This patch adds the ability to set a pointer in the session to an
entry in a stick table which holds various counters related to a
specific pattern.
Right now the syntax matches the target syntax and only the "src"
pattern can be specified, to track counters related to the session's
IPv4 source address. There is a special function to extract it and
convert it to a key. But the goal is to be able to later support as
many patterns as for the stick rules, and get rid of the specific
function.
The "track-counters" directive may only be set in a "tcp-request"
statement right now. Only the first one applies. Probably that later
we'll support multi-criteria tracking for a single session and that
we'll have to name tracking pointers.
No counter is updated right now, only the refcount is. Some subsequent
patches will have to bring that feature.
The conn_retries still lies in the session and its initialization depends
on the backend when it may not yet be known. Let's first move it to the
stream interface.
This is used to disable persistence depending on some conditions (for
example using an ACL matching static files or a specific User-Agent).
You can see it as a complement to "force-persist".
In the configuration file, the force-persist/ignore-persist declaration
order define the rules priority.
Used with the "appsesion" keyword, it can also help reducing memory usage,
as the session won't be hashed the persistence is ignored.
The transparent proxy address selection was set in the TCP connect function
which is not the most appropriate place since this function has limited
access to the amount of parameters which could produce a source address.
Instead, now we determine the source address in backend.c:connect_server(),
right after calling assign_server_address() and we assign this address in
the session and pass it to the TCP connect function. This cannot be performed
in assign_server_address() itself because in some cases (transparent mode,
dispatch mode or http_proxy mode), we assign the address somewhere else.
This change will open the ability to bind to addresses extracted from many
other criteria (eg: from a header).
When trying to spot some complex bugs, it's often needed to access
information on stuck sessions, which is quite difficult. This new
command helps one get detailed information about a session, with
flags, timers, states, etc... The buffer data are not dumped yet.
This is used to force access to down servers for some requests. This
is useful when validating that a change on a server correctly works
before enabling the server again.
This change, suggested by Cyril Bonté, makes a lot of sense and
would have made it obvious that sessid was not properly initialized
while switching to keep-alive. The code is now cleaner.
Up to now, we only had a flag in the session indicating if it had to
work in "connection: close" mode. This is not at all compatible with
keep-alive.
Now we ensure that both sides of a connection act independantly and
only relative to the transaction. The HTTP version of the request
and response is also correctly considered. The connection already
knows several modes :
- tunnel (CONNECT or no option in the config)
- keep-alive (when permitted by configuration)
- server-close (close the server side, not the client)
- close (close both sides)
This change carefully detects all situations to find whether a request
can be fully processed in its mode according to the configuration. Then
the response is also checked and tested to fix corner cases which can
happen with different HTTP versions on both sides (eg: a 1.0 client
asks for explicit keep-alive, and the server responds with 1.1 without
a header).
The mode is selected by a capability elimination algorithm which
automatically focuses on the least capable agent between the client,
the frontend, the backend and the server. This ensures we won't get
undesired situtations where one of the 4 "agents" is not able to
process a transaction.
No "Connection: close" header will be added anymore to HTTP/1.0 requests
or responses since they're already in close mode.
The server-close mode is still not completely implemented. The response
needs to be rewritten as keep-alive before being sent to the client if
the connection was already in server-close (which implies the request
was in keep-alive) and if the response has a content-length or a
transfer-encoding (but only if client supports 1.1).
A later improvement in server-close mode would probably be to detect
some situations where it's interesting to close the response (eg:
redirections with remote locations). But even then, the client might
close by itself.
It's also worth noting that in tunnel mode, no connection header is
affected in either direction. A tunnelled connection should theorically
be notified at the session level, but this is useless since by definition
there will not be any more requests on it. Thus, we don't need to add a
flag into the session right now.
In order to support keepalive, we'll have to differentiate
normal sessions from tunnel sessions, which are the ones we
don't want to analyse further.
Those are typically the CONNECT requests where we don't care
about any form of content-length, as well as the requests
which are forwarded on non-close and non-keepalive proxies.
This patch has 2 goals :
1. I wanted to test the appsession feature with a small PHP code,
using PHPSESSID. The problem is that when PHP gets an unknown session
id, it creates a new one with this ID. So, when sending an unknown
session to PHP, persistance is broken : haproxy won't see any new
cookie in the response and will never attach this session to a
specific server.
This also happens when you restart haproxy : the internal hash becomes
empty and all sessions loose their persistance (load balancing the
requests on all backend servers, creating a new session on each one).
For a user, it's like the service is unusable.
The patch modifies the code to make haproxy also learn the persistance
from the client : if no session is sent from the server, then the
session id found in the client part (using the URI or the client cookie)
is used to associated the server that gave the response.
As it's probably not a feature usable in all cases, I added an option
to enable it (by default it's disabled). The syntax of appsession becomes :
appsession <cookie> len <length> timeout <holdtime> [request-learn]
This helps haproxy repair the persistance (with the risk of losing its
session at the next request, as the user will probably not be load
balanced to the same server the first time).
2. This patch also tries to reduce the memory usage.
Here is a little example to explain the current behaviour :
- Take a Tomcat server where /session.jsp is valid.
- Send a request using a cookie with an unknown value AND a path
parameter with another unknown value :
curl -b "JSESSIONID=12345678901234567890123456789012" http://<haproxy>/session.jsp;jsessionid=00000000000000000000000000000001
(I know, it's unexpected to have a request like that on a live service)
Here, haproxy finds the URI session ID and stores it in its internal
hash (with no server associated). But it also finds the cookie session
ID and stores it again.
- As a result, session.jsp sends a new session ID also stored in the
internal hash, with a server associated.
=> For 1 request, haproxy has stored 3 entries, with only 1 which will be usable
The patch modifies the behaviour to store only 1 entry (maximum).
It is a bit expensive and complex to use to call buffer_feed()
directly from the request parser, and there are risks that some
output messages are lost in case of buffer full. Since most of
these messages are static, let's have a state dedicated to print
these messages and store them in a specific area shared with the
stats in the session. This both reduces code size and risks of
losing output data.
This patch allows to collect & provide separate statistics for each socket.
It can be very useful if you would like to distinguish between traffic
generate by local and remote users or between different types of remote
clients (peerings, domestic, foreign).
Currently no "Session rate" is supported, but adding it should be possible
if we found it useful.
Doing this, we can remove the last BF_HIJACK user and remove
produce_content(). s->data_source could also be removed but
it is currently used to detect if the stats or a server was
used.
The new "show errors" command sent on a unix socket will dump
all captured request and response errors for all proxies. It is
also possible to bound the log to frontends and backends whose
ID is passed as an optional parameter.
The output provides information about frontend, backend, server,
session ID, source address, error type, and error position along
with a complete dump of the request or response which has caused
the error.
If a new error scratches the one currently being reported, then
the dump is aborted with a warning message, and processing goes
on to next error.
It is now possible to list all known sessions by issuing "show sess"
on the unix stats socket. The format is not much evolved but it is
very useful for debugging.
The doc has been updated to reflect the new keyword.
This is the first step in implementing a session dump tool.
A session dump will need restart points. It will be necessary for
it to get references to sessions which can be moved when the session
dies.
The principle is not that complex : when a session ends, it looks for
any potential back-references. If it finds any, then it moves them to
the next session in the list. The dump function will of course have
to restart from that new point.
The listener referenced in the fd was only used to check the
listener state upon session termination. There was no guarantee
that the FD had not been reassigned by the moment it was processed,
so this was a bit racy. Having it in the session is more robust.
It will be very convenient to have an analyser state in the session.
It will always be initialized to zero. The analysers can make use of
it, but must reset it to zero when they leave.
It was a bit awkward to have session.c call return_srv_error() for
HTTP error messages related to servers. The function has been adapted
to be passed a pointer to the faulty stream interface, and is now a
pointer in the session. It is possible that in the future, it will
become a callback in the stream interface itself.
In order to avoid having to call per-protocol logging function directly
from session.c, it's better to assign the logging function when the session
is created. This also eliminates a test when the function is needed, and
opens the way to more complete logging functions.
Now the global variable 'sessions' will be a dual-linked list of all
known sessions. The list element is set at the beginning of the session
so that it's easier to follow them all with gdb.
It is quite hard to track when the current session has already been counted
or discounted from the server's total number of established sessions. For
this reason, we introduce a new session flag, SN_CURR_SESS, which indicates
if the current session is one of those reported by the server or not. It
simplifies session accounting and makes it far more robust. It also makes
it possible to perform a last-minute cleanup during session_free().
Right now, with this fix and a few more buffer transitions fixes, no session
were found to remain after a test.
srv_state has been removed from HTTP state machines, and states
have been split in either TCP states or analyzers. For instance,
the TARPIT state has just become a simple analyzer.
New flags have been added to the struct buffer to compensate this.
The high-level stream processors sometimes need to force a disconnection
without touching a file-descriptor (eg: report an error). But if
they touched BF_SHUTW or BF_SHUTR, the file descriptor would not
be closed. Thus, the two SHUT?_NOW flags have been added so that
an application can request a forced close which the stream interface
will be forced to obey.
During this change, a new BF_HIJACK flag was added. It will
be used for data generation, eg during a stats dump. It
prevents the producer on a buffer from sending data into it.
BF_SHUTR_NOW /* the producer must shut down for reads ASAP */
BF_SHUTW_NOW /* the consumer must shut down for writes ASAP */
BF_HIJACK /* the producer is temporarily replaced */
BF_SHUTW_NOW has precedence over BF_HIJACK. BF_HIJACK has
precedence over BF_MAY_FORWARD (so that it does not need it).
New functions buffer_shutr_now(), buffer_shutw_now(), buffer_abort()
are provided to manipulate BF_SHUT* flags.
A new type "stream_interface" has been added to describe both
sides of a buffer. A stream interface has states and error
reporting. The session now has two stream interfaces (one per
side). Each buffer has stream_interface pointers to both
consumer and producer sides.
The server-side file descriptor has moved to its stream interface,
so that even the buffer has access to it.
process_srv() has been split into three parts :
- tcp_get_connection() obtains a connection to the server
- tcp_connection_failed() tests if a previously attempted
connection has succeeded or not.
- process_srv_data() only manages the data phase, and in
this sense should be roughly equivalent to process_cli.
Little code has been removed, and a lot of old code has been
left in comments for now.
A new member has been added to the struct session. It keeps a trace
of what block of code performs a close or a shutdown on a socket, and
in what sequence. This is extremely convenient for post-mortem analysis
where flag combinations and states seem impossible. A new ABORT_NOW()
macro has also been added to make the code immediately segfault where
called.
This is a first attempt at separating data processing from the
TCP state machine. Those two states have been replaced with flags
in the session indicating what needs to be analyzed. The corresponding
code is still called before and in lieu of TCP states.
Next change should get rid of the specific SV_STANALYZE which is in
fact a client state.
Then next change should consist in making it possible to analyze
TCP contents while being in CL_STDATA (or CL_STSHUT*).
Some people need to inspect contents of TCP requests before
deciding to forward a connection or not. A future extension
of this demand might consist in selecting a server farm
depending on the protocol detected in the request.
For this reason, a new state CL_STINSPECT has been added on
the client side. It is immediately entered upon accept() if
the statement "tcp-request inspect-delay <xxx>" is found in
the frontend configuration. Haproxy will then wait up to
this amount of time trying to find a matching ACL, and will
either accept or reject the connection depending on the
"tcp-request content <action> {if|unless}" rules, where
<action> is either "accept" or "reject".
Note that it only waits that long if no definitive verdict
can be found earlier. That generally implies calling a fetch()
function which does not have enough information to decode
some contents, or a match() function which only finds the
beginning of what it's looking for.
It is only at the ACL level that partial data may be processed
as such, because we need to distinguish between MISS and FAIL
*before* applying the term negation.
Thus it is enough to add "| ACL_PARTIAL" to the last argument
when calling acl_exec_cond() to indicate that we expect
ACL_PAT_MISS to be returned if some data is missing (for
fetch() or match()). This is the only case we may return
this value. For this reason, the ACL check in process_cli()
has become a lot simpler.
A new ACL "req_len" of type "int" has been added. Right now
it is already possible to drop requests which talk too early
(eg: for SMTP) or which don't talk at all (eg: HTTP/SSL).
Also, the acl fetch() functions have been extended in order
to permit reporting of missing data in case of fetch failure,
using the ACL_TEST_F_MAY_CHANGE flag.
The default behaviour is unchanged, and if no rule matches,
the request is accepted.
As a side effect, all layer 7 fetching functions have been
cleaned up so that they now check for the validity of the
layer 7 pointer before dereferencing it.
If the system date is set backwards while haproxy is running,
some scheduled events are delayed by the amount of time the
clock went backwards. This is particularly problematic on
systems where the date is set at boot, because it seldom
happens that health-checks do not get sent for a few hours.
Before switching to use clock_gettime() on systems which
provide it, we can at least ensure that the clock is not
going backwards and maintain two clocks : the "date" which
represents what the user wants to see (mostly for logs),
and an internal date stored in "now", used for scheduled
events.
The dequeuing logic was completely wrong. First, a task was assigned
to all servers to process the queue, but this task was never scheduled
and was only woken up on session free. Second, there was no reservation
of server entries when a task was assigned a server. This means that
as long as the task was not connected to the server, its presence was
not accounted for. This was causing trouble when detecting whether or
not a server had reached maxconn. Third, during a redispatch, a session
could lose its place at the server's and get blocked because another
session at the same moment would have stolen the entry. Fourth, the
redispatch option did not work when maxqueue was reached for a server,
and it was not possible to do so without indefinitely hanging a session.
The root cause of all those problems was the lack of pre-reservation of
connections at the server's, and the lack of tracking of servers during
a redispatch. Everything relied on combinations of flags which could
appear similarly in quite distinct situations.
This patch is a major rework but there was no other solution, as the
internal logic was deeply flawed. The resulting code is cleaner, more
understandable, uses less magics and is overall more robust.
As an added bonus, "option redispatch" now works when maxqueue has
been reached on a server.
When a server terminates a connection, the next session in its
own queue was immediately processed. Because of this, if all
server queues are always filled, then no new anonymous request
will be processed. Consider oldest request between global and
server queues to choose from which to pick the request.
An improvement over this will consist in adding a configurable
offset when comparing expiration dates, so that cookie-less
requests can get either less or more priority.
Due to the way the stats socket work, it was not possible to
maintain the information related to the command entered, so
after filling a whole buffer, the request was lost and it was
considered that there was nothing to write anymore.
The major reason was that some flags were passed directly
during the first call to stats_dump_raw() instead of being
stored persistently in the session.
To definitely fix this problem, flags were added to the stats
member of the session structure.
A second problem appeared. When the stats were produced, a first
call to client_retnclose() was performed, then one or multiple
subsequent calls to buffer_write_chunks() were done. But once the
stats buffer was full and a reschedule operated, the buffer was
flushed, the write flag cleared from the buffer and nothing was
done to re-arm it.
For this reason, a check was added in the proto_uxst_stats()
function in order to re-call the client FSM when data were added
by stats_dump_raw(). Finally, the whole unix stats dump FSM was
rewritten to avoid all the magics it depended on. It is now
simpler and looks more like the HTTP one.
Currently there is a ~16KB limit for a data size passed via unix socket.
It is caused by a trivial bug ttat is going to fixed soon, however
in most cases there is no need to dump a full stats.
This patch makes possible to select a scope of dumped data by extending
current "show stat" to "show stat [<iid> <type> <sid>]":
- iid is a proxy id, -1 to dump all proxies
- type selects type of dumpable objects: 1 for frontend, 2 for backend, 4 for
server, -1 for all types. Values can be ORed, for example:
1+2=3 -> frontend+backend.
1+2+4=7 -> frontend+backend+server.
- sid is a service id, -1 to dump everything from the selected proxy.
To do this I implemented a new session flag (SN_STAT_BOUND), added three
variables in data_ctx.stats (iid, type, sid), modified dumpstats.c and
completely revorked the process_uxst_stats: now it waits for a "\n"
terminated string, splits args and uses them. BTW: It should be quite easy
to add new commands, for example to enable/disable servers, the only problem
I can see is a not very lucky config name (*stats* socket). :|
During the work I also fixed two bug:
- s->flags were not initialized for proto_uxst
- missing comma if throttling not enabled (caused by a stupid change in
"Implement persistent id for proxies and servers")
Other changes:
- No more magic type valuse, use STATS_TYPE_FE/STATS_TYPE_BE/STATS_TYPE_SV
- Don't memset full s->data_ctx (it was clearing s->data_ctx.stats.{iid/type/sid},
instead initialize stats.sv & stats.sv_st (stats.px and stats.px_st were already
initialized)
With all that changes it was extremely easy to write a short perl plugin
for a perl-enabled net-snmp (also included in this patch).
29385 is my PEN (Private Enterprise Number) and I'm willing to donate
the SNMPv2-SMI::enterprises.29385.106.* OIDs for HAProxy if there
is nothing assigned already.
Now when a server has "redir <prefix>" on its config line, any HEAD or GET
request addressing it will lead to a 302 with Location set to "<prefix>"
immediately followed by the relative URI of the incoming request. This makes
it very easy to send redirect to browsers to check remote static servers, as
well as to provide redirection for remote sites when the local one is down.
Several users have complained that when haproxy gets a connection
failure due to an active reject from a server, it immediately
retries, often leading to the same situation being repeated until
the retry counter reaches zero.
Now if a connection error shows up, a turn-around state of 1 second
is applied before retrying. This is performed by faking a connection
timeout in order not to touch much code. However, a cleaner method
would involve an extra state.
This patch extends a little previously added functionality to also
count retries and redispatches for servers. Now it is possible to know
which server causes redispatches as it is not always the same that takes
most retries.
While working with the code I found that redistribute_pending() does not increment
srv->redispatches && be->redispatches. I don't know how to test it but
I think the fix is correct. If not I can withdraw it.
I also extended logs to show how many retries were done and if redispatching
was necessary ('+'). I'm using an additional session flag SN_REDISP to match
redispatched connections. I had to rearrange all defines in session.h to make
more room for it.
The documentation about logs was also fixed a little (sorry, english only),
as current version uses totally different format. BTW: examples are still
outdated, maybe next time...
Finally, I changed %d -> %u for retries/redispatches as those variables
are declared as unsigned.
It is now possible to get CSV ouput from the statistics by
simply appending ";csv" to the HTTP request sent to get the
stats. The fields keep the same ordering as in the HTML page,
and a field "pxname" has been prepended at the beginning of
the line.
The stats page now supports an option to hide servers which are DOWN
and to enable/disable automatic refresh. It is also possible to ask
for an immediate refresh.
There are multiple places where the client's destination address is
required. Let's store it in the session when needed, and add a flag
to inform that it has been retrieved.
Some session flags were clearly related to HTTP transactions.
A new 'flags' field has been added to http_txn, and the
associated flags moved to proto_http.h.
Some parts of HTTP processing were incorrectly called "request" while
they are messages or transactions. The following structure members
have changed :
http_msg.hdr_state => msg_state
http_msg.sor => som
http_req.req_state => removed
http_req => http_txn
