Sometimes we need to be able to change the default kernel socket
buffer size (recv and send). Four new global settings have been
added for this :
- tune.rcvbuf.client
- tune.rcvbuf.server
- tune.sndbuf.client
- tune.sndbuf.server
Those can be used to reduce kernel memory footprint with large numbers
of concurrent connections, and to reduce risks of write timeouts with
very slow clients due to excessive kernel buffering.
The stats socket can now run at 3 different levels :
- user
- operator (default one)
- admin
These levels are used to restrict access to some information
and commands. Only the admin can clear all stats. A user cannot
clear anything nor access sensible data such as sessions or
errors.
This patch implements "description" (proxy and global) and "node" (global)
options, removes "node-name" and adds "show-node" & "show-desc" options
for "stats". It also changes the way the header lines (with proxy name) and
the statistics are displayed, so stats no longer look so clumsy with very
long names.
Instead of "node-name" it is possible to use show-node/show-desc with
an optional parameter that overrides a default node/description.
backend cust-0045
# report specific values for this customer
stats show-node Europe
stats show-desc Master node for Europe, Asia, Africa
The new tune.bufsize and tune.maxrewrite global directives allow one to
change the buffer size and the maxrewrite size. Right now, setting bufsize
too low will block stats sockets which will not be able to write at all.
An error checking must be added to buffer_write_chunk() so that if it
cannot write its message to an empty buffer, it causes the caller to abort.
Creating a frontend for the global stats socket will help merge
unix sockets management with the other socket management. Since
frontends are huge structs, we only allocate it if required.
This Linux-specific option was never really used in production and
has since been superseded by new splicing options brought by recent
Linux kernels.
It caused several particular cases in the code because the kernel
would take care of the session without haproxy being able to do
anything on it, which became hard to handle in the new architecture.
Let's simply get rid of it now that there is a replacement available.
Some people are using haproxy in a shared environment where the
system logger by default sends alert and emerg messages to all
consoles, which happens when all servers go down on a backend for
instance. These people can not always change the system configuration
and would like to limit the outgoing messages level in order not to
disturb the local users.
The addition of an optional 4th field on the "log" line permits
exactly this. The minimal log level ensures that all outgoing logs
will have at least this level. So the logs are not filtered out,
just set to this level.
If we get very large data at once, it's almost certain that it's
worthless trying to read again, because we got everything we could
get.
Doing this has made all -EAGAIN disappear from splice reads. The
threshold has been put in the global tunable structures so that if
we one day want to make it accessible from user config, it will be
easy to do so.
Setting "nosplice" in the global section will disable the use of TCP
splicing (both tcpsplice and linux 2.6 splice). The same will be
achieved using the "-dS" parameter on the command line.
The global tuning options right now only concern the polling mechanisms,
and they are not in the global struct itself. It's not very practical to
add other options so let's move them to the global struct and remove
types/polling.h which was not used for anything else.
Using pipe pools makes pipe management a lot easier. It also allows to
remove quite a bunch of #ifdefs in areas which depended on the presence
or not of support for kernel splicing.
The buffer now holds a pointer to a pipe structure which is always NULL
except if there are still data in the pipe. When it needs to use that
pipe, it dynamically allocates it from the pipe pool. When the data is
consumed, the pipe is immediately released.
That way, there is no need anymore to care about pipe closure upon
session termination, nor about pipe creation when trying to use
splice().
Another immediate advantage of this method is that it considerably
reduces the number of pipes needed to use splice(). Tests have shown
that even with 0.2 pipe per connection, almost all sessions can use
splice(), because the same pipe may be used by several consecutive
calls to splice().
This is the first attempt at moving all internal parts from
using struct timeval to integer ticks. Those provides simpler
and faster code due to simplified operations, and this change
also saved about 64 bytes per session.
A new header file has been added : include/common/ticks.h.
It is possible that some functions should finally not be inlined
because they're used quite a lot (eg: tick_first, tick_add_ifset
and tick_is_expired). More measurements are required in order to
decide whether this is interesting or not.
Some function and variable names are still subject to change for
a better overall logics.
This new parameter makes it possible to override the default
number of consecutive incoming connections which can be
accepted on a socket. By default it is not limited on single
process mode, and limited to 8 in multi-process mode.
The code in haproxy-1.3.13.1 only supports syslogging to an internet
address. The attached patch:
- Adds support for syslogging to a UNIX domain socket (e.g., /dev/log).
If the address field begins with '/' (absolute file path), then
AF_UNIX is used to construct the socket. Otherwise, AF_INET is used.
- Achieves clean single-source build on both Mac OS X and Linux
(sockaddr_in.sin_len and sockaddr_un.sun_len field aren't always present).
For handling sendto() failures in send_log(), it appears that the existing
code is fine (no need to close/recreate socket) for both UDP and UNIX-domain
syslog server. So I left things alone (did not close/recreate socket).
Closing/recreating socket after each failure would also work, but would lead
to increased amount of unnecessary socket creation/destruction if syslog is
temporarily unavailable for some reason (especially for verbose loggers).
Please consider this patch for inclusion into the upstream haproxy codebase.
It is very convenient for SNMP monitoring to have unique process ID,
proxy ID and server ID. Those have been added to the CSV outputs.
The numbers start at 1. 0 is reserved. For servers, 0 means that the
reported name is not a server name but half a proxy (FRONTEND/BACKEND).
A remaining hidden "-" in the CSV output has been eliminated too.
Removed old unused MODE_LOG and MODE_STATS, and replaced the "stats"
keyword in the global section. The new "stats" keyword in the global
section is used to create a UNIX socket on which the statistics will
be accessed. The client must issue a "show stat\n" command in order
to get a CSV-formated output similar to the output on the HTTP socket
in CSV mode.
A new file, proto_uxst.c, implements support of PF_UNIX sockets
of type SOCK_STREAM. It relies on generic stream_sock_read/write
and uses its own accept primitive which also tries to be generic.
Right now it only implements an echo service in sight of a general
support for start dumping via unix socket. The echo code is more
of a proof of concept than useful code.
When one server appears at the same position in multiple backends, it
receives all the checks from all the backends exactly at the same time
because the health-checks are only spread within a backend but not
globally.
Attached patch implements per-server start delay in a different way.
Checks are now spread globally - not locally to one backend. It also makes
them start faster - IMHO there is no need to add a 'server->inter' when
calculating first execution. Calculation were moved from cfgparse.c to
checks.c. There is a new function start_checks() and now it is not called
when haproxy is started in MODE_CHECK.
With this patch it is also possible to set a global 'spread-checks'
parameter. It takes a percentage value (1..50, probably something near
5..10 is a good idea) so haproxy adds or removes that many percent to the
original interval after each check. My test shows that with 18 backends,
54 servers total and 10000ms/5% it takes about 45m to mix them completely.
I decided to use rand/srand pseudo-random number generator. I am aware it
is not recommend for a good randomness but a) we do not need a good random
generator here b) it is probably the most portable one.
The following patch will give the ability to tweak socket linger mode.
You can use this option with "option nolinger" inside fronted or backend
configuration declaration.
This will help in environments where lots of FIN_WAIT sockets are
encountered.
By default, epoll/kqueue used to return as many events as possible.
This could sometimes cause huge latencies (latencies of up to 400 ms
have been observed with many thousands of fds at once). Limiting the
number of events returned also reduces the latency by avoiding too
many blind processing. The value is set to 200 by default and can be
changed in the global section using the tune.maxpollevents parameter.
Using the cttproxy kernel patch, it's possible to bind to any source
address. It is highly recommended to use the 03-natdel patch with the
other ones.
A new keyword appears as a complement to the "source" keyword : "usesrc".
The source address is mandatory and must be valid on the interface which
will see the packets. The "usesrc" option supports "client" (for full
client_ip:client_port spoofing), "client_ip" (for client_ip spoofing)
and any 'IP[:port]' combination to pretend to be another machine.
Right now, the source binding is missing from server health-checks if
set to another address. It must be implemented (think restricted firewalls).
The doc is still missing too.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
