Part of #7550
This PR makes appropriate corrections to run pylint on Python 3.
Why not keeping the dependencies unchanged and just run pylint on Python 3?
Because the old version of pylint breaks horribly on Python 3 because of unsupported version of astroid.
Why updating pylint + astroid to the latest version ?
Because this version only fixes some internal errors occuring during the lint of Certbot code, and is also ready to run gracefully on Python 3.8.
Why upgrading mypy ?
Because the old version does not support the new version of astroid required to run pylint correctly.
Why not upgrading mypy to its latest version ?
Because this latest version includes a new typshed version, that adds a lot of new type definitions, and brings dozens of new errors on the Certbot codebase. I would like to fix that in a future PR.
That said so, the work has been to find the correct set of new dependency versions, then configure pylint for sane configuration errors in our situation, disable irrelevant lintings errors, then fixing (or ignoring for good reason) the remaining mypy errors.
I also made PyLint and MyPy checks run correctly on Windows.
* Start configuration
* Reconfigure travis
* Suspend a check specific to python 3. Start fixing code.
* Repair call_args
* Fix return + elif lints
* Reconfigure development to run mainly on python3
* Remove incompatible Python 3.4 jobs
* Suspend pylint in some assertions
* Remove pylint in dev
* Take first mypy that supports typed-ast>=1.4.0 to limit the migration path
* Various return + else lint errors
* Find a set of deps that is working with current mypy version
* Update local oldest requirements
* Remove all current pylint errors
* Rebuild letsencrypt-auto
* Update mypy to fix pylint with new astroid version, and fix mypy issues
* Explain type: ignore
* Reconfigure tox, fix none path
* Simplify pinning
* Remove useless directive
* Remove debugging code
* Remove continue
* Update requirements
* Disable unsubscriptable-object check
* Disable one check, enabling two more
* Plug certbot dev version for oldest requirements
* Remove useless disable directives
* Remove useless no-member disable
* Remove no-else-* checks. Use elif in symetric branches.
* Add back assertion
* Add new line
* Remove unused pylint disable
* Remove other pylint disable
Summary of changes in this PR:
- Refactor files involved in the `certbot` module to be of a similar structure to every other package; that is, inside a directory inside the main repo root (see below).
- Make repo root README symlink to `certbot` README.
- Pull tests outside of the distributed module.
- Make `certbot/tests` not be a module so that `certbot` isn't added to Python's path for module discovery.
- Remove `--pyargs` from test calls, and make sure to call tests from repo root since without `--pyargs`, `pytest` takes directory names rather than package names as arguments.
- Replace mentions of `.` with `certbot` when referring to packages to install, usually editably.
- Clean up some unused code around executing tests in a different directory.
- Create public shim around main and make that the entry point.
New directory structure summary:
```
repo root ("certbot", probably, but for clarity all files I mention are relative to here)
├── certbot
│ ├── setup.py
│ ├── certbot
│ │ ├── __init__.py
│ │ ├── achallenges.py
│ │ ├── _internal
│ │ │ ├── __init__.py
│ │ │ ├── account.py
│ │ │ ├── ...
│ │ ├── ...
│ ├── tests
│ │ ├── account_test.py
│ │ ├── display
│ │ │ ├── __init__.py
│ │ │ ├── ...
│ │ ├── ... # note no __init__.py at this level
│ ├── ...
├── acme
│ ├── ...
├── certbot-apache
│ ├── ...
├── ...
```
* refactor certbot/ and certbot/tests/ to use the same structure as the other packages
* git grep -lE "\-e(\s+)\." | xargs sed -i -E "s/\-e(\s+)\./-e certbot/g"
* git grep -lE "\.\[dev\]" | xargs sed -i -E "s/\.\[dev\]/certbot[dev]/g"
* git grep -lE "\.\[dev3\]" | xargs sed -i -E "s/\.\[dev3\]/certbot[dev3]/g"
* Remove replacement of certbot into . in install_and_test.py
* copy license back out to main folder
* remove linter_plugin.py and CONTRIBUTING.md from certbot/MANIFEST.in because these files are not under certbot/
* Move README back into main folder, and make the version inside certbot/ a symlink
* symlink certbot READMEs the other way around
* move testdata into the public api certbot zone
* update source_paths in tox.ini to certbot/certbot to find the right subfolder for tests
* certbot version has been bumped down a directory level
* make certbot tests directory not a package and import sibling as module
* Remove unused script cruft
* change . to certbot in test_sdists
* remove outdated comment referencing a command that doesn't work
* Install instructions should reference an existing file
* update file paths in Dockerfile
* some package named in tox.ini were manually specified, change those to certbot
* new directory format doesn't work easily with pyargs according to http://doc.pytest.org/en/latest/goodpractices.html#tests-as-part-of-application-code
* remove other instance of pyargs
* fix up some references in _release.sh by searching for ' . ' and manual check
* another stray . in tox.ini
* fix paths in tools/_release.sh
* Remove final --pyargs call, and now-unnecessary call to modules instead of local files, since that's fixed by certbot's code being one layer deeper
* Create public shim around main and make that the entry point
* without pyargs, tests cannot be run from an empty directory
* Remove cruft for running certbot directly from main
* Have main shim take real arg
* add docs/api file for main, and fix up main comment
* Update certbot/docs/install.rst
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Fix comments in readthedocs requirements files to refer to current package
* Update .[docs] reference in contributing.rst
* Move plugins tests to certbot tests directory
* add certbot tests to MANIFEST.in so packagers can run python setup.py test
* move examples directory inside certbot/
* Move CHANGELOG into certbot, and create a top-level symlink
* Remove unused sys and logging from main shim
* nginx http01 test no longer relies on certbot plugins common test
Fixes#7007
Python 3.4 is [EOL](https://www.python.org/dev/peps/pep-0429/), and only Python 3.x version available for CentOS 6 through EPEL is this version, and so is used by `certbot-auto`, the only official way to install Certbot on this platform.
This unpleasant situation becomes a little more uncomfortable, considering that the newest `pip` version (19.2) [just dropped Python 3.4 support](https://github.com/pypa/pip/issues/6685) and will refuse to start on this Python version. We can expect a lot of dependencies to follow this path now.
One direct result of this situation is that a fix to support correctly the ARM platforms requires to upgrade `pip` to 19.2 for `certbot-auto`. So this is not possible right now.
Then, let's upgrade Certbot instances on CentOS 6 to a supported version of Python 3.
This PR proposes a new bootstrap approach for CentOS 6 platform, `BootstrapRpmPython3Legacy`, that will install Python 3.6 from [SCL](https://www.softwarecollections.org) (the latest one available for now on CentOS 6). In term of Python 3 specific bootstrap methods, I take the occasion here to completely separate the bootstrap of CentOS 6 as a legacy system, from the RPM-based newest systems (like Fedora 29+) that are simply dropping support for Python 2.x. This is in prevision of future migration for all systems on Python 3.x, that is a different problematic than supporting old systems.
* Add logic
* Rebuilt letsencrypt-auto
* Fix logic
* Focus on specific packages
* Maintain PATH for further invocations of letsencrypt-auto after bootstrap.
* Various corrections
* Fix farm test for RHEL6
* Working centos6 letsencrypt-auto self tests
* Fix test_sdist for CentOS 6
* Corrections
* Work in progress
* Working configuration
* Fix typo
* Remove EPEL. Add a test.
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Improvements after review
* Improvements
* Add a comment
* Add a test
* Update a test
* Corrections
* Update function return
* Work in progress
* Correct behavior on oracle linux 6.
* Corrections
* Rebuild script
* Add letsencrypt-auto tests for oraclelinux6
* Update tox.ini
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Remove specific code for scientific linux
* Change some variables names
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Various corrections
* Fix tests
* Add a comment
* Update message
* Fix test message
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update scripts
* More focused assertion
* Add back a test
* Update script
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update letsencrypt-auto-source/letsencrypt-auto.template
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Check quiet mode
* Add changelog
* Update letsencrypt-auto-source/tests/oraclelinux6_tests.sh
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
Fixes#7212
This PR forbid os.stat and os.fstat, and fix or provide alternatives to avoid its usage in certbot outside of certbot.compat.filesystem.
* Reimplement private key mode propagation
* Remove other os.stat
* Remove last call of os.stat in certbot package
* Forbid stat and fstat
* Implement mode comparison checks
* Add unit tests
* Update certbot/compat/filesystem.py
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update certbot/compat/filesystem.py
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Handle case where multiple ace concerns a given SID in has_min_permissions
* Add a new test scenario
* Add a simple test for has_same_ownership
* Fix name function
* Add a comment explaining an ACE structure
* Move a test in its dedicated class
* Improve a message error
* Calculate has_min_permission result using effective permission rights to be more generic.
* Change an exception message
* Add comments, avoid to skip a test.
* Update certbot/compat/filesystem.py
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Fix account_tests
* Fix hook executable test
* Remove the temporary decorator @broken_on_windows
* Fix util_test
* No broken unit test on Windows anymore
* More elegant mock
* Fix context manager
* Fix lint
* Fix mypy
* Adapt coverage
* Corrections
* Fix lint
* Adapt coverage
* Update certbot/tests/compat/filesystem_test.py
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update util_test.py
* Fix pylint
* Forbid os.access
* Update os_test.py
* Update os.py
* Fix lint
* Update filesystem.py
* Update filesystem.py
* Update filesystem.py
* Update os.py
* Start fixing tests
* Platform independent hooks
* Fix probe fd close
* Add broken_on_windows for integration tests
* Fix a lot of tests
* Use a python hook script, to prepare cross-platform
* New approach to be compliant with Linux and Windows on hook scripts
* New tests fixed
* Test for permissions on Windows
* Permissions comparison for Windows
* No broken tests in certbot core anymore
* Change mode
* Specific config for appveyor
* Use forked pebble for now
* Various fixes
* Assert file permissions for world on private keys
* Clean code
* Fix several things
* Add integration target
* Optimize integration env
* Re-enable all AppVeyor envs
* Use again official pebble
* Update pebble_artifacts.py
* Set PYTEST_ADDOPTS silently
* Update appveyor.yml
* Pin pywin32 for tests, give a minimal requirement for certbot.
* Remove injection of nginx in PATH
* Clean debug code
* Various cleanup, ensure to remove workspace after tests
* Update tox target
* Improve assertions. Control the keyword echoed in hooks
* Fix for virtualenv on Python 3.7.4 for Windows
* Update certbot-ci/certbot_integration_tests/certbot_tests/assertions.py
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Add conditionally pywin in certbot-ci like in certbot
This PR implements the filesystem.chmod method from #6497.
* Implement filesystem.chmod
* Conditionally add pywin32 on setuptools versions that support environment markers.
* Update apache plugin requirements
* Use a try/except import approach similar to lock
* Add comments about well-known SIDs
* Add main command
* Call filesystem.chmod in tests, remove one test
* Add test for os module
* Update environment marker
* Ensure we are not building wheels using an old version of setuptools
* Added a link to list of NTFS rights
* Simplify sid comparison
* Enable coverage
* Sometimes, double-quote is the solution
* Add entrypoint
* Add unit tests to filesystem
* Resolve recursively the link, add doc
* Move imports to the top of the file
* Remove string conversion of the ACL, fix setup
* Ensure admins have all permissions
* Simplify dacl comparison
* Conditionally raise for windows temporary workaround
* Add a test to check filesystem.chown is protected against symlink loops
Since #7073 for Certbot and letsencrypt/boulder@3918714 for Boulder have landed, the bash scripts that remained after certbot-ci are not useful anymore outside of Certbot.
Only remaining place is the apacheconftest-with-pebble tox target, which leverages pebble-fetch.py script to expose a running ACME server to the apache-conf-test script.
This PR refactor apacheconftest-with-pebble to use certbot-ci instead. Finally, this PR remove the remaining integration tests bash scripts, that are _common.sh, boulder-fetch.py and pebble-fetch.py.
* Disconnect common and boulder-fetch
* Prepare reconnection of apacheconftest to new pebble deployment logic
* Finish the configuration for apacheconftest
* Add executable flag to python script
* Fix shebang
* Delete pebble-fetch.sh
You can see the full test suite running at https://travis-ci.com/certbot/certbot/builds/112291892.
A few noteworthy things:
--fast is included because without, the tests would sometimes reach Travis' 50 minute timeout even with 1 test script per Travis build.
The only script that is run at release time which is not being run here is https://github.com/certbot/certbot/blob/master/tests/letstest/scripts/test_tests.sh because that script runs tests on the packages installed by certbot-auto which won't be updated until midway through a release.
We check TRAVIS_PULL_REQUEST and error out if it is not false for simplicity which should be fine because these tests are never run on PRs. The reason it's more complex to run test farm tests on PRs is the test farm tests need a named branch to pull from and Travis effectively merges the PR into the target branch before running tests complicating this.
I don't think this should block this PRs, but the one final change we may want to make to the current setup is #7071.
* Add encrypted private key.
* Add test farm tests to tox and travis.
* Change magic profile name.
* Further split test farm tests.
* Build local branch.
* more depth
* Connect certbot-ci to travis. Remove old bash files.
* Configure test-everything
* Protect against import error
* Remove unused ignore
* Better handling of urllib3
* Correct path
* Remove a warning
* Correct call
* Protect atexit register execution
* Update docs/contributing.rst
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update docs/contributing.rst
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Add again some bash scripts to avoid breaking to much retro-compatiblity on third party scripts
* Move boulder-v1 and boulder-v2 in nightly tests
* Separate oldest unit tests and oldest integration tests
* Remove try/except
* Test integration included in toxenv
* Add a wait to avoid a transient issue on OCSP status in oldest tests
* Clean travis.yml, split other tests
* Remove useless config
* Update .travis.yml
Co-Authored-By: Brad Warren <bmw@users.noreply.github.com>
* Update tox.ini
* Update tox.ini
* Remove pytest-sugar
* Remove empty pytest.ini, tests are working without it
This PR is the part 4 to implement #6541. It adds the integration tests for the nginx certbot plugin, and corresponds to the certbot-ci translation of certbot-nginx/tests/boulder-integration.sh that is executed for each PR.
As with certbot core tests, tests are written in Python, and executed by pytest, against a dynamic Boulder/Pebble instance setup. Tests are parallelized, of course, and a specific IntegrationTestsContext class, extended the one from certbot core tests, is crafter for these specific tests: its main goal is to setup a specific nginx instance for the current test.
On top of that, I use the test parametrization feature of Pytest, to drastically reduce the size of the actual code: indeed, the 6 tests from the original bash script share the same logic. So using a parametrization, one unique test is written, that is then executed 6 times against 6 different sets of parameters.
Note that the module integration_tests.nginx_tests.nginx_config do the same, but in Python, than certbot-nginx/tests/boulder-integration.conf.sh. The latter will be removed in a future PR, with all other bash scripts.
* Add nginx tests
* Distribute the other_port
* Load a pre-generated key/cert for nginx config
* Correct preload, remove a test, simplify a variable
* Integrate assertion directly in the test function
* Check process is not terminated
* Add spaces in the nginx config
* Add comments
* Use indirection
* Allow external cert
* Add coverage threshold for certbot-nginx
Following #6821, this PR continues to convert certbot integration tests into certbot-ci.
This PR add tests covering checks on L430-447 in tests/certbot-boulder-integration.sh. Previous lines are covered with existing tests, or by #6946, #6947, #6948, #6949.
* Add tests
* Change param
* Increase coverage min to 64%
* Disable OCSP Must-Staple test for Pebble
Following #6821, this PR continues to convert certbot integration tests into certbot-ci.
This PR add tests covering checks on L531 to the end on tests/certbot-boulder-integration.sh. Previous lines are covered with existing tests, or by #6946, #6947, #6948, #6949, #6951, #6952.
* Add tests
* Add load resource
* Separate OCSP in two tests
* Copy new asset
* Load the asset
* Add coverage limit
* First part
* Several optimizations about the docker env setup
* Documentation
* Various corrections and documentation. Add acme and certbot explicitly as dependencies of certbot-ci.
* Correct a variable misinterpreted as a pytest hook
* Correct strict parsing option on pebble
* Refactor acme setup to be executed from pytest hooks.
* Pass TRAVIS env variable to trigger specific xdist logic
* Retrigger build.
* Work in progress
* Config operational
* Propagate to xdist
* Corrections on acme and misc
* Correct subnet for pebble
* Remove gobetween, as tls-sni challenges are not tested anymore.
* Improve pebble setup. Reduce LOC.
* Update acme.py
* Optimize acme ca setup, with less temporary assets
* Silent setup
* Clean code
* Remove unused workspace
* Use default network driver
* Remove bridge
* Update package documentation
* Remove rerun capability for integration tests, not needed.
* Add documentation
* Variable for all ports and subnets used by the stack
* Update certbot-ci/certbot_integration_tests/conftest.py
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update certbot-ci/certbot_integration_tests/utils/acme.py
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update certbot-ci/certbot_integration_tests/utils/misc.py
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update tox.ini
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update certbot-ci/certbot_integration_tests/utils/misc.py
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update certbot-ci/certbot_integration_tests/utils/acme.py
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update certbot-ci/certbot_integration_tests/utils/acme.py
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Update certbot-ci/certbot_integration_tests/conftest.py
Co-Authored-By: adferrand <adferrand@users.noreply.github.com>
* Rename to acme_server
* Add comment
* Refactor in a unique context fixture
* Remove the need of CERTBOT_ACME_XDIST environment variable
* Remove nonstrict/strict options in pebble
* Clean dependencies
* Clean tox
* Change function name
* Add comment about coveragerc specificities
* Change a comment.
* Update setup.py
* Update conftest.py
* Use the production-ready docker-compose.yml file for Pebble
* New style class
* Tune pebble to have a stable test environment
* Pin a dependency
This PR updates and fixes `pebble-fetch.sh` considering latest improvements done on Pebble, to start a working instance.
* Fix the pebble fetch script
* Update pebble-fetch.sh
* Update tox.ini
It was pointed out to me that you can no longer run tox.cover.py directly to run coverage tests on a subset of the packages in this repo.
This happened after we did both of:
1. Factored out --pyargs from the different test files and put it in pytest.ini.
2. Moved the options we added to pytest.ini to tox.ini meaning that --pyargs is not set unless you run the file through tox.
I think the fact that we factored out --pyargs from the files that needed it was a mistake. --pytest is needed by tox.cover.py and install_and_test.py in order to work correctly.
I think CLI options like this which are needed for the file to function should be left in the file directly. Doing anything else in my opinion unnecessarily couples these scripts to other files making them more brittle and harder to maintain.
With that said, I also think CLI options which are not needed (such as --numprocesses) can be left to be optionally added through PYTEST_ADDOPTS.
* Add --pyargs to tox.cover.py.
* Add --pyargs to install_and_test.py.
* Remove --pyargs from tox.ini.
This PR passes the CERTBOT_NO_PIN environment variable to the unit tests tox envs. By setting CERTBOT_NO_PIN to 1 before executing a given tox env, certbot dependencies will be installed at their latest version instead of the usual pinned version.
I also moved the unpin logic one layer below to allow it to be used potentially more widely, and avoid unnecessary merging constraints operation in this case.
As warnings are errors now, latest versions of Python will break now the tests, because collections launch a warning when some classes are imported from collections instead of collections.abc. Certbot code is patched, and warning is ignored for now, because a lot of third party libraries still depend on this behavior.
* Allow to execute a tox target without pinned dependencies
* Correct lint
* Retrigger build.
* Remove debug code
* Added test against unpinned dependencies from test-everything-unpinned-dependencies branch
* Remove duplicated assertion to pass TRAVIS and APPVEYOR in default tox environment.
These tests were running on Ubuntu Precise and Debian Wheezy which have reached their end of life and are no longer maintained by the respective distros. This updates the tests to a newer version of Debian and Ubuntu.
* Remove tests on the deprecated precise.
* Add tests for Xenial.
* update Jessie tests to use Wheezy
* update .travis.yml
Fixes#6585.
I wrote up three suggestions for fixing this at https://github.com/certbot/certbot/issues/6585#issuecomment-448054502. I took the middle approach of requiring the user to provide an ACME server to use. I like this better than the other approaches which were:
> Resolve#5938 instead of this issue.
There is value in these tests as is over the compatibility tests in that they don't use Docker and run on different OSes.
> Spin up a local Python server to return the directory object.
Trying to set up a dummy ACME server seemed hacky and error prone.
Other notes about this PR are:
* I put the Pebble setup in `tox.ini` rather than `.travis.yml` as this seems much cleaner and more natural.
* I created a new `tox` environment called `apacheconftest-with-pebble` that reuses the code from `testenv:apacheconftest` so `apacheconftest` can continue to be used with servers other than Pebble like is done in our test farm tests.
* I chose the environment variable `SERVER` for consistency with our integration tests. I chose to not give this environment variable a default but to fail fast when it is not set.
* I ran test farm tests on this PR and they passed.
PR #6568 removed the --quiet option in pip invocations, because this option deletes a lot of extremely useful logs when something goes wrong. However, when everything goes right, or at least when pip install is correctly executed, theses logs add hundreds of lines that are only noise, making hard to debug errors that can be in only one or two lines.
We can have best of both worlds. Travis allows to fold large blocks of logs, that can be expanded directly from the UI if needed. It only requires to print in the console some specific code, that this PR implements in the pip_install.py script when the build is run in Travis (known by the existence of TRAVIS environment variable).
I also take the occasion to clean up a little tox.ini.
Note that AppVeyor does not have this fold capability, but it can be emulated using a proper capture of stdout/stderr delivered only when an error is detected.
* Fold pip install log on travis
* Global test env
* Export env variable
Certbot relies heavily on bash scripts to deploy a development environment and to execute tests. This is fine for Linux systems, including Travis, but problematic for Windows machines.
This PR converts all theses scripts into Python, to make them platform independant.
As a consequence, tox-win.ini is not needed anymore, and tox can be run indifferently on Windows or on Linux using a common tox.ini. AppVeyor is updated accordingly to execute tests for acme, certbot and all dns plugins. Other tests are not executed as they are for Docker, unsupported Apache/Nginx/Postfix plugins (for now) or not relevant for Windows (explicit Linux distribution tests or pylint).
Another PR will be done on certbot website to update how a dev environment can be set up.
* Replace several shell scripts by python equivalent.
* Correction on tox coverage
* Extend usage of new python scripts
* Various corrections
* Replace venv construction bash scripts by python equivalents
* Update tox.ini
* Unicode lines to compare files
* Put modifications on letsencrypt-auto-source instead of generated scripts
* Add executable permissions for Linux.
* Merge tox win tests into main tox
* Skip lock_test on Windows
* Correct appveyor config
* Update appveyor.yml
* Explicit coverage py27 or py37
* Avoid to cover non supported certbot plugins on Windows
* Update tox.ini
* Remove specific warnings during CI
* No cover on a debug code for tests only.
* Update documentation and help script on venv/venv3.py
* Customize help message for Windows
* Quote correctly executable path with potential spaces in it.
* Copy pipstrap from upstream
Implement an Authenticator which can fulfill a dns-01 challenge using the OVH DNS API. Applicable only for domains using OVH DNS.
Testing Done:
* `tox -e py27`
* `tox -e lint`
* Manual testing:
* Used `certbot certonly --dns-ovh -d`, specifying a credentials file as a command line argument. Verified that a certificate was successfully obtained without user interaction.
* Used `certbot certonly --dns-ovh -d`, without specifying a credentials file as a command line argument. Verified that the user was prompted and that a certificate was successfully obtained.
* Used `certbot certonly -d`. Verified that the user was prompted for a credentials file after selecting dnsimple interactively and that a certificate was successfully obtained.
* Used `certbot renew --force-renewal`. Verified that certificates
were renewed without user interaction.
* Negative testing:
* Path to non-existent credentials file.
* Credentials file with unsafe permissions (644).
* Path to credentials file with an invalid application key.
* Path to credentials file with an invalid application secret.
* Path to credentials file with an invalid consumer key.
* Path to credentials file with missing properties.
* Domain name not registered to OVH account.
Implement an Authenticator which can fulfill a dns-01 challenge using
the Gehirn DNS (Gehirn Infrastructure Service) API.
Applicable only for domains using Gehirn DNS for DNS.
Testing Done:
* `tox -e py27`
* `tox -e lint`
* Manual testing:
* Used `certbot certonly --dns-gehirn -d`, specifying a
credentials file as a command line argument. Verified that a
certificate was successfully obtained without user interaction.
* Negative testing:
* Path to non-existent credentials file.
* Credentials file with unsafe permissions (644).
* Domain name not registered to Gehirn DNS account.
Implement an Authenticator which can fulfill a dns-01 challenge using
the Sakura Cloud DNS API.
Applicable only for domains using Sakura Cloud for DNS.
Testing Done:
* `tox -e py27`
* `tox -e lint`
* Manual testing:
* Used `certbot certonly --dns-sakuracloud -d`, specifying a
credentials file as a command line argument. Verified that a
certificate was successfully obtained without user interaction.
* Negative testing:
* Path to non-existent credentials file.
* Credentials file with unsafe permissions (644).
* Domain name not registered to Sakura Cloud account.
* Added DNS based authenticator plugin for Linode
* Added linode plugin to docs
* Added Dockerfile
* Added .gitignore and readthedocs.org.requirements.txt
* Updated default_propagation_seconds
* Updated according to changes requested
* Bump version to 0.26.0
* Advertise our packages work on Python 3.7.
Now that yaml/pyyaml#126 is resolved, #6170 can be reverted by bumping the pinned version of PyYAML.
You can see this code passing with full macOS and integration tests at https://travis-ci.org/certbot/certbot/builds/400957729.
* Revert "Allow py37 testing (#6170)"
This reverts commit cad95466b0.
* Bump pyyaml pinning to work on Python 3.7.
* Reorganize packages in tox to allow for py37 tests
certbot-dns-cloudflare doesn't currently work in Python 3.7 because it transitively depends on pyYAML which doesn't yet support Python 3.7. See https://github.com/yaml/pyyaml/issues/126 for more info.
* add py37 tox environment
pep8ify
Delint
cover++
test more_info()
Refactor get_config_var
Don't duplicate changes to Postfix config
document instance variables
Always clear save_notes on save
Test deploy_cert and save and add MockPostfix.
Move mock and call to InstallerTest
Add getters and setters
Use postfix getters and setters
protect get_config_var
bump cover to 100%
bump required coverage to 100
s/config_dir/config_utility
Decrease minimum version to Postfix 2.6.
This is the minimum version that allows us to set ciphers to be used with
opportunistic TLS and is the oldest version packaged in any major distro.
Use tls_security_level instead of use_tls.
smtpd_tls_security_level should be used instead according to Postfix documentation.
Test smtpd_tls_security_level conditional
make dunder method an under method
refactor postconf usage
add check_all_output
test check_all_output
Add and test verify_exe_exists
Add PostfixUtilBase
Add ReadOnlyMainMap
Use _get_output instead of _call
Fix split strip typo
Fixes#5490.
There's a lot of possibilities discussed in #5490, but I'll try and explain what I actually did here as succinctly as I can. Unfortunately, there's a fair bit to explain. My goal was to break lockstep and give us tests to ensure the minimum specified versions are correct without taking the time now to refactor our whole test setup.
To handle specifying each package's minimum acme/certbot version, I added a requirements file to each package. This won't actually be included in the shipped package (because it's not in the MANIFEST).
After creating these files and modifying tools/pip_install.sh to use them, I created a separate tox env for most packages (I kept the DNS plugins together for convenience). The reason this is necessary is because we currently use a single environment for each plugin, but if we used this approach for these tests we'd hit issues due to different installed plugins requiring different versions of acme/certbot. There's a lot more discussion about this in #5490 if you're interested in this piece. I unfortunately wasted a lot of time trying to remove the boilerplate this approach causes in tox.ini, but to do this I think we need negations described at complex factor conditions which hasn't made it into a tox release yet.
The biggest missing piece here is how to make sure the oldest versions that are currently pinned to master get updated. Currently, they'll stay pinned that way without manual intervention and won't be properly testing the oldest version. I think we should solve this during the larger test/repo refactoring after the release because the tests are using the correct values now and I don't see a simple way around the problem.
Once this lands, I'm planning on updating the test-everything tests to do integration tests with the "oldest" versions here.
* break lockstep between packages
* Use per package requirements files
* add local oldest requirements files
* update tox.ini
* work with dev0 versions
* Install requirements in separate step.
* don't error when we don't have requirements
* install latest packages in editable mode
* Update .travis.yml
* Add reminder comments
* move dev to requirements
* request acme[dev]
* Update pip_install documentation
* Drop support for EOL Python 2.6
* Use more helpful assertIn/NotIn instead of assertTrue/False
* Drop support for EOL Python 3.3
* Remove redundant Python 3.3 code
* Restore code for RHEL 6 and virtualenv for Py2.7
* Revert pipstrap.py to upstream
* Merge py26_packages and non_py26_packages into all_packages
* Revert changes to *-auto in root
* Update by calling letsencrypt-auto-source/build.py
* Revert permissions for pipstrap.py
* Add tools/merge_requirements.py
* Revert "Fix oldest tests by pinning Google DNS deps (#5000)"
This reverts commit f68fba2be2.
* Add tools/oldest_constraints.txt
* Remove oldest constraints from tox.ini
* Rename dev constraints file
* Update tools/pip_install.sh
* Update install_and_test.sh
* Fix pip_install.sh
* Don't cat when you can cp
* Add ng-httpsclient to dev constraints for oldest tests
* Bump tested setuptools version
* Update dev_constraints comment
* Better document oldest dependencies
* test against oldest versions we say we require
* Update dev constraints
* Properly handle empty lines
* Update constraints gen in pip_install
* Remove duplicated zope.component
* Reduce pyasn1-modules dependency
* Remove blank line
* pin back google-api-python-client
* pin back uritemplate
* pin josepy for oldest tests
* Undo changes to install_and_test.sh
* Update install_and_test.sh description
* use split instead of partition
