When we look up an dictionary entry in the cache used upon transmission
we store the last result in ->prev_lookup of struct dcache_tx so that
to compare it with the subsequent entries to look up and save performances.
We store pointers to server names dictionary entries in a pre-allocated array of
ebpt_node's (->entries member of struct dcache_tx) to cache those sent to remote
peers. Consequently the ID used to identify the server name dictionary entry is
also used as index for this array. There is no need to implement a lookup by key
for this dictionary cache.
Make usage of the APIs implemented for dictionaries (dict.c) and their LRU caches (struct dcache)
so that to send/receive server names used for the server by name stickiness. These
names are sent over the network as follows:
- in every case we send the encode length of the data (STD_T_DICT), then
- if the server names is not present in the cache used upon transmission (struct dcache_tx)
we cache it and we the ID of this TX cache entry followed the encode length of the
server name, and finally the sever name itseft (non NULL terminated string).
- if the server name is present, we repead these operations but we only send the TX cache
entry ID.
Upon receipt, the couple of (cache IDs, server name) are stored the LRU cache used
only upon receipt (struct dcache_rx). As the peers protocol is symetrical, the fact
that the server name is present in the received data (resp. or not) denotes if
the entry is absent (resp. or not).
We want to send some stick-table data fields stored as strings in dictionaries
without consuming too much memory and CPU. To do so we implement with this patch
a cache for send/received dictionaries entries. These dictionary of strings entries are
stored in others real dictionary entries with an identifier as key (unsigned int)
and a pointer to the dictionary of strings entries as values.
This patch implements peer heartbeat feature to prevent any haproxy peer
from reconnecting too often, consuming sockets for nothing.
To do so, we add PEER_MSG_CTRL_HEARTBEAT new message to PEER_MSG_CLASS_CONTROL peers
control class of messages. A ->heartbeat field is added to peer structs
to store the heatbeat timeout value which is handled by the same function as for ->reconnect
to control the session timeouts. A 2-bytes heartbeat message is sent every 3s when
no updates have to be sent. This way, the peer which receives such a message is sure
the remote peer is still alive. So, it resets the ->reconnect peer session
timeout to its initial value (5s). This prevents any reconnection to an
already connected alive peer.
This patch adds pointer to a struct server to peer structure which
is initialized after having parsed a remote "peer" line.
After having parsed all peers section we run ->prepare_srv to initialize
all SSL/TLS stuff of remote perr (or server).
Remaining thing to do to completely support peer protocol over SSL/TLS:
make "bind" keyword be supported in "peers" sections to make SSL/TLS
incoming connections to local peers work.
May be backported to 1.5 and newer.
This macro should be used to declare variables or struct members depending on
the USE_THREAD compile option. It avoids the encapsulation of such declarations
between #ifdef/#endif. It is used to declare all lock variables.
A lock is used to protect accesses to a peer structure.
A the lock is taken in the applet handler when the peer is identified
and released living the applet handler.
In the scheduling task for peers section, the lock is taken for every
listed peer and released at the end of the process task function.
The peer 'force shutdown' function was also re-worked.
When several stick-tables were configured with several peers sections,
only a part of them could be synchronized: the ones attached to the last
parsed 'peers' section. This was due to the fact that, at least, the peer I/O handler
refered to the wrong peer section list, in fact always the same: the last one parsed.
The fact that the global peer section list was named "struct peers *peers"
lead to this issue. This variable name is dangerous ;).
So this patch renames global 'peers' variable to 'cfg_peers' to ensure that
no such wrong references are still in use, then all the functions wich used
old 'peers' variable have been modified to refer to the correct peer list.
Must be backported to 1.6 and 1.7.
There's no reason to use the stream anymore, only the appctx should be
used by a peer. This was a leftover from the migration to appctx and it
caused some confusion, so let's totally drop it now. Note that half of
the patch are just comment updates.
This patch does'nt add any new feature: the functional behavior
is the same than version 1.0.
Technical differences:
In this version all updates on different stick tables are
multiplexed on the same tcp session. There is only one established
tcp session per peer whereas in first version there was one established
tcp session per peer and per stick table.
Messages format was reviewed to be more evolutive and to support
further types of data exchange such as SSL sessions or other sticktable's
data types (currently only the sticktable's server id is supported).
Since appctx are scheduled out of streams, it's pointless to wake up
the task managing the stream to push updates, they won't be seen. In
fact unit tests work because silent sessions are restarted after 5s of
idle and the exchange is correctly scheduled during startup!
So we need to notify the appctx instead. For this we add a pointer to
the appctx in the peer session.
No backport is needed of course.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
This was inadvertently added by "MEDIUM: checks: Add agent health check".
It appears to have never been used.
Signed-off-by: Simon Horman <horms@verge.net.au>
Support a agent health check performed by opening a TCP socket to a
pre-defined port and reading an ASCII string. The string should have one of
the following forms:
* An ASCII representation of an positive integer percentage.
e.g. "75%"
Values in this format will set the weight proportional to the initial
weight of a server as configured when haproxy starts.
* The string "drain".
This will cause the weight of a server to be set to 0, and thus it will
not accept any new connections other than those that are accepted via
persistence.
* The string "down", optionally followed by a description string.
Mark the server as down and log the description string as the reason.
* The string "stopped", optionally followed by a description string.
This currently has the same behaviour as down (iii).
* The string "fail", optionally followed by a description string.
This currently has the same behaviour as down (iii).
A agent health check may be configured using "option lb-agent-chk".
The use of an alternate check-port, used to obtain agent heath check
information described above as opposed to the port of the service,
may be useful in conjunction with this option.
e.g.
option lb-agent-chk
server http1_1 10.0.0.10:80 check port 10000 weight 100
Signed-off-by: Simon Horman <horms@verge.net.au>
While working on the changes required to make the health checks use the
new connections, it started to become obvious that some naming was not
logical at all in the connections. Specifically, it is not logical to
call the "data layer" the layer which is in charge for all the handshake
and which does not yet provide a data layer once established until a
session has allocated all the required buffers.
In fact, it's more a transport layer, which makes much more sense. The
transport layer offers a medium on which data can transit, and it offers
the functions to move these data when the upper layer requests this. And
it is the upper layer which iterates over the transport layer's functions
to move data which should be called the data layer.
The use case where it's obvious is with embryonic sessions : an incoming
SSL connection is accepted. Only the connection is allocated, not the
buffers nor stream interface, etc... The connection handles the SSL
handshake by itself. Once this handshake is complete, we can't use the
data functions because the buffers and stream interface are not there
yet. Hence we have to first call a specific function to complete the
session initialization, after which we'll be able to use the data
functions. This clearly proves that SSL here is only a transport layer
and that the stream interface constitutes the data layer.
A similar change will be performed to rename app_cb => data, but the
two could not be in the same commit for obvious reasons.
Some parts of the sock_ops structure were only used by the stream
interface and have been moved into si_ops. Some of them were callbacks
to the stream interface from the connection and have been moved into
app_cp as they're the application seen from the connection (later,
health-checks will need to use them). The rest has moved to data_ops.
Normally at this point the connection could live without knowing about
stream interfaces at all.
Instead of hard-coding sock_raw in connect_server(), we set this socket
operation at config parsing time. Right now, only servers and peers have
it. Proxies are still hard-coded as sock_raw. This will be needed for
future work on SSL which requires a different socket layer.
This patch turns internal server addresses to sockaddr_storage to
store IPv6 addresses, and makes the connect() function use it. This
code already works but some caveats with getaddrinfo/gethostbyname
still need to be sorted out while the changes had to be merged at
this stage of internal architecture changes. So for now the config
parser will not emit an IPv6 address yet so that user experience
remains unchanged.
This change should have absolutely zero user-visible effect, otherwise
it's a bug introduced during the merge, that should be reported ASAP.
