#!/bin/sh
#
# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
#
# See the COPYRIGHT file distributed with this work for additional
# information regarding copyright ownership.

if test -n "$PERL"
then
	if $PERL -e "use IO::Socket::INET6;" 2> /dev/null
	then
		TESTSOCK6="$PERL $TOP/bin/tests/system/testsock6.pl"
	else
		TESTSOCK6=false
	fi
else
	TESTSOCK6=false
fi

export LANG=C

. ${TOP}/version

#
# Common lists of system tests to run.
#
# The "stress" test is not run by default since it creates enough
# load on the machine to make it unusable to other users.
# The "dialup", "delzone", and "dupsigs" tests are also not run by
# default because they take a very long time to complete.
#
# The following tests are hard-coded to use ports 5300 and 9953. For
# this reason, these must be run sequentially.
#
# Sequential tests that only run on unix/linux should be added to
# SEQUENTIAL_UNIX in conf.sh.in; those that only run on windows should
# be added to SEQUENTIAL_WINDOWS in conf.sh.win32.
#
SEQUENTIAL_COMMON="ecdsa eddsa tkey"

#
# These tests can use ports assigned by the caller (other than 5300
# and 9953). Because separate blocks of ports can be used for teach
# test, these tests can be run in parallel.
#
# Parallel tests that only run on unix/linux should be added to
# PARALLEL_UNIX in conf.sh.in; those that only run on windows should
# be added to PARALLEL_WINDOWS in conf.sh.win32.
#
# Note: some of the longer-running tests such as serve-stale and
# rpzrecurse are scheduled first, in order to get more benefit from
# parallelism.
#
PARALLEL_COMMON="dnssec rpzrecurse serve-stale \
	acl additional addzone allow-query auth autosign \
	builtin cacheclean case catz cds chain \
	checkconf checknames checkzone \
	cookie database digdelv dlz dlzexternal \
	dns64 dscp dsdigest dyndb \
	ednscompliance emptyzones \
	fetchlimit filter-aaaa formerr forward \
	geoip2 glue idna inline integrity ixfr \
	keepalive legacy limits \
	masterfile masterformat metadata mirror mkeys \
	names notify nslookup nsupdate nzd2nzf \
	padding pending pipelined qmin \
	reclimit redirect resolver rndc rootkeysentinel rpz \
	rrchecker rrl rrsetorder rsabigexponent runtime \
	sfcache smartsign sortlist \
	spf staticstub statistics statschannel stub synthfromdnssec \
	tcp tools tsig tsiggss ttl \
	unknown upforwd verify views wildcard \
	xfer xferquota zero zonechecks"

#
# Set up color-coded test output
#
if [ ${SYSTEMTEST_FORCE_COLOR:-0} -eq 1 ] || test -t 1 && type tput > /dev/null 2>&1 && tput setaf 7 > /dev/null 2>&1 ; then
    COLOR_END=`tput setaf 4`    # blue
    COLOR_FAIL=`tput setaf 1`   # red
    COLOR_INFO=`tput bold`      # bold
    COLOR_NONE=`tput sgr0`
    COLOR_PASS=`tput setaf 2`   # green
    COLOR_START=`tput setaf 4`  # blue
    COLOR_WARN=`tput setaf 3`   # yellow
else
    # set to empty strings so printf succeeds
    COLOR_END=''
    COLOR_FAIL=''
    COLOR_INFO=''
    COLOR_NONE=''
    COLOR_PASS=''
    COLOR_START=''
    COLOR_WARN=''
fi

if type printf > /dev/null 2>&1
then
	echofail () {
		printf "${COLOR_FAIL}%s${COLOR_NONE}\n" "$*"
	}
	echowarn () {
		printf "${COLOR_WARN}%s${COLOR_NONE}\n" "$*"
	}
	echopass () {
		printf "${COLOR_PASS}%s${COLOR_NONE}\n" "$*"
	}
	echoinfo () {
		printf "${COLOR_INFO}%s${COLOR_NONE}\n" "$*"
	}
	echostart () {
		printf "${COLOR_START}%s${COLOR_NONE}\n" "$*"
	}
	echoend () {
		printf "${COLOR_END}%s${COLOR_NONE}\n" "$*"
	}
else
	echofail () {
		echo "$*"
	}
	echowarn () {
		echo "$*"
	}
	echopass () {
		echo "$*"
	}
	echoinfo () {
		echo "$*"
	}
	echostart () {
		echo "$*"
	}
	echoend () {
		echo "$*"
	}
fi

SYSTESTDIR="`basename $PWD`"

echo_i() {
    echo "$@" | while read __LINE ; do
       echoinfo "I:$SYSTESTDIR:$__LINE"
    done
}

echo_ic() {
    echo "$@" | while read __LINE ; do
       echoinfo "I:$SYSTESTDIR:  $__LINE"
    done
}

cat_i() {
    while read __LINE ; do
       echoinfo "I:$SYSTESTDIR:$__LINE"
    done
}

echo_d() {
    echo "$@" | while read __LINE ; do
       echoinfo "D:$SYSTESTDIR:$__LINE"
    done
}

cat_d() {
    while read __LINE ; do
       echoinfo "D:$SYSTESTDIR:$__LINE"
    done
}

digcomp() {
    output=`$PERL $SYSTEMTESTTOP/digcomp.pl "$@"`
    result=$?
    [ -n "$output" ] &&  { echo "digcomp failed:"; echo "$output"; } | cat_i
    return $result
}

#
# Useful variables in test scripts
#

# Default algorithm for testing.
DEFAULT_ALGORITHM=ECDSAP256SHA256
DEFAULT_ALGORITHM_NUMBER=13
DEFAULT_BITS=256

# This is an alternative algorithm for test cases that require more than
# one algorithm (for example algorithm rollover).  Must be different from
# DEFAULT_ALGORITHM.
ALTERNATIVE_ALGORITHM=RSASHA256
ALTERNATIVE_ALGORITHM_NUMBER=8
ALTERNATIVE_BITS=1280

# This is an algorithm that is used for tests against the
# "disable-algorithms" configuration option.  Must be different from above
# algorithms.
DISABLED_ALGORITHM=ECDSAP384SHA384
DISABLED_ALGORITHM_NUMBER=14
DISABLED_BITS=384

#
# Useful functions in test scripts
#

# keyfile_to_keys_section: helper function for keyfile_to_*_keys() which
# converts keyfile data into a configuration section using the supplied
# parameters
keyfile_to_keys_section() {
    section_name=$1
    key_prefix=$2
    shift
    shift
    echo "$section_name {"
    for keyname in $*; do
	awk '!/^; /{
	    printf "\t\""$1"\" "
	    printf "'"$key_prefix "'"
	    printf $4 " " $5 " " $6 " \""
	    for (i=7; i<=NF; i++) printf $i
	    printf "\";\n"
	}' $keyname.key
    done
    echo "};"
}

# keyfile_to_static_keys: convert key data contained in the keyfile(s)
# provided to a *static* "dnssec-keys" section suitable for including in a
# resolver's configuration file
keyfile_to_static_keys() {
    keyfile_to_keys_section "dnssec-keys" "static-key" $*
}

# keyfile_to_initial_keys: convert key data contained in the keyfile(s)
# provided to an *initialzing* "dnssec-keys" section suitable for including
# in a resolver's configuration file
keyfile_to_initial_keys() {
    keyfile_to_keys_section "dnssec-keys" "initial-key" $*
}

# keyfile_to_key_id: convert a key file name to a key ID
#
# For a given key file name (e.g. "Kexample.+013+06160") provided as $1,
# print the key ID with leading zeros stripped ("6160" for the
# aforementioned example).
keyfile_to_key_id() {
	echo "$1" | sed "s/.*+0\{0,4\}//"
}

# nextpart*() - functions for reading files incrementally
#
# These functions aim to facilitate looking for (or waiting for)
# messages which may be logged more than once throughout the lifetime of
# a given named instance by outputting just the part of the file which
# has been appended since the last time we read it.
#
# Calling some of these functions causes temporary *.prev files to be
# created that need to be cleaned up manually (usually by a given system
# test's clean.sh script).
#
# Note that unlike other nextpart*() functions, nextpartread() is not
# meant to be directly used in system tests; its sole purpose is to
# reduce code duplication below.
#
# A quick usage example:
#
#     $ echo line1 > named.log
#     $ echo line2 >> named.log
#     $ nextpart named.log
#     line1
#     line2
#     $ echo line3 >> named.log
#     $ nextpart named.log
#     line3
#     $ nextpart named.log
#     $ echo line4 >> named.log
#     $ nextpartpeek named.log
#     line4
#     $ nextpartpeek named.log
#     line4
#     $ nextpartreset named.log
#     $ nextpartpeek named.log
#     line1
#     line2
#     line3
#     line4
#     $ nextpart named.log
#     line1
#     line2
#     line3
#     line4
#     $ nextpart named.log
#     $

# nextpartreset: reset the marker used by nextpart() and nextpartpeek()
# so that it points to the start of the given file
nextpartreset() {
    echo "0" > $1.prev
}

# nextpartread: read everything that's been appended to a file since the
# last time nextpart() was called and print it to stdout, print the
# total number of lines read from that file so far to stderr
nextpartread() {
    [ -f $1.prev ] || nextpartreset $1
    prev=`cat $1.prev`
    awk "NR > $prev "'{ print }
	 END          { print NR > "/dev/stderr" }' $1
}

# nextpart: read everything that's been appended to a file since the
# last time nextpart() was called
nextpart() {
	nextpartread $1 2> $1.prev.tmp
	mv $1.prev.tmp $1.prev
}

# nextpartpeek: read everything that's been appended to a file since the
# last time nextpart() was called
nextpartpeek() {
	nextpartread $1 2> /dev/null
}

rndc_reload() {
    echo_i "`$RNDC -c ../common/rndc.conf -s $2 -p ${CONTROLPORT} reload $3 2>&1 | sed 's/^/'$1' /'`"
    # reloading single zone is synchronous, if we're reloading whole server
    # we need to wait for reload to finish
    if [ -z "$3" ]; then
	for __try in 0 1 2 3 4 5 6 7 8 9; do
	    $RNDC -c ../common/rndc.conf -s $2 -p ${CONTROLPORT} status | grep "reload/reconfig in progress" > /dev/null || break
	    sleep 1
	done
    fi
}

rndc_reconfig() {
    echo_i "`$RNDC -c ../common/rndc.conf -s $2 -p ${CONTROLPORT} reconfig 2>&1 | sed 's/^/'$1' /'`"
    for __try in 0 1 2 3 4 5 6 7 8 9; do
	$RNDC -c ../common/rndc.conf -s $2 -p ${CONTROLPORT} status | grep "reload/reconfig in progress" > /dev/null || break
	sleep 1
    done
}

# rndc_dumpdb: call "rndc dumpdb [...]" and wait until it completes
#
# The first argument is the name server instance to send the command to, in the
# form of "nsX" (where "X" is the instance number), e.g. "ns5".  The remaining
# arguments, if any, are appended to the rndc command line after "dumpdb".
#
# Control channel configuration for the name server instance to send the
# command to must match the contents of bin/tests/system/common/rndc.conf.
#
# rndc output is stored in a file called rndc.out.test${n}; the "n" variable is
# required to be set by the calling tests.sh script.
#
# Return 0 if the dump completes successfully; return 1 if rndc returns an exit
# code other than 0 or if the "; Dump complete" string does not appear in the
# dump within 10 seconds.
rndc_dumpdb() {
	__ret=0
	__dump_complete=0
	__server="${1}"
	__ip="10.53.0.$(echo "${__server}" | tr -c -d "0-9")"

	shift
	${RNDC} -c ../common/rndc.conf -p "${CONTROLPORT}" -s "${__ip}" dumpdb "$@" > "rndc.out.test${n}" 2>&1 || __ret=1

	for _ in 0 1 2 3 4 5 6 7 8 9
	do
		if grep '^; Dump complete$' "${__server}/named_dump.db" > /dev/null; then
			mv "${__server}/named_dump.db" "${__server}/named_dump.db.test${n}"
			__dump_complete=1
			break
		fi
		sleep 1
	done

	if [ ${__dump_complete} -eq 0 ]; then
		echo_i "timed out waiting for 'rndc dumpdb' to finish"
		__ret=1
	fi

	return ${__ret}
}

# get_dig_xfer_stats: extract transfer statistics from dig output stored
# in $1, converting them to a format used by some system tests.
get_dig_xfer_stats() {
	LOGFILE="$1"
	sed -n "s/^;; XFR size: .*messages \([0-9][0-9]*\).*/messages=\1/p" "${LOGFILE}"
	sed -n "s/^;; XFR size: \([0-9][0-9]*\) records.*/records=\1/p" "${LOGFILE}"
	sed -n "s/^;; XFR size: .*bytes \([0-9][0-9]*\).*/bytes=\1/p" "${LOGFILE}"
}

# get_named_xfer_stats: from named log file $1, extract transfer
# statistics for the last transfer for peer $2 and zone $3 (from a log
# message which has to contain the string provided in $4), converting
# them to a format used by some system tests.
get_named_xfer_stats() {
	LOGFILE="$1"
	PEER="`echo $2 | sed 's/\./\\\\./g'`"
	ZONE="`echo $3 | sed 's/\./\\\\./g'`"
	MESSAGE="$4"
	grep " ${PEER}#.*${MESSAGE}:" "${LOGFILE}" | \
		sed -n "s/.* '${ZONE}\/.* \([0-9][0-9]*\) messages.*/messages=\1/p" | tail -1
	grep " ${PEER}#.*${MESSAGE}:" "${LOGFILE}" | \
		sed -n "s/.* '${ZONE}\/.* \([0-9][0-9]*\) records.*/records=\1/p" | tail -1
	grep " ${PEER}#.*${MESSAGE}:" "${LOGFILE}" | \
		sed -n "s/.* '${ZONE}\/.* \([0-9][0-9]*\) bytes.*/bytes=\1/p" | tail -1
}

# copy_setports - Copy Configuration File and Replace Ports
#
# Convenience function to copy a configuration file, replacing the tokens
# QUERYPORT, CONTROLPORT and EXTRAPORT[1-8] with the values of the equivalent
# environment variables. (These values are set by "run.sh", which calls the
# scripts invoking this function.)
#
# Usage:
#   copy_setports infile outfile
#
copy_setports() {
    # The indirect method of handling the substitution of the PORT variables
    # (defining "atsign" then substituting for it in the "sed" statement) is
    # required to prevent the "Configure" script (in the win32utils/ directory)
    # from replacing the <at>PORT<at> substitution tokens when it processes
    # this file and produces conf.sh.
    atsign="@"
    sed -e "s/${atsign}PORT${atsign}/${PORT}/g" \
        -e "s/${atsign}EXTRAPORT1${atsign}/${EXTRAPORT1}/g" \
        -e "s/${atsign}EXTRAPORT2${atsign}/${EXTRAPORT2}/g" \
        -e "s/${atsign}EXTRAPORT3${atsign}/${EXTRAPORT3}/g" \
        -e "s/${atsign}EXTRAPORT4${atsign}/${EXTRAPORT4}/g" \
        -e "s/${atsign}EXTRAPORT5${atsign}/${EXTRAPORT5}/g" \
        -e "s/${atsign}EXTRAPORT6${atsign}/${EXTRAPORT6}/g" \
        -e "s/${atsign}EXTRAPORT7${atsign}/${EXTRAPORT7}/g" \
        -e "s/${atsign}EXTRAPORT8${atsign}/${EXTRAPORT8}/g" \
        -e "s/${atsign}CONTROLPORT${atsign}/${CONTROLPORT}/g" \
        -e "s/${atsign}DEFAULT_ALGORITHM${atsign}/${DEFAULT_ALGORITHM}/g" \
        -e "s/${atsign}DEFAULT_ALGORITHM_NUMBER${atsign}/${DEFAULT_ALGORITHM_NUMBER}/g" \
        -e "s/${atsign}DEFAULT_BITS${atsign}/${DEFAULT_BITS}/g" \
        -e "s/${atsign}ALTERNATIVE_ALGORITHM${atsign}/${ALTERNATIVE_ALGORITHM}/g" \
        -e "s/${atsign}ALTERNATIVE_ALGORITHM_NUMBER${atsign}/${ALTERNATIVE_ALGORITHM_NUMBER}/g" \
        -e "s/${atsign}ALTERNATIVE_BITS${atsign}/${ALTERNATIVE_BITS}/g" \
        -e "s/${atsign}DISABLED_ALGORITHM${atsign}/${DISABLED_ALGORITHM}/g" \
        -e "s/${atsign}DISABLED_ALGORITHM_NUMBER${atsign}/${DISABLED_ALGORITHM_NUMBER}/g" \
        -e "s/${atsign}DISABLED_BITS${atsign}/${DISABLED_BITS}/g" \
        $1 > $2
}

#
# Export command paths
#
export ARPANAME
export BIGKEY
export CDS
export CHECKZONE
export CYGWIN
export DESCRIPTION
export DIG
export FEATURETEST
export FSTRM_CAPTURE
export GENCHECK
export JOURNALPRINT
export KEYCREATE
export KEYDELETE
export KEYFRLAB
export KEYGEN
export KEYSETTOOL
export KEYSIGNER
export KRB5_CONFIG
export MAKEJOURNAL
export MDIG
export NAMED
export NSEC3HASH
export NSLOOKUP
export NSUPDATE
export NZD2NZF
export PERL
export PIPEQUERIES
export PK11DEL
export PK11GEN
export PK11LIST
export PSSUSPEND
export PYTHON
export RESOLVE
export RNDC
export RRCHECKER
export SAMPLEUPDATE
export SIGNER
export SUBDIRS
export TESTSOCK6
export TSIGKEYGEN
export WIRETEST