Use the (1 << N) form for defining the flags, in order to avoid
errors like the one fixed in the previous commit.
Also convert the definitions to an enum, as done in some of our
recent refactoring work.
(cherry picked from commit 0d7c7777da)
The DNS_GETDB_STALEFIRST flag is defined as 0x0C, which is the
combination of the DNS_GETDB_PARTIAL (0x04) and the
DNS_GETDB_IGNOREACL (0x08) flags (0x04 | 0x08 == 0x0C) , which is
an obvious error.
All the flags should be power of two, so they don't interfere with
each other. Fix the DNS_GETDB_STALEFIRST flag by setting it to 0x10.
(cherry picked from commit be7d8fafe2)
The following code block repeats quite often:
if (rdata.type == dns_rdatatype_dnskey ||
rdata.type == dns_rdatatype_cdnskey ||
rdata.type == dns_rdatatype_cds)
Introduce a new function to reduce the repetition.
(cherry picked from commit ef58f2444f)
If we are in the process of looking for the A records as part of
dns64 processing and the server-stale timeout triggers, redo the
dns64 changes that had been made to the orignal qctx.
(cherry picked from commit 1fcc483df1)
The wrong result value was being saved for resumption with
nxdomain-redirect when performing the fetch. This lead to an assert
when checking that RFC 1918 reverse queries where not leaking to
the global internet.
(cherry picked from commit 9d0fa07c5e)
When serve-stale is enabled and recursive resolution fails, the fallback
to lookup stale data always happens in the cache database. Any
authoritative data is ignored, and only information learned through
recursive resolution is examined.
If there is data in the cache that could lead to an answer, and this can
be just the root delegation, the resolver will iterate further, getting
closer to the answer that can be found by recursing down the root, and
eventually puts the final response in the cache.
Change the fallback to serve-stale to use 'query_getdb()', that finds
out the best matching database for the given query.
(cherry picked from commit 2322425016)
when synthesizing a new CNAME, we now check whether the target
matches the query already being processed. if so, we do not
restart the query; this prevents a waste of resources.
(cherry picked from commit 0ae8b2e056)
The 'refresh_rrset' variable is used to determine if we can detach from
the client. This can cause a hang on shutdown. To fix this, move setting
of the 'nodetach' variable up to where 'refresh_rrset' is set (in
query_lookup(), and thus not in ns_query_done()), and set it to false
when actually refreshing the RRset, so that when this lookup is
completed, the client will be detached.
When a query was aborted because of the recursion quota being exceeded,
but triggered a stale answer response and a stale data refresh query,
it could cause named to loop back where we are iterating and following
a delegation. Having no good answer in cache, we would fall back to
using serve-stale again, use the stale data, try to refresh the RRset,
and loop back again, without ever terminating until crashing due to
stack overflow.
This happens because in the functions 'query_notfound()' and
'query_delegation_recurse()', we check whether we can fall back to
serving stale data. We shouldn't do so if we are already refreshing
an RRset due to having prioritized stale data in cache.
In other words, we need to add an extra check to 'query_usestale()' to
disallow serving stale data if we are currently refreshing a stale
RRset.
As an additional mitigation to prevent looping, we now use the result
code ISC_R_ALREADYRUNNING rather than ISC_R_FAILURE when a recursion
loop is encountered, and we check for that condition in
'query_usestale()' as well.
We recently fixed a bug where in some cases (when following an
expired CNAME for example), named could return SERVFAIL if the target
record is still valid (see isc-projects/bind9#3678, and
isc-projects/bind9!7096). We fixed this by considering non-stale
RRsets as well during the stale lookup.
However, this triggered a new bug because despite the answer from
cache not being stale, the lookup may be triggered by serve-stale.
If the answer from database is not stale, the fix in
isc-projects/bind9!7096 erroneously skips the serve-stale logic.
Add 'answer_found' checks to the serve-stale logic to fix this issue.
(cherry picked from commit bbd163acf6)
Instead of using an extra rarely-used paramater to dns_clientinfo_init()
to set ECS information for a client, this commit adds a function
dns_clientinfo_setecs() which can be called only when ECS is needed.
(cherry picked from commit ff3fdaa424)
Return 'isc_result_t' type value instead of 'bool' to indicate
the actual failure. Rename the function to something not suggesting
a boolean type result. Make changes in the places where the API
function is being used to check for the result code instead of
a boolean value.
(cherry picked from commit 41dc48bfd7)
Although 'dns_fetch_t' fetch can have two associated events, one for
each of 'DNS_EVENT_FETCHDONE' and 'DNS_EVENT_TRYSTALE' types, the
dns_resolver_cancelfetch() function is designed in a way that it
expects only one existing event, which it must cancel, and when it
happens so that 'stale-answer-client-timeout' is enabled and there
are two events, only one of them is canceled, and it results in an
assertion in dns_resolver_destroyfetch(), when it finds a dangling
event.
Change the logic of dns_resolver_cancelfetch() function so that it
cancels both the events (if they exist), and in the right order.
(cherry picked from commit ec2098ca35)
dns_db_findext() asserts if RRSIG is passed to it and
query_lookup_stale() failed to map RRSIG to ANY to prevent this. To
avoid cases like this in the future, move the mapping of SIG and RRSIG
to ANY for qctx->type to qctx_init().
(cherry picked from commit 56eae06418)
Commit 9ffb4a7ba1 causes Clang Static
Analyzer to flag a potential NULL dereference in query_nxdomain():
query.c:9394:26: warning: Dereference of null pointer [core.NullDereference]
if (!qctx->nxrewrite || qctx->rpz_st->m.rpz->addsoa) {
^~~~~~~~~~~~~~~~~~~
1 warning generated.
The warning above is for qctx->rpz_st potentially being a NULL pointer
when query_nxdomain() is called from query_resume(). This is a false
positive because none of the database lookup result codes currently
causing query_nxdomain() to be called (DNS_R_EMPTYWILD, DNS_R_NXDOMAIN)
can be returned by a database lookup following a recursive resolution
attempt. Add a NULL check nevertheless in order to future-proof the
code and silence Clang Static Analyzer.
(cherry picked from commit 07592d1315)
(cherry picked from commit a4547a1093)
With 'stale-answer-enable yes;' and 'stale-answer-client-timeout off;',
consider the following situation:
A CNAME record and its target record are in the cache, then the CNAME
record expires, but the target record is still valid.
When a new query for the CNAME record arrives, and the query fails,
the stale record is used, and then the query "restarts" to follow
the CNAME target. The problem is that the query's multiple stale
options (like DNS_DBFIND_STALEOK) are not reset, so 'query_lookup()'
treats the restarted query as a lookup following a failed lookup,
and returns a SERVFAIL answer when there is no stale data found in the
cache, even if there is valid non-stale data there available.
With this change, query_lookup() now considers non-stale data in the
cache in the first place, and returns it if it is available.
(cherry picked from commit 91a1a8efc5)
Add an options parameter to control what rdatasets are returned when
iteratating over the node. Specific modes will be added later.
(cherry picked from commit 7695c36a5d)
Commit 9ffb4a7ba1 causes Clang Static
Analyzer to flag a potential NULL dereference in query_nxdomain():
query.c:9394:26: warning: Dereference of null pointer [core.NullDereference]
if (!qctx->nxrewrite || qctx->rpz_st->m.rpz->addsoa) {
^~~~~~~~~~~~~~~~~~~
1 warning generated.
The warning above is for qctx->rpz_st potentially being a NULL pointer
when query_nxdomain() is called from query_resume(). This is a false
positive because none of the database lookup result codes currently
causing query_nxdomain() to be called (DNS_R_EMPTYWILD, DNS_R_NXDOMAIN)
can be returned by a database lookup following a recursive resolution
attempt. Add a NULL check nevertheless in order to future-proof the
code and silence Clang Static Analyzer.
(cherry picked from commit 07592d1315)
With 'stale-answer-enable yes;' and 'stale-answer-client-timeout off;',
consider the following situation:
A CNAME record and its target record are in the cache, then the CNAME
record expires, but the target record is still valid.
When a new query for the CNAME record arrives, and the query fails,
the stale record is used, and then the query "restarts" to follow
the CNAME target. The problem is that the query's multiple stale
options (like DNS_DBFIND_STALEOK) are not reset, so 'query_lookup()'
treats the restarted query as a lookup following a failed lookup,
and returns a SERVFAIL answer when there is no stale data found in the
cache, even if there is valid non-stale data there available.
With this change, query_lookup() now considers non-stale data in the
cache in the first place, and returns it if it is available.
(cherry picked from commit 86a80e723f)
RPZ rewrites called dns_db_findext() without passing through the
client database options; as as result, if the client set CD=1,
DNS_DBFIND_PENDINGOK was not used as it should have been, and
cache lookups failed, resulting in failure of the rewrite.
(cherry picked from commit 305a50dbe1)
The incrementing and decrementing of 'ns_statscounter_recursclients'
were not properly balanced: for example, it would be incremented for
a prefetch query but not decremented if the query failed.
This commit ensures that the recursion quota and the recursive clients
counter are always in sync with each other.
Don't attempt to resolve DNS responses for intermediate results. This
may create multiple refreshes and can cause a crash.
One scenario is where for the query there is a CNAME and canonical
answer in cache that are both stale. This will trigger a refresh of
the RRsets because we encountered stale data and we prioritized it over
the lookup. It will trigger a refresh of both RRsets. When we start
recursing, it will detect a recursion loop because the recursion
parameters will eventually be the same. In 'dns_resolver_destroyfetch'
the sanity check fails, one of the callers did not get its event back
before trying to destroy the fetch.
Move the call to 'query_refresh_rrset' to 'ns_query_done', so that it
is only called once per client request.
Another scenario is where for the query there is a stale CNAME in the
cache that points to a record that is also in cache but not stale. This
will trigger a refresh of the RRset (because we encountered stale data
and we prioritized it over the lookup).
We mark RRsets that we add to the message with
DNS_RDATASETATTR_STALE_ADDED to prevent adding a duplicate RRset when
a stale lookup and a normal lookup conflict with each other. However,
the other non-stale RRset when following a CNAME chain will be added to
the message without setting that attribute, because it is not stale.
This is a variant of the bug in #2594. The fix covered the same crash
but for stale-answer-client-timeout > 0.
Fix this by clearing all RRsets from the message before refreshing.
This requires the refresh to happen after the query is send back to
the client.
(cherry picked from commit d939d2ecde)
It is possible to bypass Response Rate Limiting (RRL)
`responses-per-second` limitation using specially crafted wildcard
names, because the current implementation, when encountering a found
DNS name generated from a wildcard record, just strips the leftmost
label of the name before making a key for the bucket.
While that technique helps with limiting random requests like
<random>.example.com (because all those requests will be accounted
as belonging to a bucket constructed from "example.com" name), it does
not help with random names like subdomain.<random>.example.com.
The best solution would have been to strip not just the leftmost
label, but as many labels as necessary until reaching the suffix part
of the wildcard record from which the found name is generated, however,
we do not have that information readily available in the context of RRL
processing code.
Fix the issue by interpreting all valid wildcard domain names as
the zone's origin name concatenated to the "*" name, so they all will
be put into the same bucket.
(cherry picked from commit baa9698c9d)
When checking if we should enable serve-stale, add an early out case
when the result is an error signalling a duplicate query or a query
that would be dropped.
(cherry picked from commit 059a4c2f4d9d3cff371842f43208d021509314fa)
Call dns_view_sfd_find to find the namespace to be used to verify
the covering NSEC records returned for the given QNAME. Check that
the NSEC owner names are within that namespace.
(cherry picked from commit 228dadb026)
The ns_statscounter_recursclients counter was previously only
incremented or decremented if client->recursionquota was non-NULL.
This was harmless, because that value should always be non-NULL if
recursion is enabled, but it made the code slightly confusing.
(cherry picked from commit 0201eab655)
Add DNS extended errors 3 (Stale Answer) and 19 (Stale NXDOMAIN Answer)
to responses. Add extra text with the reason why the stale answer was
returned.
To test, we need to change the configuration such that for the first
set of tests the stale-refresh-time window does not interfer with the
expected extended errors.
(cherry picked from commit c66b9abc0b)
In order to modify the .localhost and .localnets members of the
dns_aclenv, all other processing on the netmgr loops needed to be
stopped using the task exclusive mode. Add the isc_rwlock to the
dns_aclenv, so any modifications to the .localhost and .localnets can be
done under the write lock.
(cherry picked from commit 8138a595d9)
In couple places, we have missed INSIST(0) or ISC_UNREACHABLE()
replacement on some branches with UNREACHABLE(). Replace all
ISC_UNREACHABLE() or INSIST(0) calls with UNREACHABLE().
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
(cherry picked from commit 20f0936cf2)
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
(cherry picked from commit 584f0d7a7e)
Gcc 7+ and Clang 10+ have implemented __attribute__((fallthrough)) which
is explicit version of the /* FALLTHROUGH */ comment we are currently
using.
Add and apply FALLTHROUGH macro that uses the attribute if available,
but does nothing on older compilers.
In one case (lib/dns/zone.c), using the macro revealed that we were
using the /* FALLTHROUGH */ comment in wrong place, remove that comment.
(cherry picked from commit fe7ce629f4)
Commit aab691d512 did not fix all possible
scenarios in which the ns_statscounter_recursclients counter underflows.
The solution implemented therein can be ineffective e.g. when CNAME
chaining happens with prefetching enabled.
Here is an example recursive resolution scenario in which the
ns_statscounter_recursclients counter can underflow with the current
logic in effect:
1. Query processing starts, the answer is not found in the cache, so
recursion is started. The NS_CLIENTATTR_RECURSING attribute is set.
ns_statscounter_recursclients is incremented (Δ = +1).
2. Recursion completes, returning a CNAME. client->recursionquota is
non-NULL, so the NS_CLIENTATTR_RECURSING attribute remains set.
ns_statscounter_recursclients is decremented (Δ = 0).
3. Query processing restarts.
4. The current QNAME (the target of the CNAME from step 2) is found in
the cache, with a TTL low enough to trigger a prefetch.
5. query_prefetch() attaches to client->recursionquota.
ns_statscounter_recursclients is not incremented because
query_prefetch() does not do that (Δ = 0).
6. Query processing restarts.
7. The current QNAME (the target of the CNAME from step 4) is not found
in the cache, so recursion is started. client->recursionquota is
already attached to (since step 5) and the NS_CLIENTATTR_RECURSING
attribute is set (since step 1), so ns_statscounter_recursclients is
not incremented (Δ = 0).
8. The prefetch from step 5 completes. client->recursionquota is
detached from in prefetch_done(). ns_statscounter_recursclients is
not decremented because prefetch_done() does not do that (Δ = 0).
9. Recursion for the current QNAME completes. client->recursionquota
is already detached from, i.e. set to NULL (since step 8), and the
NS_CLIENTATTR_RECURSING attribute is set (since step 1), so
ns_statscounter_recursclients is decremented (Δ = -1).
Another possible scenario is that after step 7, recursion for the target
of the CNAME from step 4 completes before the prefetch for the CNAME
itself. fetch_callback() then notices that client->recursionquota is
non-NULL and decrements ns_statscounter_recursclients, even though
client->recursionquota was attached to by query_prefetch() and therefore
not accompanied by an incrementation of ns_statscounter_recursclients.
The net result is also an underflow.
Instead of trying to properly handle all possible orderings of events
set into motion by normal recursion and prefetch-triggered recursion,
adjust ns_statscounter_recursclients whenever the recursive clients
quota is successfully attached to or detached from. Remove the
NS_CLIENTATTR_RECURSING attribute altogether as its only purpose is made
obsolete by this change.
(cherry picked from commit f7482b68b9)
this brings DNS_CLIENTINFO_VERSION into line with the subscription
branch so that fixes applied to clientinfo processing can also be
applied to the main branch without diverging.
(cherry picked from commit 737e658602)
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
The old code rejected NSEC that proved the wildcard name existed
(exists). The new code rejects NSEC that prove that the wildcard
name exists and that the type exists (exists && data) but accept
NSEC that prove the wildcard name exists.
query_synthnxdomain (renamed query_synthnxdomainnodata) already
took the NSEC records and added the correct records to the message
body for NXDOMAIN or NODATA responses with the above change. The
only additional change needed was to ensure the correct RCODE is
set.
dns_nsec_noexistnodata now checks that RRSIG and NSEC are
present in the type map. Both types should be present in
a correctly constructed NSEC record. This check is in
addition to similar checks in resolver.c and validator.c.
This commit adds an isc_nm_socket_type() function which can be used to
obtain a handle's socket type.
This change obsoletes isc_nm_is_tlsdns_handle() and
isc_nm_is_http_handle(). However, it was decided to keep the latter as
we eventually might end up supporting multiple HTTP versions.
