parsing and matching the id and the
algorithm for consecutive DNSKEYs. This allows us to parse the RData
only in case the other parameters match allowing us to skip keys that
are of no interest to us, but still would consume precious CPU time by
parsing possibly garbage with OpenSSL.
Add a function that checks whether a DNSKEY, CDNSKEY, or CDS record
belongs to a key that is being used for signing.
(cherry picked from commit 3b6e9a5fa7)
The following code block repeats quite often:
if (rdata.type == dns_rdatatype_dnskey ||
rdata.type == dns_rdatatype_cdnskey ||
rdata.type == dns_rdatatype_cds)
Introduce a new function to reduce the repetition.
(cherry picked from commit ef58f2444f)
Instead of issuing a separate isc_task_send() call for every RBTDB node
that triggers tree pruning, maintain a list of nodes from which tree
pruning can be started from and only issue an isc_task_send() call if
pruning has not yet been triggered by another RBTDB node.
In some older BIND 9 branches, the extra queuing overhead eliminated by
this change could be remotely exploited to cause excessive memory use.
Due to architectural shift, this branch is not vulnerable to that issue,
but applying the fix to the latter is nevertheless deemed prudent for
consistency and to make the code future-proof.
(cherry picked from commit 24381cc36d)
When parsing messages use a hashtable instead of a linear search to
reduce the amount of work done in findname when there's more than one
name in the section.
There are two hashtables:
1) hashtable for owner names - that's constructed for each section when
we hit the second name in the section and destroyed right after parsing
that section;
2) per-name hashtable - for each name in the section, we construct a new
hashtable for that name if there are more than one rdataset for that
particular name.
(cherry picked from commit b8a9631754)
As we are in overmem state we want to free more memory than we are
adding so we need to add in an allowance for the rbtnodes that may
have been added and the names stored with them. There is the node
for the owner name and a possible ENT node if there was a node split.
(cherry picked from commit 7e462c2b26)
The maximum DNS message size is 65535 octets. Check that the buffer
being passed to dns_message_renderbegin does not exceed this as the
compression code assumes that all offsets are no bigger than this.
(cherry picked from commit a069513234)
The dns__catz_update_cb() does not expect that 'catzs->zones'
can become NULL during shutdown.
Add similar checks in the dns__catz_update_cb() and dns_catz_zone_get()
functions to protect from such a case. Also add an INSIST in the
dns_catz_zone_add() function to explicitly state that such a case
is not expected there, because that function is called only during a
reconfiguration.
(cherry picked from commit 4eb4fa288c)
In units that support detailed reference tracing via ISC_REFCOUNT
macros, we were doing:
/* Define to 1 for detailed reference tracing */
#undef <unit>_TRACE
This would prevent using -D<unit>_TRACE=1 in the CFLAGS.
Convert the above mentioned snippet with just a comment how to enable
the detailed reference tracing:
/* Add -D<unit>_TRACE=1 to CFLAGS for detailed reference tracing */
(cherry picked from commit 6afa961534)
Allow larger TTL values in zones that go insecure. This is necessary
because otherwise the zone will not be loaded due to the max-zone-ttl
of P1D that is part of the current insecure policy.
In the keymgr.c code, default back to P1D if the max-zone-ttl is set
to zero.
(cherry picked from commit dc6dafdad1)
The dns_zone_catz_enable_db() and dns_zone_catz_disable_db()
functions can race with similar operations in the catz module
because there is no synchronization between the threads.
Add catz functions which use the view's catalog zones' lock
when registering/unregistering the database update notify callback,
and use those functions in the dns_zone module, instead of doing it
directly.
(cherry picked from commit 6f1f5fc307)
in the past there was overlap between the fields used
as resolver fetch options and ADB addrinfo flags. this has
mostly been eliminated; now we can clean up the rest of
it and remove some confusing comments.
(cherry picked from commit 0955cf1af5)
The ability to read legacy HMAC-MD5 K* keyfile pairs using algorithm
number 157 was accidentally lost when the algorithm numbers were
consolidated into a single block, in commit
09f7e0607a.
The assumption was that these algorithm numbers were only known
internally, but they were also used in key files. But since HMAC-MD5
got renumbered from 157 to 160, legacy HMAC-MD5 key files no longer
work.
Move HMAC-MD5 back to 157 and GSSAPI back to 160. Add exception for
GSSAPI to list_hmac_algorithms.
(cherry picked from commit 3f93d3f757)
If the resolver received a FORMERR response to a request with
an DNS COOKIE option present that echoes the option back, resend
the request without an DNS COOKIE option present.
(cherry picked from commit f3b24ba789)
This counter indicates the number of the resolver's spilled
queries due to reaching the clients per query quota.
(cherry picked from commit 04648d7c2f)
it was possible to add a TSIG key to more than one TSIG
keyring at a time, and this was in fact happening with the
session key, which was generated once and then added to the
keyrings for each view as it was configured.
this has been corrected and a REQUIRE added to dns_tsigkeyring_add()
to prevent it from happening again.
After the dns_xfrin was changed to use network manager, the maximum
global (max-transfer-time-in) and idle (max-transfer-idle-in) times for
incoming transfers were turned inoperational because of missing
implementation.
Restore this functionality by implementing the timers for the incoming
transfers.
(cherry picked from commit d2377f8e04)
The isc_fsaccess API was created to hide the implementation details
between POSIX and Windows APIs. As we are not supporting the Windows
APIs anymore, it's better to drop this API used in the DST part.
Moreover, the isc_fsaccess was setting the permissions in an insecure
manner - it operated on the filename, and not on the file descriptor
which can lead to all kind of attacks if unpriviledged user has read (or
even worse write) access to key directory.
Replace the code that operates on the private keys with code that uses
mkstemp(), fchmod() and atomic rename() at the end, so at no time the
private key files have insecure permissions.
(cherry picked from commit 263d232c79)
dns_dnssec_updatekeys's 'report' could be called with invalid arguments
which the compiler should be be able to detect.
(cherry picked from commit 7a0a2fc3e4)
There are leftovers from the previous refactoring effort, which left
some function declarations and comments in the header file unchanged.
Finish the renaming.
(cherry picked from commit 580ef2e18f)
Instead of holding the catzs->lock the whole time we process the catz
update, only hold it for hash table lookup and then release it. This
should unblock any other threads that might be processing updates to
catzs triggered by extra incoming transfer.
(cherry picked from commit b1cd4a066a)
Offload catalog zone processing so that the network manager threads
are not interrupted by a large catalog zone update.
Introduce a new 'updaterunning' state alongside with 'updatepending',
like it is done in the RPZ module.
Note that the dns__catz_update_cb() function currently holds the
catzs->lock during the whole process, which is far from being optimal,
but the issue is going to be addressed separately.
(cherry picked from commit 0b96c9234f)
This change should make sure that catalog zone update processing
doesn't happen when the catalog zone is being shut down. This
should help avoid races when offloading the catalog zone updates
in the follow-up commit.
(cherry picked from commit 246b7084d6)
* Change 'dns_catz_new_zones()' function's prototype (the order of the
arguments) to synchronize it with the similar function in rpz.c.
* Rename 'refs' to 'references' in preparation of ISC_REFCOUNT_*
macros usage for reference tracking.
* Unify dns_catz_zone_t naming to catz, and dns_catz_zones_t naming to
catzs, following the logic of similar changes in rpz.c.
* Use C compound literals for structure initialization.
* Synchronize the "new zone version came too soon" log message with the
one in rpz.c.
* Use more of 'sizeof(*ptr)' style instead of the 'sizeof(type_t)' style
expressions when allocating or freeing memory for 'ptr'.
(cherry picked from commit 8cb79fec9d)
The dns_rpz_zones structure was using .refs and .irefs for strong and
weak reference counting. Rewrite the unit to use just a single
reference counting + shutdown sequence (dns_rpz_destroy_rpzs) that must
be called by the creator of the dns_rpz_zones_t object. Remove the
reference counting from the dns_rpz_zone structure as it is not needed
because the zone objects are fully embedded into the dns_rpz_zones
structure and dns_rpz_zones_t object must never be destroyed before all
dns_rpz_zone_t objects.
The dns_rps_zones_t reference counting uses the new ISC_REFCOUNT_TRACE
capability - enable by defining DNS_RPZ_TRACE in the dns/rpz.h header.
Additionally, add magic numbers to the dns_rpz_zone and dns_rpz_zones
structures.
(cherry picked from commit 77659e7392)
Previously, the RPZ updates ran quantized on the main nm_worker loops.
As the quantum was set to 1024, this might lead to service
interruptions when large RPZ update was processed.
Change the RPZ update process to run as the offloaded work. The update
and cleanup loops were refactored to do as little locking of the
maintenance lock as possible for the shortest periods of time and the db
iterator is being paused for every iteration, so we don't hold the rbtdb
tree lock for prolonged periods of time.
(cherry picked from commit f106d0ed2b)
Previously dns_rpz_add() were passed dns_rpz_zones_t and index to .zones
array. Because we actually attach to dns_rpz_zone_t, we should be using
the local pointer instead of passing the index and "finding" the
dns_rpz_zone_t again.
Additionally, dns_rpz_add() and dns_rpz_delete() were used only inside
rpz.c, so make them static.
(cherry picked from commit b6e885c97f)
Do a general cleanup of lib/dns/rpz.c style:
* Removed deprecated and unused functions
* Unified dns_rpz_zone_t naming to rpz
* Unified dns_rpz_zones_t naming to rpzs
* Add and use rpz_attach() and rpz_attach_rpzs() functions
* Shuffled variables to be more local (cppcheck cleanup)
(cherry picked from commit 840179a247)
isc_bind9 was a global bool used to indicate whether the library
was being used internally by BIND or by an external caller. external
use is no longer supported, but the variable was retained for use
by dyndb, which needed it only when being built without libtool.
building without libtool is *also* no longer supported, so the variable
can go away.
(cherry picked from commit 935879ed11)
Instead of using an extra rarely-used paramater to dns_clientinfo_init()
to set ECS information for a client, this commit adds a function
dns_clientinfo_setecs() which can be called only when ECS is needed.
(cherry picked from commit ff3fdaa424)
Include isc_rwlocktype_t type definition in zt.h
See merge request isc-projects/bind9!7376
(cherry picked from commit d7bcdf8bd6)
395d6fca Include isc_rwlocktype_t type definition in zt.h
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
(cherry picked from commit 916ea26ead)
